Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberXenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test ChamberLoop Contact Resistance Tester
  • $item.Title
  • $item.Title

Loop Contact Resistance Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Xenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test Chamber
Place of Origin
HuBei, WuHan
1. Measure range:100A 0——20mΩ continuous 300S200A 0——10mΩ continuous 120S300A 0——6mΩ continuous 60S600A 0——3mΩ continuous 60S2.Accuracy: better than 0.5%3.Resolution: 0.1μΩ or 0.01μΩ4.Working mode: continuous measurement5.Display: LCD6.Computer interface: RS232
Brief introduction


This Loop Contact Resistance Tester is a special equipment for measuring the contact resistance and loop resistance of switch, circuit breaker, transformer and other equipment. Loop Contact Resistance Tester adopts a typical four-wire measurement method, apply DC current between the two end knobs of the measured body, and measured the voltage drop generated by the current flowing through the measured body, and then the DC resistance of the measured body is obtained through the ratio of voltage and current.Loop Contact Resistance Tester is mainly composed of constant current source, preamplifier, A/D converter, indicating device and so on.


Features and function


1.Adopting high precision electronic circuit and high performance single chip microcomputer, the instrument has the characteristics of fast measuring speed, stable numerical value and good repeatability.

2.Real-time monitoring and display the field resistance value and current value.

3.The output current of Loop Contact Resistance Tester can last more than 1 minute.

4.Test current from high-precision 100A/200A/300A/600A switching constant-current power supply, manual adjustment,with fast test speed and high accuracy .

5.With function of printing, storage, real-time view data ,etc.

6.Large screen display, menu operation, friendly interface, easy to operate.

7.The micro printer is a thermal printer with fast speed and the surface can be directly installed with printing paper.

8.Loop Contact Resistance Tester has the function of interchanging wiring measurement between positive and negative voltage poles and between positive and negative current poles.

9.With RS232 serial port.


Technical specification


1. Measure range: 100A 0——20mΩ continuous 300S

200A 0——10mΩ continuous 120S

300A 0——6mΩ continuous 60S

600A 0——3mΩ continuous 60S

2.Accuracy: better than 0.5%

3.Resolution: 0.1μΩ or 0.01μΩ

4.Working mode: continuous measurement

5.Display: LCD

6.Computer interface: RS232

7.Pinter: thermal printer

8.Environment:

Temperature: -10℃—50℃

Humidity: < 90%(25℃)

Altitude: ≤1500m

Power frequency: 50HZ±1HZ

9. Consumption power: ≤1000W

10.Size: L 467 mm*W395mm*H260mm

11.Weight: 21.9KG


F.A.Q


1.How long is your delivery time?

It depends on you product.

Conventional products we have it in stock,it can be delivery within 3-5 working days

customized product can be delivery within 10-15 working days.

2.Do you accept OEM order?

Yes, OEM & ODM are acceptable.

3. What's your payment terms?

We accept T/T(50% down payment and 50% paid before delivery), Paypal, Western union, Money Gram and via Alibaba Insurance(Credit card(Visa,Master),E-checking,TT)

4.Can you afford calibration certificate ?

Yes, we can afford calibration certificate issued by third authoritative institution.

5.Do you have Technical Backup to all customers from different countries ?

Sure, we have rich-experienced engineer service you within 24 hours through phone call , ,or on-line communication to solve your problems. And if if necessary, our engineer can visit your company to afford technical support face to face.


Company profile


Wuhan Goldhome Electrical Equipment Co., Ltd .(abbreviated as Goldhome Hipot ) was established in 2008, formerly known as the third production enterprise of the national inspection unit, and then through the reform and recombination, we set up the high voltage testing equipment manufacturer, main products included Transformer tester, ct pt tester, circuit breaker tester, insulation resistance tester, ground resistance tester, relay test set and transformer oil tester,etc .

Goldhome hipot adheres to the” integrity of management, quality-based” concept, dedicated to providing high-quality products and efficiency & perfection after-sales service for our all customs,struggling for the global HV power doctor!

1

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend