Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotorMotor Single Phase 1hp
  • $item.Title
  • $item.Title

Motor Single Phase 1hp

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
The ML series dual-value capacitor aluminum shell motor single phase 1hp adopts the latest international design and is developed from high-quality materials according to IEC related standards.

Product Introduction

The ML series dual-value capacitor aluminum shell motor single phase 1hp adopts the latest international design and is developed from high-quality materials according to IEC related standards. It has good performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.


Product Detail



Motor Type: motor single phase 1hp

Output Power: 0.12 kW - 4 kW

Frame Size: IEC 63 - 112

Number of Poles: 2 / 4

Voltage: 220V / 230V / 240V (based on customers` requirements)

Frequency: 50 or 60 Hz

Protection Level: IP54 or IP55

Insulation Class: B/F

Cooling Method: ICO141

Working Mode: Continuous (S1)


Product Parameter (Specification)



motor single phase 1hp

image001

Production Features


image001

Know More Us


image006

Why Us


image008

Service and Packing


image009

About Us



Maintenance of motor brushes and maintenance of motor dust removal


(1) The brushes used by the entire motor must be of the same batch, otherwise the brushes of the entire motor should be replaced.

(2) Check the brush holding pressure frequently to ensure that the brush pressure is roughly equal and the pressure is suitable for the standard.

(3) For those brushes in the 0 position/dead corner, loosen the screws that fasten the brush holder, rotate the brush holder to align the brushes with the window, and then exchange them. The important thing is that after the replacement, the brush holder must be reset according to the positioning mark.

(4) When replacing ShuangPin brushes, pay attention to the order of the front and back. Any change of the two positions will affect the normal operation of the brushes, or even worsen the commutation of the brushes in severe cases.

(5) The contact surface between the brush and the commutator must be in good agreement (ensure that the contact surface of the brush is not less than 80% of the theoretical contact surface, and the brush can move freely in the brush holder). For this reason, replace the brush with a new one. Should be ground. After grinding, remove all brush powder and debris, and use a clean and dry vacuum cleaner to vacuum.

(6) Motors with brushes exchanged should first run for 2-4 hours under light load conditions to achieve better contact.

(7) The distance between the bottom edge of each brush holder and the surface of the commutator is about 3mm. If the commutator is worn or turned, the brush holder should be moved in time to keep it in a good position.

(8) The brush rod is firmly fixed on the brush holder by screws. The relative position of the brush rod to the center should be strictly verified; unless there is an accident such as a ground breakdown, it is generally not to be detached. Disassemble as a whole.

(2) Undervoltage protection

When the grid voltage drops, the motor runs under undervoltage. Since the motor load has not changed, the motor torque decreases under undervoltage, and the stator winding current increases, which affects the normal operation of the motor or even damages the motor. At this time, the power supply is cut off with a protective device, which is undervoltage protection. Electrical appliances that realize undervoltage protection include contactors and electromagnetic voltage relays. The fuse and thermal relay cannot be undervoltage protection, because the motor is running under undervoltage. The increase of the stator winding is not enough to make the fuse and thermal relay operate, so these two kinds of electrical appliances cannot be protected against undervoltage.




Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend