Membership
Help
Ningbo Hyconnect Communication Technology Co., Ltd.
Ningbo Hyconnect Communication Technology Co., Ltd.
P/N: HT-2008R
Ratchet type: squeeze handles until it stops to open the handles
Insert cable between stripper blades
1a: Insert 4Por 6P cable from the top end of the stripper black unitl it touches the stop guide(stripping length 6mm)
1b: Insert BP cable between stirpper blades and let it extend a little past hte lower cutter blade
Squeeze the handles, cable must be kept perpendicular and pull from the tool.
Remove the jacket inser the stripped cable into the plug. Make sure both side wire the same
Place modular plug with cabel into the tool's holder. Make sure the stripped wire is between the tab and gold contact. Squeeze handles until it stops
Remove the crimped plug from the tool
During the crimping process, you may turn the screw on the ratchet in counterclockwise to stop the incorrect operation(RATCHET RELEASED)
To crimp "DEC" plug, folow step 1 to step 3
Remove hte screw on the left side of the 6P holder, insert the "DEC" plug and cable into the 6P holder and squeeze handles till it stops.