Membership
Help
Jiangsu Liangyou Zhengda Co.,Ltd.
Jiangsu Liangyou Zhengda Co.,Ltd.
■ The chipper consists of a base, a knife roll, upper and lower feeding mechanism, feeding device, hydraulic buffer system and electrical control system;
■ The blade is made of special material, high strength and strong wear resistance;
■ The knife roll is processed as a whole, and it is checked by dynamic balance to improve accuracy and run smoothly;
■ The press material system adopts the hydraulic system automatic control, and the feeding system adopts frequency conversion control;
■ The bottom knife seat is made of forgings with high strength and long service life;
■ Patented knife roll structure, the chipping efficiency is increased by 30%-50%, and the main power is reduced by 30%-50%, and the use cost is greatly reduced.


Model
Parameter | LYGX213 | LYGX216 | LYGX218 | LYGX218D | LYGX2110 | LYGX2113 |
knife roll diameter(mm) | 300 | 650 | 800 | 800 | 1000 | 1300 |
Knife roll rotational speed(rpm) | 730 | 592 | 650 | 650 | 550 | 442 |
Fly cutter qty(piece) | 2 | 2 | 2 | 2 | 2 | 3*2 |
Feeding inlet size(mm) | 120*300 | 180*500 | 225*680 | 240*780 | 330*1050 | 400*1050 |
Maximum machining diameter(mm) | 90 | 120 | 160 | 160 | 200 | 230 |
· Feeding Speeds (m/min) | 38 | 37 | 37 | 38 | 37 | 28 |
Output (m³/h) | 3~5 | 10 | 15 | 38 | 75 | 70 |
Main motor(KW) | 30 | 55 | 110 | 132 | 220 | 315 |
Feeding motor power(KW) | 1.1*2 | 3*2 | 4*2 | 4*2 | 7.5*2 | 11*2 |
Hydraulic Station Power(KW) | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 3 |
Fly-cutter:Use alloy tool steel material with good impact toughness and good wear resistance
Bearing :NSK
Reducer: Zhejiang dongli or FDSP custom brand
Shaft type: forge
Motor :Wannan/Siemens (China)