Welcome Customer !

Membership

XwbooMachine ToolSpecial Machine ToolsLaser Welding Machinemould laser welding machine
  • $item.Title
  • $item.Title

mould laser welding machine

Zhengzhou Tianzheng Technology Development Co., Ltd.

Model
Power
Nature of the Manufacturer
Other
Product Category
Laser Welding Machine
Place of Origin
,
mould laser welding machine

Working Principle:

Mould welding machine is one of laser welding machine, so the principle is same. It use the high energy laser burst heat the tiny area of the material, the laser energy spread into the material through heat conduction, the material melt then form the molten pool. This is the new method to weld thin material, precision parts especially. This method can reach to dot pin welding, butt welding, overlap welding, sealed welding and so on. small width of welding part, small area effected by energy, small deformation, high welding speed, welding surface smooth and beautiful. No need or only simple handle the welding part. No air hole, it can be control precision, easy to achieve automation. So far we have own huge power laser welding machine, it can process on the thick material.

Character:

Mould laser welding machine display by large screen LCD, make the operator easy to learn and operate. This machine also uses glyph programming function, reach to multi mode operation, repair to the majority material.

Not only the small heat affected zone, low oxidation rate, but also no blowhole, porosity and other phenomena. The repaired mould appearance no bump phenomenon, no deformation.

Components:

It is important to pay attention to how to meet the repair accuracy quality when the machine work. The mould laser welding machine control system is the key.

1. Using 10X or 15X microscope monitor operation.

2. Mould laser welding machine power own waveform adjustable function, suit for different material. Such as: die steel, stainless steel, copper, aluminum and other.

3.It can be monitored by CCD (imaging system), besides the operator observe the object by microscope, the non operator can watch the whole welding process on the screen. This device is conducive to train and show on the non operator and to improve the promotion of laser welding technology.

4. The machine can melt the different size wire, the diameter range from 0.2 to 0.8mm.

5. The argon be used to protect the mould laser welding machine. And the program should be argon first, laser then. this way to prevent the first pulsed laser oxidation during the continuous processing.

6. The mould laser welding machine power can be set the parameters: current 50-400A, pulse width 0.1-20MS, frequency 0-50. Normal welding mould machining parameters as follows: current: 90-120; width: 4-6; frequency 5-10. Weld on the beryllium copper or aluminum, the current increased 30-50A.

7. It is the common problem that the welding parts surrounding has bite marks.

It need to use the laser air way to fight back the welding area to cover the bite marks. light spot excess the edge of welding area 0.1mm is ok.

Application:

Mould laser welding machine weld or repair for the cracks and chipping and edge of the stainless steel and other hard material with 50-60 Rockwell's temperature; high accuracy rate, the laser spot diameter is only 0.2mm~1.5mm; heating surface volume is small, the work piece can not be deformed.

Zhengzhou Tianzheng Technology Development Co., Ltd. was established in 1998. Our company is specialized on high-tech marking equipment. Now the company has four departments: computer division, marking machine division, NC transformation division and advertising equipment. About 100 employees work here.Main products: fiber laser marking machine, diode pump laser marking machine, CO2 laser marking machine, laser printing machine, pneumatic marking machine serious(plane pneumatic marking, flange pneumatic marking handheld pneumatic marking and so on), laser welding machine serious.Products are widely used on auto, motorcycle accessories, electric vehicle fittings, pumps, mechanical equipment, flange, electrical equipment, metal fittings and so on. Providing an industrial solution for product identification and traceability, so as to enhance the image of the product. The marking machine is suitable for various material. Metal such as steel, stainless steel, gold, sliver, aluminum copper, alloy, organic material such as plastic, wood, glass, rubber or non metal plate parts of plane and cylindrical work piece."Quality First, Top Service” is our company business philosophy, We combine product structure with the user's actual demand, provide personalized service and technical support for the new and old customers. Our all staff always adhere to diligent and rigorous, realistic and innovative spirit. With high quality and good service, we offer best products for our home and foreigner customers.We are looking forward to cooperating with you.
You May Like
Similar Product Recommend