Membership
Help
Ningbo Hyconnect Communication Technology Co., Ltd.
Ningbo Hyconnect Communication Technology Co., Ltd.
P/N: HT-568
Application
●Cutting modular cable: place the single-bladed side of the tool's cutter facing you and cut the modular cable to the desired length. Make sure to cut the ends of hte cord straight across, not diagonally
●Insert 4P/6P cable into the two-bladed side of the tool's stripper until it touches the stop guide; Insert 8P/1 OP cable into the two-bladed side of the tool's stripper and let it extend a little past hte lower cut blade.
●Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool
●Remove teh outer jack, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end
●Place modular plug with cable into the tool's holder. Be sure the stripped wire is between the tab and gold contacts.
●Remove the crimped plug from the tool