Welcome Customer !

Membership

XwbooElectronic ComponentsSensorTemperature SensorNTC Temp Sensor For Air Conditioning
  • $item.Title
  • $item.Title

NTC Temp Sensor For Air Conditioning

Hefei Jingpu Sensor Technology Co.,Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Temperature Sensor
Place of Origin
AnHui, HeFei
Comply for RoHS standardPVC insulated lead wires temperature sensor, measuring temperature range: -20℃~105℃ (-22°F to +221°F)Waterproof Aluminum/Copper shell

Brief Instruction:

The air conditioner temperature sensor is mainly used in the air conditioner evaporator. Air conditioning temperature sensor mainly consists of several parts: insulation wire (PVC wire, cross-linked polyethylene insulation wire), NTC chip and epoxy resin, aluminum shell. Resistance values range from 0.3kΩ to 2000kΩ, beta values range from 2500K to 4500K.


Features:

Comply for ROHS(Restriction of Hazardous Substances) standard, it's a mandatory standard set by European Union legislation

PVC insulated lead wires temperature sensor, measuring temperature range: -20℃~105℃ (-22°F to +221°F)

Waterproof Aluminum/Copper shell

Widely Application:

A/C Air conditioning Evaporator

For Household Appliances: Air conditioner, referigerator, freezer, water heater, air heater, dishwasher, etc.

For Car: Auto air conditioner, water temperature sensor, intake air temperature sensor, engine.

Temperature Control System: Greehouse, acquarium, etc.


Structure and Dimensions:

1

Electrical specification:



Product picture:

Mode of Carriage:

The difference between the thermocouple and the thermal resistance

1. Although both are contact thermometers, thermocouple and thermal resistance have different temperature ranges. Thermocouple used in high temperature environment, because they are in the low temperature zone thermoelectric potential output is small (we can have a look at the table), when the electric potential, the measures against interference and the second table and requirement is high, otherwise the measurement, and, in the region of the low temperature, the change of the cold end temperature and the relative error caused by the change of environmental temperature is very outstanding, is not easy to get full compensation. At this time in low and medium temperature, the general use of thermal resistance temperature range is 200-500, and even lower temperature can be measured (such as carbon resistance can be measured to the low temperature of about 1K). Now the normal use of platinum thermal resistance Pt100,(there are also Pt50, 100 and 50 represents the resistance value of thermal resistance at 0 degrees, in the old scale with BA1, BA2 to represent, BA1 at 0 degrees resistance value of 46 ohms, in the industry also useful copper resistance, the scale is CU50 and CU100, Between a 50- 150 in some special occasions and steel resistance, manganese resistance, etc.). Therefore, in the general temperature environment, the performance advantage of thermal resistance is more obvious, and the use method is also more simple.

2. According to the principle of thermocouple temperature measurement, only when the temperature of its cold end is constant, the measured temperature is a single value function with the thermoelectric potential. In practice, a cheap connection wire (also called compensation wire) with similar thermoelectric characteristics to the corresponding thermocouple is used to extend the cold end of the thermocouple to a relatively constant temperature (preferably 0 degrees). For example, copper and copper are used as compensation wire to extend nickel-silicon thermal resistance. Therefore, the thermocouple to the two table extension wire is two. The thermal resistance and the secondary meter are connected by copper wires. In order to reduce the measurement error caused by environmental changes, the three-wire connection method is generally adopted, in which two wires connect the thermal resistance in series on two adjacent bridge arms, and the other wire is the source of power. When used, the sum of the resistance value of each wire and the adjustment resistance should be guaranteed to be 5 ohms (+0.01).

Hot Tags: NTC Temp Sensor For Air Conditioning, China, suppliers, manufacturers, factory, customized, wholesale, price, cheap, Russian, free sample, made in China, Insulated Wire NTC Thermistor, Film thermistor, 5K 10K 100K Thermal probe, NTC Chip, Temperature sensor for Photovoltaic system, Thread Type Temperature Probe

  This is Hefei Jingpu Sensor Technology Co.,Ltd. Jingpu Sensor is a national high-tech enterprise integrating R&D, production and sales of thermistors and temperature sensors. The products include various epoxy-encapsulated and glass-encapsulated thermistors, as well as various temperature sensor assemblies, which are widely used in medical (eg: supporting monitors, medical equipment, bacterial incubators, medical refreigerators, etc.), smart wear, Auto (eg: water temperature, oil temperature, air conditioner, filter, intake pressure temperature, steering wheel, rearview mirroe, tire, battery pack, etc.), domestic appliances (eg: air conditioner, refrigerator, electric water heater, induction cooker, boiling water boiler, electronic Calendar, etc.), power, fire alarm, meteorology, ocean and other fields.
Similar Product Recommend