Welcome Customer !

Membership

XwbooElectronic ComponentsSensorPressure SensorLong Distance Range Ultrasonic Double Sheet Sensor
  • $item.Title
  • $item.Title

Long Distance Range Ultrasonic Double Sheet Sensor

Yueqing Winston Electric Co., Ltd.

Model
UDC-18GM-400-3E1
Nature of the Manufacturer
Manufacturer
Product Category
Pressure Sensor
Place of Origin
ZheJiang, WenZhou
Long Distance Range Ultrasonic Double Sheet Sensor

 Feature 

  • Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers

  •  No TEACH-IN required

  •  Function indicators visible from all directions

  •  Insensitive to printing, colors, and shining surfaces

  •  Material weight from 10 g/m 2 up to over 2000 g/m 2

  •  Very wide material spectrum, finest papers up to thin sheet metals as well as plastic- and metal foils

  •  Perpendicular or inclined sensor mounting relative to the sheet plane possible

  •  Programmable

Description of sensor functions

The ultrasonic double sheet monitor is used for double sheet detection in all situations in which the automatic distinction between double and single sheets is required in order to protect machines or avoid waste production. The double-sheet monitor is based on the ultrasonic through-beam principle. The following can be detected:
- No sheet, i.e. air,
- Individual sheet
- Double sheet
A microprocessor system evaluates the signals. The appropriate switch outputs are set as a result of the evaluation. Changes in ambient conditions such as temperature and humidity are compensated for automatically. The interface electronics is integrated into a compact M18 metal housing together with a sensor head.

 

Switching on
The sensor is equipped with 6 connections. The functionality of the connections is described in the following table. The function input
(PK) is used to assign parameters to the sensor. (See Output pulse extension, Alignment aid and Program selection). During normal
operation, the function input must always be securely connected with +U B or -U B , to avoid possible interference or improper functionality.

Colour Switching on Comments
BN +U B
WH Switch output for single sheets Pulse width corresponds to the event
BK Switch output for double sheets Pulse width corresponds to the event
GY Switch output for air Pulse width corresponds to the event
PK -U B /+U B Function input for parameter assignment/
pulse prolongation
BU -UB

 

Normal mode
The sensor is working in normal mode if the function input (PK) is applied to -U B or +U B when the power source (Power-On) is supplied,
as shown in the output pulse extension table (see below).
Displays:
LED yellow:      Detection of air
LED green:      Detection of single sheets
LED red:          Detection of double sheets
Switch outputs:
The switch outputs are only active in normal operation!
White:      WH     Single sheet output
Black:      BK      Double sheet output
Gray:       GY       Air output

 

Procedure for assigning parameters
It is possible to switch to additional parameter assignment modes from the display mode:
         Alignment mode -->
         Program selection mode -->
         Alignment aid mode --> (for checking)
When the function input (PK) is applied to -U B (for > 500 ms), the mode changes. When the "Program selection“ mode is active, swit-
ching on function input (PK) on to +U B (for > 500 ms) selects the next program level.
Disconnecting the power supply causes the system to exit the current mode with the selected program change.
The switch outputs are not active while parameters are being assigned to the sensor!

Modes
Amplitude control
During installation, the amplitude control can be used to check whether the ultrasonic amplitude at the receiver is sufficient. If the transmitter is not aligned properly in relation to the receiver, maximum sound energy is not transmitted to the receiver, which may result in the incorrect detection of materials.
When the sensor detects an area of air (yellow LED lights up), the UDC begins to display the strength of the measured amplitude signal:
- if the signal is weak, the yellow LED flashes at low frequency
- the flashing frequency increases in line with the signal strength
- the yellow LED lights up continuously when the signal strength is sufficient.
The single sheet function (green LED) and double sheet function (red LED) are now active. This can be used to check the correct
function of the sensor.
Program selection
In the program selection mode, the current program is displayed by the green LED (number of flashing pulses = program number).
Applying the adjustment input (PK) to +U B (for > 500 ms) causes the next program to be selected in cyclic sequence (program 1 follows through to program 4).

Diagrams           


Dimension          

Additional information          

Connection         

  Yueqing Winston Electric Co., Ltd. is a high-tech enterprise which is engaged in the design, development, and production of low and high voltage electrical products. Our core competencies are Proximity Sensor, Switching power supply, Thermostat, Heater, Frequency inverter, Contactor, Motor soft starter, Circuit breaker, Relay, Timer and other electric components.Our market niche are Europe and America, especially in United States, Brazil, Peru, Britain, France, Italy, Germany, Russia. Because we have competitive advantage, such as superior quality, competitive prices, First-class craft works, safe package, prompt Delivery and First-class sales service.Welcome to visit our company and we sincerely strive to build a long-term business relationship in the basis of mutual benefits. We are trustworthy to be your partner. If there is any questions or special requirement, please don't hesitate to contact us, we will go through all with you.Qualiy is our Culture,Support OEM,ODM,Samples.Corporate Vision: To create and realize their dream of a better platform for all people including shareholders, customers, employees and business partners.Corporate Mission: Improving the quality of life with technology and innovation.
You May Like
Similar Product Recommend