Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterNon-full pipe electromagnetic flowmeter
  • $item.Title
  • $item.Title

Non-full pipe electromagnetic flowmeter

Kaifeng Henghe Flow Meter Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Flowmeter
Place of Origin
HeNan, KaiFeng

Kaifeng Henghe Flow Meter Co., Ltd.

Contact

Manager Bian

Phone

13523785668

Fax

86-371-25616199
InstallationrequirementsanduseoftheinstrumentAsanewtypeofflowmeter,thenon-fulltubeflowmeterhasanirreplaceableadvantage.Fromtheappearancepointofview,thenon

Installation requirements and use of the instrument

As a new type of flow meter, the non-full tube flow meter has an irreplaceable advantage.

From the appearance point of view, the non-full tube flowmeter is no different from the ordinary electromagnetic flowmeter. It also has the advantages of not being affected by fluid parameters, no moving parts, no obstructions, very small pressure loss, no measurement hysteresis, linear output and Advantages such as wide range.

The measuring channel of the non-full-pipe flowmeter is a smooth straight pipe, which will not be blocked, so it is especially suitable for measuring liquid-solid two-phase fluids containing solid particles, such as pulp, mud, sewage, etc. The installation of a non-full pipe flow meter will not raise the water level upstream, so it will not cause head loss.

The choice of installation location of flow meter and level meter

①The installation location of the flow meter and the level meter should be chosen as far as possible in the channel or river course with relatively straight sections, try to avoid gates, bends, water inlets and outlets, up and down ramps, and straight canal sections must have a certain length. The length of the upstream and downstream of the straight channel section is greater than 10 times the channel width, so that the flow distribution of the measurement section will be relatively stable and uniform, and the measurement data will be more accurate.

②The flow rate sensor is installed on the side wall of the channel (if there is no problem of sedimentation, it can also be installed at the bottom of the channel), and the direction indicator points to the downstream of the water flow to ensure that the flow rate sensor is parallel to the water flow axis. The installation point of the level gauge should be as close as possible to the installation position of the flow sensor, and the installation of the level gauge should be perpendicular to the water surface. The water level measurement process is the same as the internal water level measurement process of the indicator).

The wiring of non-full pipe electromagnetic flowmeter

All connecting wires of non-full-tube flowmeters should be as short as possible, avoid the power cables as much as possible, and make the connection wires waterproof, moisture-proof, break-proof, and shielded to ensure that the wiring is correct.

Maintenance precautions

1. Always keep the flow meter and level meter installation channels clean to prevent the influence of weeds and other floating objects.

2. Keep the display device dry and ventilated, and normal power supply.

3. On-site equipment to prevent man-made damage.

  Kaifeng Henghe Flow Meter Co., Ltd. is an emerging enterprise specializing in industrial process automation control and the research, development, production and service of intelligent meters. The company is located in Kaifeng, an ancient capital of the Eight Dynasties. Kaifeng Instrument Industry was founded in 1958. The National Water Flow Metering Station and the Flow Meter Product Quality Inspection Center of the Ministry of Machinery Industry are located here. There are a large number of senior flow meter production and R&D engineering and technical personnel. The company has strong technical force and has passed ISO90001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, and various flowmeter production licenses. The main products are: electromagnetic flowmeter series (high pressure type, submersible type, sanitary type, plug-in type, etc.), vortex flowmeter series, turbine, differential pressure flowmeter series (standard orifice, standard nozzle, V cone, wedge, etc.) Annular orifice plate, balance orifice plate, venturi tube) and large, medium and small liquid flow calibration device. The company has built four sets of water flow standard devices DN15-DN50, DN65-DN300, DN350-DN700, and DN800-DN2000. The accuracy of the standard meters on the devices are all 0.2 level. The company’s product specifications are complete and can meet liquid, gas, steam, etc. For flow measurement of multiple media, each flowmeter is qualified for the actual flow calibration before leaving the factory. The factory has an automatic control system engineering department, which undertakes complete sets of automatic control projects. Products are widely used in nuclear power, chemical, electric power, petroleum, petrochemical, coal, sewage treatment, animal husbandry, urban water supply, agricultural irrigation, heating, metallurgical coking, machinery, papermaking, medicine, food processing and other industries. And exported to most countries. Based on the tenet of "Today's Quality, Tomorrow's Market", we attach importance to product quality and provide users with high-quality commissioning guidance, technical training, product maintenance, re-schooling and spare parts supply in a timely manner. Kaifeng Yokogawa Instruments is willing to make progress hand in hand with the majority of users in flow meters to create brilliance together.
Similar Product Recommend