Membership
Help
I. CH Motion Co., Ltd.
I. CH Motion Co., Ltd.
Although the NEMA 23 stepper motor is an equipment that can be controlled accurately, it is an open-loop service, so an encoder should be installed to realize closed-loop feedback control. The NEMA 23 closed-loop stepper motor is an assembly of stepper motor with encoder.
Commonly, the encoder is installed on the double shaft motor back. In principle, it is possible to install a motor on one end of the lead screw and an encoder on the other. But it may be affected by the accuracy of the stepper motor. The misjudgment of the losing step occurs.
If you have any interest, please contact us.
| Electrical Specification | ||||||||
| Series Model | Rated Voltage(V) | L (mm) | Phase Current (A) | Phase Resistance (Omh) | Phase Inductance (mH) | Holding Torque (N.cm) | Moment of Inertia (g.cm2) | Motor Weight ( g) |
| HS561-11030A | 2.4 | 56 | 3.0 | 0.8 | 2.4 | 110 | 200 | 980 |
| HS561-11042A | 1.68 | 56 | 4.2 | 0.4 | 1.2 | 110 | 200 | 980 |
| HS561-22030A | 3.6 | 80 | 3.0 | 1.2 | 4.0 | 220 | 480 | 1400 |
| HS561-22042A | 2.94 | 80 | 4.2 | 0.7 | 2.0 | 220 | 480 | 1400 |
| HS561-25030A | 4.2 | 100 | 3.0 | 1.4 | 5.5 | 250 | 800 | 1550 |
| HS561-28042A | 2.94 | 100 | 4.2 | 0.7 | 2.5 | 280 | 800 | 1550 |
Matched Driver
• SS5 Stepper Servo Motor Driver.pdf
Find More Stepper Servo DriverAlthough the NEMA 23 stepper motor is an equipment that can be controlled accurately, it is an open-loop service, so an encoder should be installed to realize closed-loop feedback control. The NEMA 23 closed-loop stepper motor is an assembly of stepper motor with encoder.
Commonly, the encoder is installed on the double shaft motor back. In principle, it is possible to install a motor on one end of the lead screw and an encoder on the other. But it may be affected by the accuracy of the stepper motor. The misjudgment of the losing step occurs.
If you have any interest, please contact us.
| Electrical Specification | ||||||||
| Series Model | Rated Voltage(V) | L (mm) | Phase Current (A) | Phase Resistance (Omh) | Phase Inductance (mH) | Holding Torque (N.cm) | Moment of Inertia (g.cm2) | Motor Weight ( g) |
| HS561-11030A | 2.4 | 56 | 3.0 | 0.8 | 2.4 | 110 | 200 | 980 |
| HS561-11042A | 1.68 | 56 | 4.2 | 0.4 | 1.2 | 110 | 200 | 980 |
| HS561-22030A | 3.6 | 80 | 3.0 | 1.2 | 4.0 | 220 | 480 | 1400 |
| HS561-22042A | 2.94 | 80 | 4.2 | 0.7 | 2.0 | 220 | 480 | 1400 |
| HS561-25030A | 4.2 | 100 | 3.0 | 1.4 | 5.5 | 250 | 800 | 1550 |
| HS561-28042A | 2.94 | 100 | 4.2 | 0.7 | 2.5 | 280 | 800 | 1550 |
Matched Driver
• SS5 Stepper Servo Motor Driver.pdf
Find More Stepper Servo Driver