Membership
Help
ZHANG JIA KOU ENVIRONMENTAL PROTECTION EQUIPMENT MANUFACTURING CO., LTD
ZHANG JIA KOU ENVIRONMENTAL PROTECTION EQUIPMENT MANUFACTURING CO., LTD
operating principle
In the use of water treatment on the multi-media filter, the common filter materials are: anthracite, ceramsite, quartz sand, activated carbon, manganese sand and other filter materials, if the multi-media filter is loaded with two kinds of fillers also known as double media filter or double filter material filter, multi-media filter is mainly used to remove suspended substances, solid particles in the water. Suspended solids are non-colloidal solids that are insoluble in water and can be deposited when conditions permit. The effect of the filter is measured by the weight difference before and after the filter media intercepts the suspended solid. Generally, use theD = 0.5-1.0mm, 1.0-2.0mm, 2.0-4.0mm cushion filter media. According to the impurities in the water can be used for single-layer filtration, double-layer filtration and multi-layer filtration.
Loading instructions
Multi-media filters (also known as mechanical filters) are made of layered anthracite, sand, finely divided garnet or other materials. The top layer of the multi-media filter is composed of the lightest and coarsest materials, and The heaviest and finest material is placed in the lower part of the bed. The principle is that first the larger particles in the water are removed on the top layer, and then the smaller particles are removed in the deeper part of the filter medium, which prevents the filter from clogging too quickly, and improves the filtering effect and the filtered water flux.
performance feature
Multi-media filter can remove large suspended particles in the water, thus reducing the SDI value of the water and meeting the requirements of deep purification. The equipment has the characteristics of low cost, low operation cost ,simple operation, filter material can be used for many times after backwashing, and the service life of the filter material is long.
applied range
Multi-media filter is widely used in water treatment process, mainly used in water treatment turbidity removal, water softening, electrodialysis, reverse osmosis of the pre-stage pretreatment, also can be used in surface water, groundwater sediment removal
design parameter
Design filtration rate: 8-12 m/h when the head loss is about 5 m, reverse washing regeneration is needed (generally, the pressure difference between inlet and outlet is 0.05mp by reading)
Backwash intensity: 10-15L / s • m2.
washing time: 5-7 minutes
Inlet water pressure: ≥ 0.4mpa backwash inlet water pressure: ≥ 0.20mpa
The inflation rate is 25-50%
Selection and parameters
