Membership
Help
Shenzhen Ho-link Technology Co., Limited
Shenzhen Ho-link Technology Co., Limited
Overview
The Multi-function fiber optical converter is developed and produced by our company independently, which adopts the most advanced digital optical fiber transmission technology in the world. It combines 4 channels bidirectional video, 8 channels forward contact closure, 8 channels reverse contact closure, 2 channels bidirectional RS485, 2 channels RS232, 2 channels telephone, 4 channels 10/100/1000M ethernet (shared) provides synchronous, distortion-free, high-quality transmission over single-core optical fiber.
Multi-function fiber optical converter adopts full digital video with uncompressed transmission technology, which meets the needs of users, easy installation, no on-site adjustment is needed, with imported components for optical module and core circuit, it ensures stable performance, and suitable for different working environment.
For IP supermarkets, residential areas, military and government units, the equipment uses a large scale integrated circuit design, simple design, easy to install and debug, maintenance free and other advantages, it is suitable for major communication operators, government and enterprises and institutions. The multi-function fiber optical converter uses the whole industrial wide temperature range design, at the same time because of the use of optical fiber as transmission medium, it performs well in high temperature and also with cold resistance, it can effectively prevent strong electromagnetic radiation interference, lightning, electric shock and power surge, communication quality is stable and reliable.
The multi-function fiber optical converter is widely used in IP supermarkets, residential areas, military government units and major communication operators, government and enterprises and institutions.
Features
1.Independent 1U rack structure
2.Supports one core optical transmission with 4 channels of bidirectional analog video + 4 channels of gigabit ethernet sharing + 2 channels telephone + 8 channels bidirectional contact closure + 1 channel of bidirectional RS485 data + 1 channel bidirectional RS232 data signal
3.No compression, real-time signal transmission
4.Advanced circuit design, full hardware scheme, to ensure the reliability, consistency and stability of equipment
5.Power and other parameter status indicator to monitor system operating status
6.Support single-mode or multi-mode fiber transmission (users need to confirm the transmission fiber type)
7.Provides common FC, SC, and LC optical interfaces
8.Single mode standard transmission 20KM; The maximum transmission distance without relay up to 80KM
9.No software settings, support plug and play function, support hot swap
10.Built-in surge and static protection, level-three lightning protection design;
11.Suitable for extremely high and low temperature and other industrial harsh environment;
12.Industrial design, high reliability;
13.Support user customization and OEM
Technical Indexes
Features | |
Transmission signal type: video, data, contact closure, ethernet and telephone signal | |
Fiber Channel: 1 channel | |
Fiber | |
Wavelength | 1310-1550nm |
Bit rate | 2.5Gbps |
Tx power | >-8db |
Rx sensitivity | >-24db |
Fiber connector | FC(SC/ST optional) |
Video | |
Video interface channel | 4 channels bidirectional video |
Video format | PAL/NTSC/SECAM automatic compatibility |
Video bandwidth | 6MHz |
Video sampling | 20MHz high-speed sampling |
Differential gain | DG < 1% (typical value) |
Differential phase | DP < 0.7° (typical value) |
Video signal-to-noise ratio | S/N ≥67dB (weighted) |
Video interface | BNC |
Ethernet | |
Ethernet channel | 4 channels gigabit sharing |
Ethernet bandwidth | Adaptive 10/100/1000m rate |
Standard protocol | IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
Physical interface | RJ45 |
Data | |
RS232 | 2 channel (full duplex) |
RS485 | 2 channel (half duplex) |
Interface signal | RS232/485 |
Bit rate | ≤0~384Kbps |
Data physical interface | Industrial terminal |
Contact Closure | |
Input electrical parameters | Dry node, not charged (short or disconnected) |
Output electrical parameters | Dry node, not charged (short or disconnected) |
Output relay maximum switching voltage | 250VAC/220VDC
|
Maximum switching current of output relay | 2A |
Mechanical durability of output relay | 100,000,000times |
Maximum output power of relay | 60W |
Open / closed | Always open |
Physical interface | Industrial terminal |
Telephone | |
Telephone interface signal | FXO-PABX/FXS |
Voice bandwidth | 8KHz |
Distortion | <1% |
SNR(signal to noise ratio) | >95dB |
FXC
| Ringing voltage 75V |
Ring frequency 25HZ | |
FXO
| Two-wire input impedance 600 ω (off-hook) |
Return loss: 40 db | |
Ringing detection voltage: 35v | |
Physical interface | RJ11 |
Power | |
Adapt to power supply range | AC100-240V 50/60Hz |
Power supply mode | Built-in power supply |
Power consumption | <30W |
Mechanical index | |
Chassis | Aluminum alloy |
Dimensions | 440*200*45mm |
Product net weight | 1.45kg/pcs |
Installation | 1U case |
Other index | |
Operating temperature | -20 to 75°C |
Storage temperature | -40 to 85°C |
Relative humidity | 5 to 95% (non-condensing) |
MTBF | >100,000 hours |