Membership
Help
Ningbo Hyconnect Communication Technology Co., Ltd.
Ningbo Hyconnect Communication Technology Co., Ltd.
P/N: HT-N5684R
Operation Instrucitons
Cutting modular cable:
Place the single-bladed side of the tools' cutter facing you and cut the modular cable to the desired length. Make sure to cut the ends of hte cord straight across, not diagonally
Stripping modular cable:
a: Insert 4P/6P cable into the 2 bladed side of the tool's stripper unit it touches the stop guide
b: Insert 8P/1 OP cable into the 2 bladed side of hte tool's stripper and let it extend a little past the lower cut blade
Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Remove the outer jacket, insert and stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end
Place modular plug with cabel into the tool's holder. Be Sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
Remove hte crimped plug from the tool
