Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterNozzle flowmeter
  • $item.Title
  • $item.Title

Nozzle flowmeter

iangsu Zhongwei Measurement and Control Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Flowmeter
Place of Origin
,

iangsu Zhongwei Measurement and Control Co., Ltd.

Contact

Phone

18852328848

Fax

0517-86918679
Nozzle flowmeter
Description:

Products overview:

ZW series of LGPNozzle flowmeterHas a long history background, all kinds of test data is complete.Simple structure, no moving parts, stable and reliable long-term use, rich experience in design and manufacture and application.Doesn't need a high degree of standardization, solid flow calibration.Standard orifice has reliable experimental data and improve the international and national standards.In foreign countries and has its inherent in the huge domestic market, users are familiar with, data;Follow the international standard calculation and processing, use agile and convenient;The most widely used in domestic flow measurement is still the differential pressure type flowmeter.

Nozzle with high temperature and high pressure resistance, impact resistance, long service life, large measuring range and accuracy of measurement, suitable for high power plant high temperature and high pressure steam heat-supply pipeline flow of fluid flow measurement.Standard nozzle design and manufacture according to GB/T2624-93, according to JJG640-94 verification, without real flow calibration.

Second, the working principle:
ZW series of LGPThe principle is to use the throttle nozzle flowmeter flow sensor.It adopt special on the basis of the nozzle pressure (pressure) throat way, make the flow sensor not only has the advantages of traditional long neck nozzle, at the same time also have outflow coefficient of stability, repeatability of higher unique advantages.Is a kind of high precision flow sensor.Flow calculation formula:

Type: - mass flow respectively (㎏ / s) and the volume flow (m3 / s);
- flow coefficient;
- expansiveness coefficient;
-- the throttle hole diameter, m;
- diameter ratio,
- pipe diameter, m;
- the flow volume density, ㎏ / m;
-- differential pressure, Pa;

By measuring the pressure difference to measure the size of the fluid flow.This kind of measurement method based on the energy conservation law and the law of flow continuity as a benchmark.Fluid filled with pipes, when they flow through the pipe of the throttle device, a beam will local contraction at the throttling of the throttle device, so that the flow velocity increases, the static pressure is low, so the throttling parts before and after the pressure drop is produced, the pressure difference, the greater the flow of medium flow, on the throttling the greater the pressure difference before and after.
Applications:
ZW series of LGPNozzle flow meter is to measure flow differential pressure generator, cooperate with all sorts of differential pressure gauge or differential pressure transmitter to measure all kinds of fluid flow in pipes.Standard nozzle throttling device with differential pressure transmitter, can measure the rate of flow of liquid, steam, gas, widely used in petroleum, chemical, metallurgical, power, light industry and other departments.Measured medium is as follows:

1, liquid: hot and cold water, chemical liquid, light body oil.
2, gas, blast furnace gas, coke oven gas, all kinds of single-component multicomponent gas.
3, superheated steam and saturated steam.
4, compressed air.
5, natural gas, the torch gas, liquefied petroleum gas.

Four, the main features:

1, the throttle device structure easy to copy, simple, firm, stable and reliable performance, long service life, low price.
2, nozzle adopt international standards and processing
3, nozzle application range is wide, all single-phase flow are measured, partially miscible flow can also be applied.
4, standard throttle device without real flow calibration, putting-in-service proactively.
5, using imported monocrystalline silicon intelligent differential pressure sensor
6, high precision, perfect the self-diagnosis function
7, the intelligent standard nozzle intelligent orifice flowmeter range can be adjusted from the programming.
8, intelligent standard nozzle can be displayed at the same time the cumulative flow and transient flow, pressure, temperature.
9, have the functions of online, dynamic full compensation, intelligent orifice plate flowmeter has since diagnosis, set range.

Five, the technical parameters:

1, the nominal diameter: 20 mm or less DN 630 mm or less;
2, nominal pressure: PN acuities were 32 mpa;
3, working temperature: - 50 ℃ or less t 550 ℃ or less;
4, Reynolds number range: 0.30 beta 0.44 or less, or less 70000 ReD 107 or less or less;
0.44 beta 0.8 or less, or less 20000 ReD 107 or less or less;
5, throat diameter ratio: 0.30 beta 0.80 or less or less;
6, precision: 0.5, 1.0, 1.5, 2.0;
7, the reference standard: GB/T2624-2006, JJG640-94;
8, connection mode: flange, welding.

Six, orifice plate and nozzle flowmeter are two different types of differential pressure type flowmeter:
1, the nozzle flow meter
Advantages: long neck nozzle has a long history, there are a large number of all kinds of test data, the nozzle flow meter has simple structure and firm, no moving parts, stable and reliable long-term use, rich experience in design and manufacture and application, high degree of standardization, can need not to flow calibration.Standard nozzle has reliable experimental data and improve the international and national standards.Authentic measurement data, can be used as a trade settlement measurement table.
Disadvantages: manufacturing complex, the unit price is higher.
2, the orifice plate
Orifice meter advantages: high cost performance.Standard orifice plate has a long history, the international and national standards and verification regulations and a large number of experimental data, without real flow calibration.Authentic measurement data, can be used as a trade settlement measurement table.
Faults: orifice acute Angle edge wear, dirt and other factors will affect measuring accuracy.Verification cycle short 6 to 12 months.
Seven, the structure form:
Nozzle flowmeter by part A, perpendicular to the axis of the entrance surface of circular arc form surface B and C part and shrinkage of the entrance of the cylindrical throat E and protection of the edge of to prevent damage to the groove of F, its take pressure way upstream pressure mouth Angle of using access, downstream take pressure can be set up by the pressure of Angle joint, also can be set up in the far downstream.The total length of the nozzle
A, when 0.30 beta 2/3 or less or less, the nozzle length = 0.6041 d.
B, when two-thirds beta 0.80 or less or less, the nozzle length = {0.4041 + (0.75 / beta 0.25 beta 2-0.5225) 0.5} d;
C, ISA 1932 nozzle upstream face by perpendicular to the axis plane and profile for the two arcs of a circular, cylindrical throat and groove for the identified contraction of the nozzle.ISA1932 nozzle way of selecting pressure Angle only pressure a pick up.
Eight, notable matters of installation:
1, can be horizontal, vertical or inclined installation, should guarantee the tube filled with liquid.
2, the throttle device before and after the straight pipe should be straight, bend without visible to the naked eye, at the same time, should be "round", inner surface should be clean, without potholes and sediment;
3 and the request of straight section length and throttling device installation should be in conformity with the relevant provisions of the GB/T26224-93.
4, lead pressure pipeline installation should comply with the standards stipulated by the regulations.

Nine, scope of application and characteristics:

Throttling a name

Apply pipe

(DN mm)

Apply to diameter ratioB(d/D)

Application characteristics

Uncertainty of outflow coefficientEc%

Design criteria

Angle of access standard orifice plate

Ring chamber type

50-500

50-500

0.2-0.75

0.2-0.75

Apply to clean mediumGDUnder the condition of structure is suitable for high temperature and high pressure flow rate measurement

0.6-0.75%

ISO5167

GB/T2624-93

The clamping ring type

50-500

0.2-0.75

Easy to remove dirt, and can be used to clean fluid flow measurement

Oblique hole type

450-1000(3000)

0.2-0.75

Flange pressure standard orifice plate

50-1000

0.2-0.75

Easy to remove dirt, and are suitable for all kinds of media

0.6-0.75%

ISO5167

GB/T2624-93

Span with standard orifice plate

50-1000

0.2-0.75

Angle access standard pressure nozzle

(ISA1932Nozzle)

50-500

0.3-0.8

Small pressure loss, long life, especially suitable for steam flow measurement

0.8-1.2%

ISO5167

GB/T2624-93

The length to diameter nozzle

50-630

0.2-0.8

Small pressure loss of long service life,LGPType of length to diameter nozzle components for high parameters of water and steam flow measurement

2.0%

ISO5167

GB/T2624-93

Classic venturi tube

Mechanical processing type

100-800

0.2-0.8

The pressure loss is small, straight pipe required less than orifice, nozzle

1.0%

ISO5167

GB/T2624-93

Soldering iron plate type

200-1200(2000)

0.4-0.7

1.5%

Venturi nozzle

65-500

0.316-0.77

Same as above

1.2-1.75%

ISO5167

GB/T2624-93

A quarterRound hole plate

25-150

0.245-0.6

Suitable for low Reynolds number

2.0-2.5%

DIN BS

Conical inlet orifice

25-250

0.1-0.316

Same as above

2.0%

BS

Segmental orifice

50-1500

0.32-0.8

Apply to the smudges, there are air bubbles or containing solid particles flow measurement.

1.5%

DIN

The eccentric orifice plate

100-1000

0.46-0.84

1-2%

ASME

Small hole plate

12.5-40

0.2-0.75

Applicable to small pipe flow measurement

0.75%

ASME

Lens type orifice

12.5-150

0.2-0.75

Suitable for high pressure temperature small pipe flow measurement

0.6-0.75%

ISO5167ASME

Ten, classification model parameter table:

The name of the

model

Take pressure way

Nominal pipe diameter (mm)

Nominal pressure (MPa)

Execution standard (structure)

The standard orifice plate

LGB

Pressure Angle joint (annulus)

50~400

Less than10

GB2624 K07

LGB-Z

Pressure Angle joint (drilling)

400~2000

Less than1.6

LGB

Ring chamber (8 slot)

50~400

Less than32

The flow measurement manual

LGB

Ring room (no flange welded)

50~275

Less than28.22

The flow measurement manual

LGB-F

The flange to take pressure

50~800

Less than2.5

GB2624 K06

LGB-F

The flange to take pressure

50~400

4.0~40

GB2624 K06

LGB-J

Diameter of pressure

50~760

Less than10

GB2624

Standard nozzle

LGP

Pressure Angle joint (annulus)

50~400

Less than10

GB2624

The flow measurement manual

LGP-Z

Pressure Angle joint (drilling)

400~500

Less than1.6

LGP

Ring chamber (8 slot)

50~300

Less than32

The flow measurement manual

LGP

Ring room (high pressure lens pad)

15~150

Less than32

LGP

Ring room (no flange welded)

175~350

Less than17.36

DG 0702~0710

The length to diameter nozzle

LGC-J

Diameter of pressure

50~630

Less than16

GB2624

A quarterRound hole plate

LGH

Take pressure Angle joint

50~260

Less than10

GB2624

The flow measurement manual

LGH-F

The flange to take pressure

50~200

Less than6.4

Venturi nozzle

LGL

Take pressure Angle joint

65~500

Less than2.5

Venturi tube

LGW

Take special pressure

50~1200

Less than2.5

Double venturi tube

LGW-S

Take special pressure

Less than1000

Less than0.6

Small diameter orifice

LGX

Take pressure Angle joint

12~40

Less than6.4

K07(LanHua)

LGX-F

The flange to take pressure

12~40

Less than6.4

The enterprise standard

High pressure lens gasket

LGT

Take pressure Angle joint

50~150

Less than32

The flow measurement manual

Segmental orifice

LGQ

Pressure Angle joint (annulus)

100~400

Less than1.6

LGQ-Z

Pressure Angle joint (drilling)

400~1000

Less than1.6

LGQ-F

The flange to take pressure

100~350

Less than6.4

Double orifice

LGS

Take pressure Angle joint

100~400

Less than6.4

The eccentric orifice plate

LGN

Take pressure Angle joint

100~1000

Less than6.4

Current limit orifice

LG-XL


10~300

Less than6.4

The enterprise standard

Conical inlet orifice

LGR

Take pressure Angle joint

25~1000

Less than10

GB2624

The wing wind device

LJY

Take special pressure

Less than1000

Less than0.6

The enterprise standard

Eleven, selection of coding:

model

said Ming

ZW-LG

The throttle device (wei measurement and control)


Code name

According to the structure characteristics of the two basic categories


B

The standard orifice plate


P

Standard nozzle


Code name

Nominal pressure (105Pa)


2.5

2.5


10

10


16

16


25

25


64

64


100

100


200

200


Code name

CAL(mm)


15~1200

15~1200mm


Code name

According to its structure form of segmentation


H

The standard orifice plate(Ring chamber)


Y

The standard orifice plate(The flange)


K

The standard orifice plate(drilling)


I

ISA 1932The nozzle


L

The length to diameter nozzle


W

Venturi nozzle


G

Classic venturi tube


S

Double orifice


Q

Segmental orifice


Z

Conical inlet orifice


R

A quarterRound hole plate


P

The eccentric orifice plate


N

As a whole(Hidden within)Orifice plate


X

Wedge orifice


T

Out of place in the above special throttling device


Code name

medium


1

liquid


2

gas


3

steam


4

High temperature liquid


Code name

Compensation in the form of


N

Without pressure and temperature compensation


P

With pressure compensation output


T

With temperature compensation output


Q

With compensation output pressure and temperature


Code name

Differential pressure transmitter range scope


0

Micro differential pressure range


1

Low differential pressure range


2

The differential pressure range


3

Elevation difference pressure range


Code name

Whether or not to bring a live show


W

The throttle device sensors


X

Intelligent throttling device

13 order, design notes:

When you place an order, please provide the following conditions in order to help the correct choice of the specifications of the flowmeter and coefficient.

1, pipe size: diameter x wall thickness (mm);

2, measuring medium name: medium density (kg/m3);

3, set the flow range: meter range of upper limit and lower limit (kg/h or m3 / h);

5, work pressure (Mpa);

6, work temperature: (° C);

7, such as wei in my company, please provide together: intelligent flow totalizer.especially pressure range, or pressure transmitter type, range;Temperature range, or models, range temperature transmitter.

After-sales service commitment:

1, from the date of signing of the contract, I in the way provided for products of the company offers free maintenance and maintenance service, commitment to lifelong maintenance service;

2, jiangsu wei measurement and control instrument co., LTD. Sales manager will be in regular contact with customers, understand the usage of products, and solve the problems of the customers to use in the process of produce, free of charge to provide technical support;

3 the man-made damage is found, the warranty period, our company is responsible for the maintenance, and the resulting maintenance fee;

4, product quality problems or are not satisfied with product, the user can choose unconditional return, wei tt&c don't charge any fees, appear quality problem, bear the freight back and forth.


iangsu Zhongwei Measurement and Control Co., Ltd. is located in Huaian City, the hometown of Premier Zhou, a great man of one generation. It has beautiful scenery, pleasant climate and abundant products. Main Products: Main Products: Intelligent Vortex Street Flowmeter, Intelligent Electromagnetic Flowmeter, Liquid Turbine Flowmeter, Elliptical Gear Flowmeter, Universal Electronic Flowmeter, Magnetoelectricity Flowmeter, Swirl Flowmeter, Metal Tube Float Meter, Wilba Flowmeter, Delta Bar Flowmeter, Orifice Flowmeter, Balanced Flowmeter, Air Measuring Device, Heat Meter, Ultrasound Flow Meter Meters, magneto-sensitive electronic double-color liquid level gauge, boiler drum level gauge, mica double-color water level gauge, radar level gauge, ultrasonic level gauge, magnetic turning plate level gauge, level (level) switch, pressure differential pressure transmitter, thermometer, thermoresistor, thermocouple, display, recorder, calibration equipment, wire and cable, control valve, etc. Professional R&D and sales of industrial automation products, providing integrated technical services of industrial automation system, is a comprehensive industrial automation product R&D and technology enterprise in China, which is built and developed at the beginning of the industry scale.The company's quality assurance system is complete. The company has a number of high-tech professionals engaged in the design, development, installation and commissioning of automation control research for a long time, which provides a satisfactory set of systems for various industries. It gathers strong professional team, accumulates abundant technology and management experience, covers the national marketing network and branches, and can provide users with technical services quickly and conveniently. In the era of Internet commerce, the company has set up the E-Commerce Department, relying on professional network technology and e-commerce trade means, to implement the integration of traditional economy and resources as well as rapid market expansion in a wide range. Since its establishment, the company has established a long-term and stable business and trade partnership with manufacturers in various regions by virtue of its good reputation and high-quality service.In line with the business philosophy of "satisfying customer's needs and creating value for customers", we have provided a large number of complete sets of services for users in oil field, power, chemical industry, metallurgy, paper-making, cement and other industries for many years to improve more seamless services for our customers. You can purchase online, learn business knowledge independently, serve your customers better, and create more value for you for five consecutive years. Our products are sold overseas, and we have distribution agents in many regions to further increase domestic marketing and expand the brand of Zhongwei. From 2011, we will recruit agents and distribute in the whole country. We can also provide OEM services for you. The quality service is consistent with that of Jiangsu Zhongwei. We promise you the best quality, the best service and the best price!The company adheres to the development policy of "science and technology, innovation, quality and service", continues to adhere to the purpose of "building an industrial aircraft carrier and contributing to the national economy". In the future development, it will continue to devote itself to brand building and constantly cultivate new economic growth points. Jiangsu Zhongwei will actively participate in market competition with high-quality products, preferential prices and excellent services, and wholeheartedly participate in friends from all walks of life. Friends, old and new customers cooperate in good faith, work hand in hand with Zhongwei measurement and control, create a better tomorrow.
Similar Product Recommend