Welcome Customer !

Membership

XwbooInstrumentationTransmitterLevel TransmitterMultipoint Float Level Sensor Transmitter Gauge
  • $item.Title
  • $item.Title

Multipoint Float Level Sensor Transmitter Gauge

Shanghai Sensoriot Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Level Transmitter
Place of Origin
,
Ziasiot Multipoint Float Level Sensor Transmitter Gauge exploits magnetic float ball buoyancy principle in the liquid water; when level changes the magnetic float ball goes up and down along the conduit. Magnetic steel in the float ball attracts reed switch in the appropriate position of sensor to change the all-in resistance value of sensor,then transmitter will make the changed resistance signal into a 4-20 mA electric signal output. The transmitter power supply is 24 VDC, a two-wire working form, has stable, rel......

Description

The multipoint float level sensor transmitter gauge for liquid water – level switch is a liquid – level controller with safety, reliability, convenience for use and simple structure. One product can achieve multi – point control. It is characterized by long service life, fast speed and strong anti – load impact ability. The multipoint float level sensor transmitter gauge for liquid water – level switch is applicable to controlling the operation of pumps to maintain liquid levels, controlling the automatic loading and unloading of tanks, and controlling liquid levels or providing signals, such as in oil tanks, automatic cleaning systems, hydraulic tanks, low – pressure boilers and sewage treatment systems.

Features

• Multi – point control can be achieved. Top-mounted, side-mounted optional; connection types: NPT/PT/PF thread, DIN/ANSI/JIS flange, sanitary tri-clamp quick fitting; IP65 junction box protection grade, optional explosion-proof housing for flammable & explosive working site;

• Using a magnetic switch does not require a power supply, and the contact life can reach 2 million times.

• All switch output wires are in the same junction box. No regular calibration needed after installation, zero daily maintenance cost; single-cable junction box design cuts on-site wiring expense; cost-effective compared with radar/ultrasonic level meter for medium-short measuring range(≤6000mm).

• Compared with other forms of liquid – level switches with multiple switch control points, the unit price of the RF type is low.

• Optional wetted materials: SUS304(default)/SUS316L/PP/PTFE; Metal type withstand -1.0~3.5MPa, plastic type 0~0.5MPa; standard working temp -20~120℃, customized high temp up to 200℃; can be suitable for any acid – base solution, solvent, or various fuel oils.

• The magnetic switch and the wire are completely isolated from the liquid, so it can also be used on high – temperature and high – pressure equipment.

• Transmitter version: 2-wire 4~20mA DC superimposed digital signal; Switch version: SPST/SPDT dry contact (50W/250VAC max load), freely set Normally Open / Normally Closed per control point。

• The 60VA dry – contact reed switch can select normally – open or normally – closed through the installation position of the floating ball.

• The 316 SS floating ball, conduit, and installation interface are suitable for harsh environments.

• With a rotatable base seat convenient for electrical alignment adjustment (NEMA 4X) and a polypropylene outer casing.

• The length of the conduit and the size of the switch setting point can be customized.

float level sensor

Application

The multipoint float level sensor transmitter gauge for liquid water – level switch is widely used in industries such as wastewater/water treatment, shipbuilding,generator equipment, petrochemicals, food, electronics, dyeing and finishing, chemistry, rubber and plastics, hydraulic machinery, and chemical pharmaceuticals.

Product Types

Our Multipoint Float Level Sensor Transmitter Gauge combines the magnetic float buoyancy principle with reed resistance module design, splitting into two functional types:
  1. Continuous Float Level Transmitter: Output standard 4~20mA DC continuous signal for real-time continuous liquid level monitoring, remote central control and inventory statistics;
  2. 1~4 Points Float Level Switch: Dry contact on/off signal output, max 4 customized alarm/control points for pump auto start-stop, tank high/low level interlock protection。
Custom-made as standard service: Wetted part material, probe length, connection mode, control point position & NO/NC status all customizable, applicable for corrosive chemical liquid, high-temperature oil, sewage, drinking water and toxic medium storage tanks across petrochemical, water treatment, food & pharmaceutical industries.

Float Level Sensor Transmitter Gauge-2

Float Level Sensor Transmitter Gauge-2

Float Level Sensor Transmitter Gauge-3

Parameters

Parameter ItemSpecification
Measuring Range100mm ~ 6000mm; single-point switch stroke ≥100mm, continuous measuring stroke ≥500mm
Power SupplyTransmitter:12~36VDC(24VDC standard); Switch type: no external power required
Output SignalTransmitter:4~20mA two-wire; Switch: dry contact ON/OFF
Medium Density≥0.65g/cm³ (custom big float for low-density liquid<0.65g/cm³)
Medium Viscosity≤0.015Pa·S
Working PressureMetal rod: -1.0~3.5MPa; Plastic rod(PP):0~0.5MPa
Working TemperatureStandard:-20~120℃; Custom high temp: up to 200℃
Float Sizeφ25/28/45/50/75/110mm customizable
Guide Rod Diameter8/12/14/16/20mm
Max Control PointsSwitch version: up to 4 independent floating balls & 4 control points
Protection ClassIP65 (explosion-proof Ex optional)
Mounting StandardJB/T82.1-94 flange DN50/DN80/DN100 or custom thread

Full product category: Level Transmitter| Industry Transmitter

Float Level Sensor Transmitter Gauge-4

Float Level Sensor Transmitter Gauge-5

Float Level Sensor Transmitter Gauge-6

Float Level Sensor Transmitter Gauge-7

Float Level Sensor Transmitter Gauge-8

Float Level Sensor Transmitter Gauge-9

Float Level Sensor Transmitter Gauge-10

Float Level Sensor Transmitter Gauge Working Principle

Based on Archimedes’ buoyancy law + magnetic coupling reed resistance conversion principle, split into continuous transmitter & point switch two working logic:

1. Continuous Level Transmitter Working Principle

  1. A hollow annular-magnet float is sleeved on sealed non-magnetic guide tube; the float’s density is less than measured liquid, so it always floats on liquid surface and moves up/down synchronously with liquid level fluctuation;
  2. Inside sealed tube is arranged series-connected reed switch + precision fixed resistance divider module; when float’s built-in annular magnet passes by reed switch, magnetic force pulls reed contact to close, corresponding resistance is short-circuited, total loop resistance changes linearly with float position;
  3. The built-in signal converter collects resistance variation and converts into standard 4~20mA DC linear current signal, 4mA corresponds to empty tank (0% level), 20mA corresponds to full tank (99% level); signal can be remotely transmitted to PLC/DCS control room for real-time display, automatic regulation and data recording。

2. Float Level Switch Working Principle

Only retain independent reed switches preset at designated height inside guide tube (1~4 positions customizable). When liquid level rises/falls to trigger height, float magnet actuates corresponding reed switch to close/open, directly output dry contact switch signal to control relay, realizing pump startup/shutdown, overflow alarm, empty-cut protection without signal conversion。

Float Level Sensor Diagram

[Top Part]: Junction Box (Aluminum Alloy/PC/SS304, IP65) → Signal Outlet Cable↓[Sealed Non-magnetic Guide Rod Tube]: Inner: Series Reed Switch + Resistance Divider Module (Transmitter Type) / Independent Single-point Reed Switches (Switch Type)↓[Magnetic Float]: Hollow float with built-in annular permanent magnet (304/316L/PP/PVDF optional, floating on liquid surface)↓[Bottom End Cap + Mounting Interface]: Thread/Flange/Tri-clamp for tank installationJunction BoxMagnetic FloatMount Port
Flange/ThreadLiquid Level Sensor Transmitter Dynamic Diagram

Float Level Sensor - Dynamic Structure Diagram
Junction Box
Mount / Flange
Reed Switch
Reed Switch
Reed Switch
Magnetic Float
Liquid Level
Dynamic display: liquid level & float movement

Float Level Sensor Tranmsitter Gauge Application

Float Level Sensor for Water Level Controller

Float Level Sensor for Water Level Controller

Background: For A city-level sewage treatment plant’s regulating tank, sedimentation tank and clean water storage pool need automatic water level control: low water level auto-start inlet pump, high water level auto-stop feed pump + overflow alarm, avoid tank overflow and pump dry-running damage.

Solution: Install 4-point float level switch on top of each water tank (304SS material, length customized 1800mm): set ①low level(20%) → pump startup; ②warning low(35%); ③warning high(80%); ④overflow cutoff(95%) four control points;Circulating pure water tank adopts continuous float level transmitter, output 4~20mA signal connected to central PLC for real-time water level remote monitoring.

Effect: Realize full automatic unattended water level control, reduce 90% manual inspection work; eliminate overflow loss and pump idle burnout fault, annual maintenance cost reduced by over 60%.

Fault Troubleshooting

Fault PhenomenonRoot CauseTroubleshooting
Float stuck & unable to moveForeign matter winding float; float specific gravity greater than measured liquid density; float internal leakageClear sundries; replace customized low-density float; change new float
Float moves but no signal outputReed switch damaged; float magnet offsetReplace reed switch; adjust float fixed ring position
Abnormal random signal outputNearby strong magnetic field interferenceRemove surrounding magnetic component or change installation position
Signal locked without resetFloat stuck by impuritiesDismount probe and clean foreign blocking matter

Ordering Guide

When placing customization order, confirm below parameters:
  1. Working medium name, density, temperature & corrosivity → confirm float/rod material(304/316L/PP/PTFE);
  2. Total measuring length of probe; mounting mode(Top/Side); connection specification(Thread/Flange/Tri-clamp);
  3. Product type: Continuous Transmitter(4~20mA) or Point Switch(1~4 points, confirm each point height & NO/NC);
  4. Working pressure, whether need explosion-proof / IP higher protection grade;
  5. Junction box type (Standard/Explosion-proof/Hirschmann plug type)。

Float Level Sensor Transmitter Gauge-11

Request A Quote

Shanghai Sensoriot Technology Co., Ltd. is an experienced manufacture of pressure and temperature sensors, transmitters; Melt pressure transmitters, melt temperature sensors, Internet of Things, laboratory instruments and automation with variety of brands such as Zias, Holeader, EMPS, Wu Hao MC, etc, which could be used in different industrial fields and process control.The main products developed and produced by our company consist of multiple series, including wireless sensors, flow sensors, linears, pressure sensors, liquid level sensors, high temperature melt pressure sensors , melt pressure gauge, high temperature melt pressure transmitter, temperature sensor, fusion index instrument, pressure calibration system, smart digital instrument, blasting switch, smart home system, smart module, smart body scale, laboratory instrument, Internet of Things, and Automated complete control system. We strive to innovate, advocate environmental protection, adhere to the concept of high quality and integrity, and are committed to developing into a technology manufacturing group enterprise of sensor Internet of things and automated control systems.
Similar Product Recommend