Membership
Help
Zhangjiagang Navan Industrial Co., Ltd.
Zhangjiagang Navan Industrial Co., Ltd.
NAVAN New Design Full Auto Caps Injection Molding Machine
It is the main molding equipment for making thermoplastic or thermosetting materials into various shapes of plastic products using plastic molding molds.
An injection molding machine is usually composed of an injection system, a clamping system, a hydraulic transmission system, an electrical control system, a lubrication system, a heating and cooling system, and a safety monitoring system.




4.PLC Contorl System.

5.Cap Injection mould

NAVAN New Design Full Auto Caps Injection Molding Machine
It is the main molding equipment for making thermoplastic or thermosetting materials into various shapes of plastic products using plastic molding molds.
An injection molding machine is usually composed of an injection system, a clamping system, a hydraulic transmission system, an electrical control system, a lubrication system, a heating and cooling system, and a safety monitoring system.




4.PLC Contorl System.

5.Cap Injection mould

| MACHINE MODEL | Unit | YJL100 | YJL130 | YJL160 | YJL200 | YJL230 | YJL 260 | ||||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 36 | 40 | 42 | 40 | 42 | 45 | 41 | 43 | 45 | 45 | 48 | 52 | 48 | 52 | 55 | 52 | 55 | 60 |
| Screw Diameter Ratio | L/D | 24.3 | 21.9 | 20.3 | 21.7 | 20.7 | 19.3 | 21.3 | 20.3 | 19.4 | 24.8 | 23.3 | 21.5 | 21.1 | 19.5 | 18.4 | 23.1 | 21.8 | 20 |
| Theoretical Shot Volume | cm3 | 162 | 201 | 221 | 232 | 256 | 294 | 277 | 304 | 333 | 373 | 425 | 498 | 452 | 530 | 593 | 573 | 641 | 763 |
| Injection Weight(PS) | g | 148 | 182 | 201 | 211 | 233 | 267 | 252 | 277 | 303 | 340 | 387 | 453 | 411 | 482 | 540 | 521 | 583 | 694 |
Injection Rate (PS) | g/s | 78 | 97 | 107 | 97 | 107 | 123 | 118 | 130 | 142 | 142 | 162 | 190 | 146 | 172 | 192 | 186 | 210 | 238 |
| Injection Pressure | Mpa | 222 | 180 | 163 | 180 | 163 | 142 | 182 | 166 | 151 | 188 | 165 | 140 | 182 | 155 | 138 | 189 | 169 | 142 |
| Plasticizing Capacity(PS) | g/s | 13 | 15 | 16 | 15 | 16 | 19 | 16 | 18 | 21 | 20 | 22.3 | 24 | 24 | 27 | 30 | 27 | 29 | 31 |
| Screw Speed | rpm | 185 | 185 | 230 | 215 | 180 | 170 | ||||||||||||
| Clamping Unit | |||||||||||||||||||
| Clamping Force | KN | 1000 | 1300 | 1600 | 2000 | 2300 | 2600 | ||||||||||||
| Togglestroke | mm | 340 | 380 | 420 | 436 | 500 | 560 | ||||||||||||
| Space Between Tie-bars | mm*mm | 360*360 | 410*410 | 440*440 | 460*460 | 520*520 | 580*580 | ||||||||||||
| Min-max Mould Thickness | mm | 150-350 | 150-430 | 180-450 | 180-500 | 200-530 | 220-580 | ||||||||||||
| Ejection Stroke | mm | 105 | 120 | 130 | 140 | 140 | 140 | ||||||||||||
| Ejecting Force | KN | 38 | 38 | 45 | 70 | 70 | 70 | ||||||||||||
| Ejector Number | PC | 5 | 5 | 5 | 5 | 5 | 5 | ||||||||||||
| Other | |||||||||||||||||||
| Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | 16 | ||||||||||||
| Oil Pump Motor Power | KW | 13(10.5) | 13(10.5) | 15(15.7) | 18.5(20.5) | 18.5(20.5) | 22(26.7) | ||||||||||||
| Heater Power | KW | 8.8 | 10.6 | 10.55 | 16.5 | 14.5 | 18.6 | ||||||||||||
| Oil Tank Capacity | Kg | 200 | 200 | 250 | 300 | 300 | 400 | ||||||||||||
| Overall Dimension(About) | mm | 4360*1100*1885 | 4600*1150*1885 | 4850*1250*1960 | 5200*1457*2036 | 5540*1480*2160 | 5950*1550*2160 | ||||||||||||
| Machine Weight(About) | t | 3.4 | 3.8 | 4.7 | 5.7 | 6.8 | 7.8 | ||||||||||||

300~550 Tons Injection Molding Machine
| MACHINE MODEL | Unit | YJL300 | YJL360 | YJL400 | YJL480 | YJL550 | ||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 60 | 65 | 70 | 65 | 70 | 72 | 70 | 75 | 80 | 75 | 80 | 85 | 80 | 85 | 90 |
Screw Diameter Ratio | L/D | 25.2 | 23.3 | 21.6 | 23.3 | 21.6 | 21 | 21.4 | 20 | 18.8 | 23.5 | 22 | 20.7 | 23.4 | 22 | 20.8 |
Theoretical Shot Volume | cm3 | 847 | 995 | 1154 | 1127 | 1307 | 1383 | 1423 | 1634 | 1859 | 1876 | 2135 | 2410 | 2210 | 2495 | 2797 |
Injection Weight (PS) | g | 771 | 905 | 1050 | 1026 | 1190 | 1259 | 1295 | 1487 | 1692 | 1707 | 1943 | 2193 | 2011 | 2270 | 2545 |
Injection Rate (PS) | g/s | 238 | 279 | 324 | 260 | 301 | 319 | 323 | 371 | 422 | 391 | 445 | 502 | 416 | 470 | 527 |
| Injection Pressure | Mpa | 198 | 169 | 145 | 181 | 156 | 148 | 182 | 158 | 139 | 179 | 158 | 140 | 184 | 163 | 145 |
Plasticizing Capacity (PS) | g/s | 31 | 35.3 | 39.8 | 35.3 | 39.8 | 45 | 45 | 51 | 59 | 51 | 54 | 58 | 56 | 62 | 68 |
| Screw Speed | rpm | 140 | 140 | 150 | 120 | 120 | ||||||||||
| Clamping Unit | ||||||||||||||||
| Clamping Force | KN | 3000 | 3600 | 4000 | 4800 | 5500 | ||||||||||
| Togglestroke | mm | 610 | 660 | 730 | 770 | 840 | ||||||||||
Space Between Tie-bars | mm*mm | 630*630 | 680*680 | 720*720 | 780*780 | 830*830 | ||||||||||
Min-max Mould Thickness | mm | 250-630 | 280-680 | 280-750 | 320-780 | 350-850 | ||||||||||
| Ejection Stroke | mm | 160 | 180 | 180 | 200 | 220 | ||||||||||
| Ejecting Force | KN | 90 | 110 | 110 | 110 | 150 | ||||||||||
| Ejector Number | PC | 13 | 13 | 13 | 13 | 13 | ||||||||||
| Others | ||||||||||||||||
Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | ||||||||||
Oil Pump Motor Power | KW | 30(35.6) | 30(35.6) | 37(48.2) | 45(26.7+24.1) | 55(26.7+26.7) | ||||||||||
| Heater Power | KW | 27.2 | 29 | 25.6 | 37 | 41 | ||||||||||
| Oil Tank Capacity | Kg | 520 | 520 | 600 | 800 | 900 | ||||||||||
Overall Dimension (About) | mm | 6590*1665*2100 | 7200*1860*2350 | 7600*1860*2360 | 8500*1865*2505 | 9300*2070*2500 | ||||||||||
Machine Weight (About) | t | 11 | 13 | 15 | 18 | 22 | ||||||||||
680~1600 Tons Injection Molding Machine
| MACHINE MODEL | Unit | YJL680 | YJL850 | YJW11000 | YJT13000 | YJW16000 | ||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 90 | 95 | 100 | 100 | 110 | 120 | 110 | 120 | 130 | 110 | 120 | 130 | 130 | 140 | 150 |
Screw Diameter Ratio | L/D | 23.6 | 22.4 | 21.3 | 24.4 | 22.2 | 20.3 | 24 | 22 | 20.3 | 23.8 | 22 | 20.2 | 23.7 | 22 | 20.5 |
Theoretical Shot Volume | cm3 | 2924 | 3258 | 3611 | 4003 | 4844 | 5765 | 4000 | 5600 | 6320 | 4600 | 6300 | 7800 | 8000 | 9500 | 11000 |
| Injection Weight(PS) | g | 2661 | 2965 | 3286 | 3643 | 4408 | 5246 | 3780 | 5292 | 5972 | 4200 | 5755 | 7130 | 7560 | 8978 | 10395 |
| Injection Rate(PS) | g/s | 498 | 555 | 614 | 549 | 663 | 790 | 760 | 904 | 974 | 803 | 951 | 1048 | 1107 | 1284 | 1474 |
| Injection Pressure | Mpa | 180 | 162 | 146 | 201 | 166 | 140 | 169 | 142 | 132 | 204 | 172 | 146 | 174 | 150 | 131 |
Plasticizing Capacity (PS) | g/s | 74 | 78 | 84 | 86 | 102 | 108 | 98.3 | 122.3 | 149.8 | 101.5 | 124 | 140 | 149.8 | 173.8 | 199 |
| Screw Speed | rpm | 120 | 84 | 80 | 100 | 80 | ||||||||||
| Clamping Unit | ||||||||||||||||
| Clamping Force | KN | 6800 | 8500 | 11000 | 13000 | 16000 | ||||||||||
| "Ibgglestroke | mm | 920 | 1020 | 1220 | 1360 | 1530 | ||||||||||
Space Between Tie-bars | mm*mm | 920*920 | 1030*1030 | 1160*1160 | 1300*1300 | 1500*1500 | ||||||||||
Min-max Mould Thickness | mm | 400-920 | 450-1030 | 520-1250 | 550-1360 | 650-1450 | ||||||||||
| Ejection Stroke | mm | 280 | 300 | 330 | 360 | 405 | ||||||||||
| Ejecting Force | KN | 180 | 210 | 280 | 280 | 400 | ||||||||||
| Ejector Number | PC | 17 | 21 | 21 | 21 | 29 | ||||||||||
| Other | ||||||||||||||||
Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | ||||||||||
| Oil Pump Motor Power | KW | 30+3 0(35.6+31.4) | 30+45(48.2+35.6) | 45+4 5(31+31+31) | 65+6 5(31+44+44) | 45+45+4 5(48.2+48.2+48.2) | ||||||||||
| Heater Power | KW | 51 | 70.2 | 65.7 | 65.7 | 96.1 | ||||||||||
| Oil Tank Capacity | Kg | 820 | 1135 | |||||||||||||
Overall Dimension (About) | m | 10.2*2.3*2.53 | 11.7*2.54*2.7」 | 13.11*2.73*4.24 | 13.55*2.88*4.13 | 15.99*3.3*4.56 | ||||||||||
Machine Weight (About) | t | 28 | 37 | 61.5 | 78 | 102 | ||||||||||
| MACHINE MODEL | Unit | YJL100 | YJL130 | YJL160 | YJL200 | YJL230 | YJL 260 | ||||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 36 | 40 | 42 | 40 | 42 | 45 | 41 | 43 | 45 | 45 | 48 | 52 | 48 | 52 | 55 | 52 | 55 | 60 |
| Screw Diameter Ratio | L/D | 24.3 | 21.9 | 20.3 | 21.7 | 20.7 | 19.3 | 21.3 | 20.3 | 19.4 | 24.8 | 23.3 | 21.5 | 21.1 | 19.5 | 18.4 | 23.1 | 21.8 | 20 |
| Theoretical Shot Volume | cm3 | 162 | 201 | 221 | 232 | 256 | 294 | 277 | 304 | 333 | 373 | 425 | 498 | 452 | 530 | 593 | 573 | 641 | 763 |
| Injection Weight(PS) | g | 148 | 182 | 201 | 211 | 233 | 267 | 252 | 277 | 303 | 340 | 387 | 453 | 411 | 482 | 540 | 521 | 583 | 694 |
Injection Rate (PS) | g/s | 78 | 97 | 107 | 97 | 107 | 123 | 118 | 130 | 142 | 142 | 162 | 190 | 146 | 172 | 192 | 186 | 210 | 238 |
| Injection Pressure | Mpa | 222 | 180 | 163 | 180 | 163 | 142 | 182 | 166 | 151 | 188 | 165 | 140 | 182 | 155 | 138 | 189 | 169 | 142 |
| Plasticizing Capacity(PS) | g/s | 13 | 15 | 16 | 15 | 16 | 19 | 16 | 18 | 21 | 20 | 22.3 | 24 | 24 | 27 | 30 | 27 | 29 | 31 |
| Screw Speed | rpm | 185 | 185 | 230 | 215 | 180 | 170 | ||||||||||||
| Clamping Unit | |||||||||||||||||||
| Clamping Force | KN | 1000 | 1300 | 1600 | 2000 | 2300 | 2600 | ||||||||||||
| Togglestroke | mm | 340 | 380 | 420 | 436 | 500 | 560 | ||||||||||||
| Space Between Tie-bars | mm*mm | 360*360 | 410*410 | 440*440 | 460*460 | 520*520 | 580*580 | ||||||||||||
| Min-max Mould Thickness | mm | 150-350 | 150-430 | 180-450 | 180-500 | 200-530 | 220-580 | ||||||||||||
| Ejection Stroke | mm | 105 | 120 | 130 | 140 | 140 | 140 | ||||||||||||
| Ejecting Force | KN | 38 | 38 | 45 | 70 | 70 | 70 | ||||||||||||
| Ejector Number | PC | 5 | 5 | 5 | 5 | 5 | 5 | ||||||||||||
| Other | |||||||||||||||||||
| Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | 16 | ||||||||||||
| Oil Pump Motor Power | KW | 13(10.5) | 13(10.5) | 15(15.7) | 18.5(20.5) | 18.5(20.5) | 22(26.7) | ||||||||||||
| Heater Power | KW | 8.8 | 10.6 | 10.55 | 16.5 | 14.5 | 18.6 | ||||||||||||
| Oil Tank Capacity | Kg | 200 | 200 | 250 | 300 | 300 | 400 | ||||||||||||
| Overall Dimension(About) | mm | 4360*1100*1885 | 4600*1150*1885 | 4850*1250*1960 | 5200*1457*2036 | 5540*1480*2160 | 5950*1550*2160 | ||||||||||||
| Machine Weight(About) | t | 3.4 | 3.8 | 4.7 | 5.7 | 6.8 | 7.8 | ||||||||||||

300~550 Tons Injection Molding Machine
| MACHINE MODEL | Unit | YJL300 | YJL360 | YJL400 | YJL480 | YJL550 | ||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 60 | 65 | 70 | 65 | 70 | 72 | 70 | 75 | 80 | 75 | 80 | 85 | 80 | 85 | 90 |
Screw Diameter Ratio | L/D | 25.2 | 23.3 | 21.6 | 23.3 | 21.6 | 21 | 21.4 | 20 | 18.8 | 23.5 | 22 | 20.7 | 23.4 | 22 | 20.8 |
Theoretical Shot Volume | cm3 | 847 | 995 | 1154 | 1127 | 1307 | 1383 | 1423 | 1634 | 1859 | 1876 | 2135 | 2410 | 2210 | 2495 | 2797 |
Injection Weight (PS) | g | 771 | 905 | 1050 | 1026 | 1190 | 1259 | 1295 | 1487 | 1692 | 1707 | 1943 | 2193 | 2011 | 2270 | 2545 |
Injection Rate (PS) | g/s | 238 | 279 | 324 | 260 | 301 | 319 | 323 | 371 | 422 | 391 | 445 | 502 | 416 | 470 | 527 |
| Injection Pressure | Mpa | 198 | 169 | 145 | 181 | 156 | 148 | 182 | 158 | 139 | 179 | 158 | 140 | 184 | 163 | 145 |
Plasticizing Capacity (PS) | g/s | 31 | 35.3 | 39.8 | 35.3 | 39.8 | 45 | 45 | 51 | 59 | 51 | 54 | 58 | 56 | 62 | 68 |
| Screw Speed | rpm | 140 | 140 | 150 | 120 | 120 | ||||||||||
| Clamping Unit | ||||||||||||||||
| Clamping Force | KN | 3000 | 3600 | 4000 | 4800 | 5500 | ||||||||||
| Togglestroke | mm | 610 | 660 | 730 | 770 | 840 | ||||||||||
Space Between Tie-bars | mm*mm | 630*630 | 680*680 | 720*720 | 780*780 | 830*830 | ||||||||||
Min-max Mould Thickness | mm | 250-630 | 280-680 | 280-750 | 320-780 | 350-850 | ||||||||||
| Ejection Stroke | mm | 160 | 180 | 180 | 200 | 220 | ||||||||||
| Ejecting Force | KN | 90 | 110 | 110 | 110 | 150 | ||||||||||
| Ejector Number | PC | 13 | 13 | 13 | 13 | 13 | ||||||||||
| Others | ||||||||||||||||
Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | ||||||||||
Oil Pump Motor Power | KW | 30(35.6) | 30(35.6) | 37(48.2) | 45(26.7+24.1) | 55(26.7+26.7) | ||||||||||
| Heater Power | KW | 27.2 | 29 | 25.6 | 37 | 41 | ||||||||||
| Oil Tank Capacity | Kg | 520 | 520 | 600 | 800 | 900 | ||||||||||
Overall Dimension (About) | mm | 6590*1665*2100 | 7200*1860*2350 | 7600*1860*2360 | 8500*1865*2505 | 9300*2070*2500 | ||||||||||
Machine Weight (About) | t | 11 | 13 | 15 | 18 | 22 | ||||||||||
680~1600 Tons Injection Molding Machine
| MACHINE MODEL | Unit | YJL680 | YJL850 | YJW11000 | YJT13000 | YJW16000 | ||||||||||
| Injection Device | I | II | III | I | II | III | I | II | III | I | II | III | I | II | III | |
| Screw Diameter | mm | 90 | 95 | 100 | 100 | 110 | 120 | 110 | 120 | 130 | 110 | 120 | 130 | 130 | 140 | 150 |
Screw Diameter Ratio | L/D | 23.6 | 22.4 | 21.3 | 24.4 | 22.2 | 20.3 | 24 | 22 | 20.3 | 23.8 | 22 | 20.2 | 23.7 | 22 | 20.5 |
Theoretical Shot Volume | cm3 | 2924 | 3258 | 3611 | 4003 | 4844 | 5765 | 4000 | 5600 | 6320 | 4600 | 6300 | 7800 | 8000 | 9500 | 11000 |
| Injection Weight(PS) | g | 2661 | 2965 | 3286 | 3643 | 4408 | 5246 | 3780 | 5292 | 5972 | 4200 | 5755 | 7130 | 7560 | 8978 | 10395 |
| Injection Rate(PS) | g/s | 498 | 555 | 614 | 549 | 663 | 790 | 760 | 904 | 974 | 803 | 951 | 1048 | 1107 | 1284 | 1474 |
| Injection Pressure | Mpa | 180 | 162 | 146 | 201 | 166 | 140 | 169 | 142 | 132 | 204 | 172 | 146 | 174 | 150 | 131 |
Plasticizing Capacity (PS) | g/s | 74 | 78 | 84 | 86 | 102 | 108 | 98.3 | 122.3 | 149.8 | 101.5 | 124 | 140 | 149.8 | 173.8 | 199 |
| Screw Speed | rpm | 120 | 84 | 80 | 100 | 80 | ||||||||||
| Clamping Unit | ||||||||||||||||
| Clamping Force | KN | 6800 | 8500 | 11000 | 13000 | 16000 | ||||||||||
| "Ibgglestroke | mm | 920 | 1020 | 1220 | 1360 | 1530 | ||||||||||
Space Between Tie-bars | mm*mm | 920*920 | 1030*1030 | 1160*1160 | 1300*1300 | 1500*1500 | ||||||||||
Min-max Mould Thickness | mm | 400-920 | 450-1030 | 520-1250 | 550-1360 | 650-1450 | ||||||||||
| Ejection Stroke | mm | 280 | 300 | 330 | 360 | 405 | ||||||||||
| Ejecting Force | KN | 180 | 210 | 280 | 280 | 400 | ||||||||||
| Ejector Number | PC | 17 | 21 | 21 | 21 | 29 | ||||||||||
| Other | ||||||||||||||||
Maximum System Pressure | Mpa | 16 | 16 | 16 | 16 | 16 | ||||||||||
| Oil Pump Motor Power | KW | 30+3 0(35.6+31.4) | 30+45(48.2+35.6) | 45+4 5(31+31+31) | 65+6 5(31+44+44) | 45+45+4 5(48.2+48.2+48.2) | ||||||||||
| Heater Power | KW | 51 | 70.2 | 65.7 | 65.7 | 96.1 | ||||||||||
| Oil Tank Capacity | Kg | 820 | 1135 | |||||||||||||
Overall Dimension (About) | m | 10.2*2.3*2.53 | 11.7*2.54*2.7」 | 13.11*2.73*4.24 | 13.55*2.88*4.13 | 15.99*3.3*4.56 | ||||||||||
Machine Weight (About) | t | 28 | 37 | 61.5 | 78 | 102 | ||||||||||