Membership
Help
Dongguan Mintech Electronic Technology Co., Ltd.
Dongguan Mintech Electronic Technology Co., Ltd.
Machine configuration list
NO . | Project | Content | Regulation lattice Model | Preparation Note |
1 | Processing range | X-axis machining range | 600mm | |
Y-axis machining range | 500mm | |||
Z-axis machining range | 250mm | |||
2 | Machine parameter index | X, Y, Z axis motion positioning accuracy | 0.008mm | The above position parameters are referenced to the international ISO230-2 and are calibrated using a RENISHAW laser interferometer. Note (1) |
X, Y, Z repeat positioning accuracy | 0.005mm | |||
Maximum displacement speed | 10 m / min | |||
Maximum processing speed | 6 m / min | |||
Total machine weight | About 4500KG | |||
Machine power supply requirements | AC380V/50HZ/3PH 30A | |||
Machine tool gas supply requirements | 0.52MPa | |||
3 | Machine tool main purchase | cast iron | Precision Machining | Aging annealing heat treatment |
4 | Workbench | Cast iron workbench | T-slot 600mm × 500mm | |
Workbench load | 400KG | |||
5 | CNC system | SYNTEC | 21MA bus (E80) | |
6 | Tool change system | Disc type BT30 | 12 tool position | |
7 | Tool setting system | Tool set | automatic | |
8 | Lubrication system | Fuel supply pump | automatic | Use No. 20 lubricant |
9 | motor | X, Y, Z axis | 850W AC servo | Yaskawa, Japan |
10 | Electric spindle | Spindle cooling | Oil cooler | |
Spindle speed | 4000-24000RPM | |||
Spindle power | 7.5 KW | |||
Spindle taper | BT30 | |||
Spindle dynamic balance level | G2.5 | |||
Frequency converter | 7.5KW | |||
11 | guide | X, Y, Z rail guide | Square rail (D30mm) | Taiwan |
12 | transmission | X, Y, Z axis drive | Ball screw (Ø32mm) | Taiwan |
Machine configuration list
NO . | Project | Content | Regulation lattice Model | Preparation Note |
1 | Processing range | X-axis machining range | 600mm | |
Y-axis machining range | 500mm | |||
Z-axis machining range | 250mm | |||
2 | Machine parameter index | X, Y, Z axis motion positioning accuracy | 0.008mm | The above position parameters are referenced to the international ISO230-2 and are calibrated using a RENISHAW laser interferometer. Note (1) |
X, Y, Z repeat positioning accuracy | 0.005mm | |||
Maximum displacement speed | 10 m / min | |||
Maximum processing speed | 6 m / min | |||
Total machine weight | About 4500KG | |||
Machine power supply requirements | AC380V/50HZ/3PH 30A | |||
Machine tool gas supply requirements | 0.52MPa | |||
3 | Machine tool main purchase | cast iron | Precision Machining | Aging annealing heat treatment |
4 | Workbench | Cast iron workbench | T-slot 600mm × 500mm | |
Workbench load | 400KG | |||
5 | CNC system | SYNTEC | 21MA bus (E80) | |
6 | Tool change system | Disc type BT30 | 12 tool position | |
7 | Tool setting system | Tool set | automatic | |
8 | Lubrication system | Fuel supply pump | automatic | Use No. 20 lubricant |
9 | motor | X, Y, Z axis | 850W AC servo | Yaskawa, Japan |
10 | Electric spindle | Spindle cooling | Oil cooler | |
Spindle speed | 4000-24000RPM | |||
Spindle power | 7.5 KW | |||
Spindle taper | BT30 | |||
Spindle dynamic balance level | G2.5 | |||
Frequency converter | 7.5KW | |||
11 | guide | X, Y, Z rail guide | Square rail (D30mm) | Taiwan |
12 | transmission | X, Y, Z axis drive | Ball screw (Ø32mm) | Taiwan |