Membership
Help
Zhejiang Volcano electrical technology Co., Ltd
Zhejiang Volcano electrical technology Co., Ltd
Main Functions:
1) Protective Function - It will identify fault current automatically; realize instantaneous current cutoff, time limited current break, regular flow, directional flow, overvoltage, under-voltage, single phase ground protection of small current ground system, and cooling load start and inhibition of open circuit, and other functions.
2) Measurement Function - Measure three-phase current, three-phase voltage, active power, reactive power, active energy, reactive energy, peak/valley electricity, power factor and frequency etc.
3) Controlling Function - It can realize on-site operation and remote control. Meanwhile, achieve fault location of circuit, fault isolation automatically, resume power supply for the circuit without fault rapidly by requirement; realize automatic load shedding under low frequency, capacitor automatic cutting, automatic cutting of backup power, and other controlling functions.
4) Communication Function - It can report fault, operation and controlling information to appointed personnel through wireless public network or special communication network; support various kinds of communication ways and agreement; realize setting parameters modification by handhold PDA. The controller releases the instruction of self-inspection from PDA and feedback the self-inspection information to PDA terminal.
5) Data Record Function - Record, save and run operation and fault information automatically.
6) Synchronous Switching On/Off Function - According to the features of load, it searches zero crossing point automatically; adapt itself to the discreteness of switch parameter and impact of environment factors; realize synchronous switching on/off; restrain over voltage of operation and inrush phenomenon effectively, especially suitable for switching capacitor and transformer.
7) Intelligence Function - It can carry out on-line comprehensive analysis of power network parameters, on-line performance parameter measurement of circuit breaker, and on-line programming; cooperate with the main station of power distribution automatic system; realize the function of remote control management of switch device, and on-site, remote or hierarchical control type power distribution automation system.
Working Condition
| Description | Unit | Using Environment Value | |
| Surrounding Air | Max Temperature | ºC | +50 |
| Min Temperature | -50 | ||
| Max Daily Temperature Difference | K | 30 | |
| Altitude | m | ≤2,000 | |
| Solar Radiation Intensity | W/cm2 | 0.1 | |
| Pollution Class | IV | ||
| Icing-Thickness | mm | 10 | |
| Humidity | Average Value of Daily Relative Humidity | % | ≤100 |
| Average Value of Monthly Relative Humidity | ≤95 | ||
| Earthquake Tolerance Ability | Degree | ≤8 | |

Remark: please contact us if the environment parameters exceed the range as required in above table.