Welcome Customer !

Membership

XwbooPaper machineryPapermaking Auxiliary EquipmentDryerNickel residue mill
  • $item.Title
  • $item.Title

Nickel residue mill

Shanghai Tongli Heavy Machinery Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Dryer
Place of Origin
,
[Maximum feed]: 30[maximum output of single machine]: 150[Motor power]: 5000[Scope of application]: Comprehensive utilization of nickel slag[Applicable materials]: Smelting nickel slag

Product introduction

ZJTL-S Nickel slag vertical mill output can reach 200t/h the system power consumption is below 36kWh/t the finished product fineness can reach 480-500m2/kg and it can meet the annual production capacity of 2-3 million tons nickel slag production line project. It sets grindingdryingclassifying in one with high grinding efficiency drying ability and other characteristics. It implements the process simplified less covering area saving investment greatly reduce powder consumption and long services life and high rates of operation of superfine grinding technology innovation processand get many national patents.

Structure principle

The material feeding pipe falls to the center of the grinding disc and the disc rotating at a constant speed uses the effect of centrifugal force to uniformly disperse and flatten the raw material outward to form a certain thickness of the material bed and the material is simultaneously subjected to grinding by multiple grinding rollers on the grinding disc. Pressed and crushed. The material continuously moves towards the outer edge of the disc under the continuous driving of the centrifugal force. When the material leaving the disc encounters the hot gas that enters the mill through the air ring and rises it enters into the separator through the middle shell of the mill. The medium material is fully heat-exchanged with the hot gas and the water is quickly evaporated.

Technical advantage

1. The system power consumption does not exceed 43 kWh/t and the power saving effect is significant;

According to customer feedback data the power consumption of the nickel slag vertical mill system does not exceed 43 kWh/t which is 30% to 40% lower than conventional ball mills which reduces the company's production costs.

2. The specific surface area of nickel slag powder can reach 4200-4500 cm2/g and the quality of the product is stable;

The residence time of the material in the body is short it is easy to detect and control the particle size and chemical composition of the commodity and the repetitive grinding is reduced. The specific surface area of the ground nickel powder can reach 4200-4500 cm2/g and the product quality is stable.

3 the structure is simple small footprint cut out the capital of the money;

4. Nickel slag production line can recover capital in 1~2 years with a high return on investment;

The extensive application of nickel slag powder has gradually increased the market demand for nickel slag powder and the nickel slag powder production line has become the new darling of investment stores in these years. The nickel slag micro-powder store has good performance and high return on investment.

Latest case

Zhejiang *** Building Materials Co. Ltd. successfully put into operation equipment operation is stable reaching the standard production.

Production status

Day operation】: 24 hours

【Feed】: Nickel slag

【Product】: Specific surface area ≥ 425m2/kg

【Production】: 60-75 tons / hour

Technical parameter

Specificationsyield (t/h)specific surface area C㎡/gGrinding waterpower (kw)
ZJTL3030S354200~4500<15%1250
ZJTL3630S501800
ZJTL4240S652240
ZJTL4640S903150
ZJTL5040S1204200
ZJTL5640S1505000
The company's production base covers an area of ??153,800 square meters, of which the workshop construction area is 85,000 square meters and the maximum lifting capacity of a single vehicle is 200 tons. The company has φ5.3 × 18m (bearing 200t) CNC horizontal lathe, φ5.5 × 18m barrel lathe, φ8m heavy digital vertical lathe, φ8.0m heavy duty hobbing machine, 14 × 5m CNC floor boring and milling machine 3.4 × 10m CNC Longmen boring and milling machines, 120mm CNC rolling machines, φ6.5×20m large annealing furnaces, φ6.5×20m sand blasting rooms, 1800t four-column hydraulic presses, 10t electric arc furnaces and other heavy machinery manufacturing equipment more than 100 sets (sets), is a comprehensive machinery One of the most processing companies.After more than 50 years of continuous development, the company already has a group of experienced technical experts and high-quality management personnel, a first-class science and technology research and development center and engineering service team. At the same time, the company has its own intellectual property rights in the slag vertical mill, raw vertical mill, cement vertical mill, coal vertical mill and rotary kiln, cement mill, wind sweep coal mill, dryer and other cement machinery series host equipment; The company also produces equipment and large structural parts such as compound fertilizers, mining, power generation, and sludge (waste) incineration systems. The products are exported to Germany, Russia, Brazil, Egypt, Iran, Bangladesh, Pakistan, Turkey, Myanmar, Vietnam, Colombia, Bolivia. , South Africa and more than 60 countries and regions, nearly 1,000 users worldwide.
Similar Product Recommend