Membership
Help
Henan zhong an electronic detection technology Co., Ltd.
Henan zhong an electronic detection technology Co., Ltd.
Product introduction:
type long tube respirator for a long time in the production of hazardous gas production operations and personnel in hypoxia, full of toxic and harmful gases in the environment of disaster relief personnel to provide respiratory protection, consists of a cart and emergency escape cylinders for 2 people at the same time, a work area up to 50 meters.
Usage method:
The source is composed of 4 cylinders composed of 2 independent groups between the 2 groups of cylinders, cylinder and regulator controlled by one-way valve, high-pressure gas reflux will not produce flow backward in the 2 group cylinder room. The cylinder can be opened only by group by group, and can be opened at the same time. Each group of cylinders is provided with a pressure relief valve, which can discharge the high pressure gas in the high pressure pipe, which is convenient for replacing the gas cylinder, but does not relieve the low pressure gas in the output end of the pressure reducer and the gas in the other group of cylinders.
The source and escape through the waist cylinder valve combination, the direct use of gas moving air under normal conditions. In case of emergency need to evacuate the scene quickly, open the escape cylinder valve, and evacuated to the safety zone.
The source is equipped with 30 meters gas supply pipe 1, 10 meters of gas supply pipe 2, the maximum overlap length of 50 meters. 30 meters on the tube with a Y type of a pass, can be used for the simultaneous use of 2 people in the compressed air source air.
The method of use, remove the special waist straps, according to the wearer's body, adjust, make the waist belt strap, valve, escape bottle position on both sides of the waist of the human body (note the waist valve in the direction toward the top of the socket should be fast, comfortable to wear, not) to prevent arms activity is advisable. The fast moving air supply pipe socket from the bottom to the top is inserted into the quick plug valve on the waist, and then plug the mask - supply valve inserted into the socket on the valve quick waist joint, can also be source and mask before wearing waist straps first wife waist valve directly. Open the cylinder valve of the moving air source, put on the mask, breathe freely before entering the work site.
At the same time as the use of 2 people, 2 people should be completely worn together after entering, and keep the distance and direction, to prevent the occurrence of mutual pull and unexpected supply pipe.
Matters needing attention:
The long tube respirator use personnel should be fully trained before wear. Check the air pressure or meet the working pressure requirements before use, and strict routine wear inspection, found the respirator, source, source or hidden escape failure shall not be forced to put into use. In the use of the process, such as the lack of sensory gas supply, poor breathing, or other discomfort, should immediately withdraw from the scene, or open the evacuation of air evacuation.
The use of the process, should be properly protected long long tube respirator source, gas supply pipe and avoid long, sharp angle, corrosive medium contact or friction and roughness in drag, prevent break, scratch, scratch the supply pipe. If exposed to corrosive media, should be cleaned immediately with clean water, dry, such as gas pipe damage, damage should be replaced immediately.
If the long tube respirator cart can not follow the use of personnel should be arranged to close monitoring personnel monitoring, in order to check the gas source, gas source is depleted in warning and accident notification personnel.