Membership
Help
Dongguan Mintech Electronic Technology Co., Ltd.
Dongguan Mintech Electronic Technology Co., Ltd.

Product Description
MC-1250 with high quality configuration: Here are industrial standard configuration including fixed beam optical laser system, cutting following system, Mitsubishi servo system, imported ball screw, water-cooling system, Red-light pointer,exhaust-air system, off-computer system so as to guarantee high precision and reliability meanwhile make the machine more cost-effective!
MC-1250-150W detailed configuration
Item | Specification | Remark |
Working area | W:1250mm,L:900mm | Machine annealing and precision machining |
Laser tube | 150W | Glass tube is made from Chengdu |
Cutting head | Quick install, precision adjust | Mintech |
fixed beam | beam compensation | Mintech |
Polarizer system | X/Y same cutting gap | Mintech |
Mirror | High reflecting(>99.5%) | from USA |
Machine driven system | X/Y axis ball screw | Import from Taiwan |
X/Y/Z TBI/PMI linear guide | Import from Taiwan | |
Special cooling system | Precision:±0.5℃,protection:compressor protection;water flow;high temp、low temp | S&A/TongFei |
Control system | Off line control | Ruida |
Servo motor | MITSUBISHI | Import from Japan |
Software | Ruida | |
Section exhaust | two section | Mintech |
Main contactor | LS | Import from Korea |
Main solenoid valve | SMC | Import from Japan |
Origin switch | Optoelectronic | Import chip |
Machine cable | High flexible cable | Yichu |
Water cooling mirror | Stable working guarantee | Mintech |
Lens | It is made from Bejing |
Technical specification
PARAMETER | MC-1250-150 | |
Laser output power (W) | 150 | |
M2- Transverse mode quality | M2≤1.1 | |
Worktable dimension(mm) | 1250×900 | |
Worktable load (kg) | 300 | |
Acryl cutting ability(mm) | 30 | |
Dieboard cutting ability(mm) | 12 | |
Speed of positioning (m/min) | 20 | |
Positioning accuracy(mm/m) | ±0.05 | |
Repeatability accuracy(mm) | ±0.05 | |
Travel | X-axis(mm) | 1250 |
Y-axis(mm) | 900 | |
Z-axis(mm) | 60 | |
Power supply(50/60Hz) | Single-phase 220V | |
Full current(A) | 30 | |
Pressure of accessorial gas (MPa) | 0.6 | |
Dimensions(L×W×H) (mm) | L:2110mm W:1610mm H:1140mm | |
Machine net weight (kg) | 600KG | |
Room dimensions(L×W)(mm) | L:2110mm W:1610mm | |
EXW agent price | 7,000 USD | |
Sample of Laser cut

Annex:Environment Requirement | ||
Item | Description | Remark |
Machine floor Space | 2110mm X 1610mm X 1140mm | |
Power request | 1 phases 220VAC±10%/30A | |
Chiller temperature | 15-30℃ | Adjust according to the environment temperature and humidity |
Environment temperature | 15-28℃ | Operational temperature |
Store temperature | >5℃ | |
Relative humidity | <60% | |
Floor requirement | Slab floor should brushed lacquer | Keep away from Shaking source |
Workshop environment | Clean and dustless | |
Computer | P4/256M/WIN2000 or above version | Minimum requirement |
Air compressor | Capacity, 0.7m3; pressure, 7kg/cm3 (100psi) | The dimension of the interface is φ8mm |
Demineralized water or distilled water | 20L | Should be changed every 3 or 4 months |
Package Dimension | 2060mm*1880mm*1450mm | |
Package Weight | 1000KG | |
Main Accessories:
Note:The above terms are necessary for the normal operation. The loss caused by the customer fails to meet the above terms should be taken by the customer. | ||

Product Description
MC-1250 with high quality configuration: Here are industrial standard configuration including fixed beam optical laser system, cutting following system, Mitsubishi servo system, imported ball screw, water-cooling system, Red-light pointer,exhaust-air system, off-computer system so as to guarantee high precision and reliability meanwhile make the machine more cost-effective!
MC-1250-150W detailed configuration
Item | Specification | Remark |
Working area | W:1250mm,L:900mm | Machine annealing and precision machining |
Laser tube | 150W | Glass tube is made from Chengdu |
Cutting head | Quick install, precision adjust | Mintech |
fixed beam | beam compensation | Mintech |
Polarizer system | X/Y same cutting gap | Mintech |
Mirror | High reflecting(>99.5%) | from USA |
Machine driven system | X/Y axis ball screw | Import from Taiwan |
X/Y/Z TBI/PMI linear guide | Import from Taiwan | |
Special cooling system | Precision:±0.5℃,protection:compressor protection;water flow;high temp、low temp | S&A/TongFei |
Control system | Off line control | Ruida |
Servo motor | MITSUBISHI | Import from Japan |
Software | Ruida | |
Section exhaust | two section | Mintech |
Main contactor | LS | Import from Korea |
Main solenoid valve | SMC | Import from Japan |
Origin switch | Optoelectronic | Import chip |
Machine cable | High flexible cable | Yichu |
Water cooling mirror | Stable working guarantee | Mintech |
Lens | It is made from Bejing |
Technical specification
PARAMETER | MC-1250-150 | |
Laser output power (W) | 150 | |
M2- Transverse mode quality | M2≤1.1 | |
Worktable dimension(mm) | 1250×900 | |
Worktable load (kg) | 300 | |
Acryl cutting ability(mm) | 30 | |
Dieboard cutting ability(mm) | 12 | |
Speed of positioning (m/min) | 20 | |
Positioning accuracy(mm/m) | ±0.05 | |
Repeatability accuracy(mm) | ±0.05 | |
Travel | X-axis(mm) | 1250 |
Y-axis(mm) | 900 | |
Z-axis(mm) | 60 | |
Power supply(50/60Hz) | Single-phase 220V | |
Full current(A) | 30 | |
Pressure of accessorial gas (MPa) | 0.6 | |
Dimensions(L×W×H) (mm) | L:2110mm W:1610mm H:1140mm | |
Machine net weight (kg) | 600KG | |
Room dimensions(L×W)(mm) | L:2110mm W:1610mm | |
EXW agent price | 7,000 USD | |
Sample of Laser cut

Annex:Environment Requirement | ||
Item | Description | Remark |
Machine floor Space | 2110mm X 1610mm X 1140mm | |
Power request | 1 phases 220VAC±10%/30A | |
Chiller temperature | 15-30℃ | Adjust according to the environment temperature and humidity |
Environment temperature | 15-28℃ | Operational temperature |
Store temperature | >5℃ | |
Relative humidity | <60% | |
Floor requirement | Slab floor should brushed lacquer | Keep away from Shaking source |
Workshop environment | Clean and dustless | |
Computer | P4/256M/WIN2000 or above version | Minimum requirement |
Air compressor | Capacity, 0.7m3; pressure, 7kg/cm3 (100psi) | The dimension of the interface is φ8mm |
Demineralized water or distilled water | 20L | Should be changed every 3 or 4 months |
Package Dimension | 2060mm*1880mm*1450mm | |
Package Weight | 1000KG | |
Main Accessories:
Note:The above terms are necessary for the normal operation. The loss caused by the customer fails to meet the above terms should be taken by the customer. | ||