Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineMicro Ohm Meter
  • $item.Title
  • $item.Title

Micro Ohm Meter

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
The measuring range of the Micro Ohm Meter is 10uΩ-2.00kΩ. The Micro Ohm Meter generates a high-precision constant current through the DUT for four-terminal measurement. The lead error is effectively deducted, and it is suitable for users to make high-precision measurement.
I.Overview


The Micro Ohm Meter uses a digital tube display, which can test various resistances such as various wires, transformers, motors, switches, and relays. The measuring range of the instrument is 10uΩ-2.00kΩ. The instrument generates a high-precision constant current through the DUT for four-terminal measurement. The lead error is effectively deducted, and it is suitable for users to make high-precision measurement. Because of the use of DC testing, it is particularly suitable for copper resistance measurement of various transformers and inductances. This Micro Ohm Meter expands the functions of similar instruments, adopts no relay to switch the range, and has Short-circuit data protection function.


II.Features


1. Test value display: Five-digit display: maximum 19999 characters, LED

Sorting result display: display the result in the sorting instruction box;

You can use the 〖↑〗, 〖↓〗 keys to set the value of sorting file displayed by the count value + and -.

2. Measuring range: 1uΩ~200.00kΩ (divided into eight test ranges).

3. Over-range display: The sorting results of HIGH, PASS, and LOW lights are "Upper Over", "Qualified", and "Low Over".

4. Test speed: 10-15 times/sec.

5. Number of sorting files: 3 sorting.

8. Zero calibration: The instrument has been calibrated with zero base for each range. When the zero base changes due to various reasons, this function can be used to calibrate the instrument.

9. Range selection (Range):

1>. Automatic (Auto)

2>. Range In the setting mode, it is used as a function key to select the setting parameters, and the measurement range is changed during the sorting test.

In the sorting measurement, the instrument will not automatically select the range. At this time, the range can be changed by pressing the "range" key. Press the "Range" keyboard once to increase the range by one level. When in the 7th level, the range changes to the first level.

3>. Hold: The selection range is 1~5, and the corresponding range is 200mΩ~2kΩ (2511)

The selection range is 1~7, and the corresponding range is 200mΩ~200kΩ (2512)

The selection range is 1~8, and the corresponding range is 20mΩ~200kΩ (2512A)

(With signal output interface) The selection range is 1~9, and the corresponding range is 20mΩ~2MΩ (2512B)


III. Conditions of use


1. Power supply: Power supply voltage: AC 220V±10% Power supply frequency: 50Hz±5%

2. Ambient temperature and humidity:

Temperature: 20~26℃, humidity ≤75RH, meet the measurement accuracy requirements;

Temperature: 10~35℃, humidity ≤85RH, the instrument can be operated and measured.

3. Volume: 300×110×280mm (W×H×D)

4. Weight: about 2.5kg


IV. Technical indicators


Sn.

Range

Measuring range

Resolution

Current

Open circuit voltage

Precision

1

20 mΩ

1uΩ~20mΩ

1uΩ

1A

< 5.0V

±0.1%+3

2

200mΩ

10uΩ~200mΩ

10uΩ

100mA

3

2Ω

100uΩ~2Ω

100uΩ

100mA

4

20Ω

1mΩ~20Ω

1mΩ

10mA

5

200Ω

10mΩ~200Ω

10mΩ

1mA

6

2KΩ

100mΩ~2kΩ

100mΩ

100uA

< 1.0V

7

20KΩ

1Ω~20kΩ

1Ω

100 uA

8

200KΩ

10Ω~200kΩ

10Ω

10 uA



range

20

mΩ

200

mΩ

2 Ω

20 mΩ

200

mΩ

2 Ω

20 KΩ

200 KΩ

2 MΩ

9-RANGE

Temperature Coefficient

100ppm

50ppm

50ppm

error


2. Measurement terminal mode: five terminals: HD, HS, LS, LD, GND

3. Test speed: 10~20 times/sec

Note: The actual test speed is also related to the measured value, sorting, zeroing, range, etc.


V. Issues that should be paid attention to during the test


1. Power-on warm-up: The instrument must be warmed up for more than 10 minutes before the test is turned on, so as to wait for the internal circuit electrical parameters of the instrument to stabilize before performing the test.

2. Zero point and clearing: When using two ranges of 20mΩ and 200mΩ, you should first clear them before testing, but generally do not need to be cleared in other ranges.

3. During the test, the user can select the range first, and then clamp the test clips to each other, so that the S+ end and the S- end are in direct contact, and the D+ end and the D- end are in direct contact, and keep good contact. If the instrument display is not zero Please press the clear key on the front panel, the clear ON indicator will light up and the instrument will be cleared.

4. Since the Micro Ohm Meter adopts the four-terminal measurement method, when clearing the zero, the user must make the S+ terminal of the instrument directly contact the S- terminal, and the D+ terminal and the D- terminal directly. Specifically: the two test clamps are made to directly contact the two metal sheets with the lead-out test line, and the two metal sheets without the lead-out test line are directly contacted. Otherwise, in the two ranges of 20mΩ and 200mΩ, the instrument will display a very unstable base due to the extremely high gain of the instrument.

5. The calibration parameters of all devices in the Micro Ohm Meter are stored in the AT28C16EEPTOM integrated circuit, so many integrated circuits and electronic components in the instrument should not be replaced randomly, otherwise it may not match the internal storage parameters of the AT28C16, resulting in incorrect measurement.

6.Micro Ohm Meter does not allow testing of live test pieces!

7. The machine crashes or data jumps or other unreasonable phenomena during the startup or use process. Reset: Turn off first, then turn on at the same time by holding down the setting button! Please do not turn the power on or off quickly when turning on or off.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend