Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotorLRA Motors
  • $item.Title
  • $item.Title

LRA Motors

Shenzhen Ineed Youngsun Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Motor
Place of Origin
GuangDong, ShenZhen
Linear resonant drive (LRA) is a vibrating motor that produces oscillating forces on a single shaft. Unlike DC eccentrically rotating mass (ERM) motors, linear resonator drives rely on AC voltage to drive a voice coil that is pressed against a spring-attached moving mass block.Long lifetime, quick response, big vibration force.

LRA Motors structure

LRA Motors' structure

Outline Drawing for LRA MotorsLRA Motors outline drawing

The diameter of the linear vibration motor is 8mm, with 3.2 mm thickness.

Technical performance for LRA Motors

MPN

Rated Voltage

Rated Current

Rated Frequency

Operating

Voltage

Acceleration

LRA0832BE03L151.8Vrms AC≤80mA235Hz0.1~1.9Vrms AC1.2~1.7Grms

Introduction to LRA Motors:

1) This is the newly developed Linear Motor vibrating in direction Z with a very long life time of 1 million cycles at the test mode 2s On 1s Off as one cycle.
2) This Linear Motor also have a very strong acceleration/ vibration force at its peak acceleration value around 1.8G, much stronger than other normal brush type coin motors at 0.6-0.8G usually.
3) This Linear Motor is specially for high-end and high reliable electronic consumer products.
4) When compared to standard brushed ERM vibration motors, LRA’s are higher in price and must be used with external driver IC.
Unlike conventional brushed DC vibration motors, linear resonant actuators must be driven by an AC signal at the devices resonant frequency. A number of companies make IC drivers for linear vibration motors that supply the correct drive signals and contain a library of haptic effects you can choose from. TI is one such company that makes LRA drivers IC’s. TI makes and evaluation board that incorporates the TI DRV2605L haptic driver IC.

LRA Motors

Packaging LRA Motors

100pcs per tray, 8000 pcs per carton

Carton size: 46cm*28.5cm*30.5cm
Gross weight: 8.0kgs/ carton
Inner box bubble, then carton. And then reinforced with plastic pallet for outer packing. Or according to client's requirement.

Shipping Details

Samples Can be shipped within 5 days.

Mass production order leading time according to the actual situatio.

Warranty & Contact US

1. Defective item MUST BE reported and returned within the warranty period.

2.We maintain high standards of excellence and strive for 99% customer satisfaction. Feedback is very important,We hope you can contact us immediately before you give us neutral or negative feedback.

3.If you have any questions, our Customer Service staffs welcome you to or call us. We strive to answer all questions and resolve any problems as quickly as possible.


FAQ


Q: What kind of motors can you provide?

A: We can provide dc motor, dc gear motor including spur gear motor, planetary gear motor, worm gear motor; voltage, free load speed, rated speed, rated torque and size can be customized;

Q: What is the delivery time for samples and mass production?

A: For samples if we don't have material stock, delivery date 15-20days; If with stock, produce date can be 3-5days.

For mass production, normally arrange under schedule, the ealier your order is, the faster we will produce; in slack season delivery date is 25 dasy, busy season we will need more than 30 days if quantity is large.

Q: What spec. shall I provide before sample making?

A: A good questions! Pls tell us spec. of voltage, free-load speed, load speed, rated torque, size spec. or other special requirement; we will provide our best recommend to you;

Q: Is there testing report or motor specification when I get the sample?

A: Yes, we provide the testing report and specification in PDF file after sample is ready.


  Our plants are expanding and developing very fast since establishment.Certificated by ISO9001, ISO14001, and ISO45001 systems, we can support our clients with good quality products and best service.We have been awarded “National Hi-Tech Enterprise".With strong capability in R&D and high efficiency in production, we continuously improve the quality of our products and service to satisfy our clients.We sincerely wish to establish long-term business relationship and grow stronger together with our clients all over the world!OEM and ODM business are welcome.R&D ManagementR&D Equipments - We have special world-class reliability test facilities, measuring equipments and test centers in the industry.R&D Level - Our R&D level has been in the leading position in the industry over a decade and we aim to provide best design solutions to our customers worlwide.R&D Team - We have a professional technical team with a background of over 20 years in the micro motors industry.ProductionProduction Lines: 75-80% of the production lines are automatic processes.Production Jigs: All jigs and tools are 99% developped by ourselves.Production Efficiency: Increased by 15-20% every year in the recent 5 years.Monthly capacity: 10 million+ pieces.Annual output: 50 million+ pieces.Quality Control & Quality TargetFirst Acceptance Yield (PQC→OQC): ≥98%.Finished Products (OQC): 99% inspection.Defective Rate in acutal use from customer side: ≤200PPM.Customer Satisfaction: ≥99%.On-time DeliveryWe always have stable well-trained employees to keep high production efficiency.We always keep a stable inventory level for top customers.We always keep 99% on-time delivery to satisfy all customers.Environmental & Social ActivitiesSave The Earth, Save Our Homeland!We strictly take actions to protect the environment under the instruction of local laws and related industry regulations. All of our products are green products and in compliance with RoHS and REACH.
Similar Product Recommend