Welcome Customer !

Membership

XwbooPlastic MachineryExtruderOther Extrudersopening Milling Machine (6inch)
  • $item.Title
  • $item.Title

opening Milling Machine (6inch)

Ningbo Mengkwa Machinery Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Other Extruders
Place of Origin
,

Ningbo Mengkwa Machinery Co., Ltd.

Contact

Phone

Fax

86-574-86827236,87026377
opening Milling Machine (6inch)

                                             

                            
Opening Milling Machine (6inch)

 
Special note 
Opening Milling Machine (6inch)
Details
Parameter
Opening Milling Machine (6inch)
Heating type
Cooling type
(MWK-160L)
Electric Heating type
(
MWK-160R)
Oil heating type(MWK-160Y)
Oil/electricity/cooling type
(Double speed-double FM:MWK-160S)
Oil/electricity/cooling type
(Single speed-Single FM:MWK-160D)
Mixing capacity

 0.1--3kgs
Roller temperature
Normal temperature-tap water℃
normal temperature~300℃
Temperature precision
no request
±3℃ static state (Temperature controller is using high precisoin P I D intelligent microcomputer control system
,higher precisoin than manual setting; with over-temperature warning function to protect machine and production material)
Heating type

Natural friction
 
Roller rotation speed
Fixed speed (15 turn around)
Speed Converter
(15 turn around)
other speed could be booked
Roller ratio
1:1.25
adjustable
Roller size
Taiwan made high hardness; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance
ф160mm×L 320mm; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance

Taiwan made high hardness; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance


Roller distance
 0~6mm adjustable
Safety device
many touch-type emegency stopper (with reverse function, safety first, humanization design, injury
Motor
5.5KW1pc( latest technical design,machine structure adjusting,and traditional technical mechnical drive 7.5KW, same output torque force, to realize enegrgy saving)
1KW1pc( latest technical design,machine structure adjusting,and traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving)
1. KW2pcs ( latest technical design,machine structure adjusting,and traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving)
1. KW2pcs ( latest technical design,machine structure adjusting,and traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving)

Power
8HP
Dimension
(W×D×H) 1200×550×1300mm(smaller dimension and little area-wasting than traditional technology under the same function
Roller lubricating
wear-resisting bearing large contact area;two-thirds of the service life longer than conventional copper
Machine structure
steel plate
( more light, samller dimension, higher mechnical strength, better toughness than traditional technology
)
Power
3∮,AC380V,8A
Others
Multiple safety protection device at front and rear to ensure the safety of operators (sync control by hands and feet - stop - reverse)
Positive safety device includes: an emergency stop button on both left and right, power switch, stop switch, machine body point action reverse door.
Back safety device includes: an emergency stop button on the left and right, machine body point action reverse door.
Oil filling: machine plat is equipped with a lubricating grease gun; butter oil is more wearable than other oil, extending life span of machine.
Pots: SS, easy to clean, pollution-free rust, permanent use
there are two wear-resistant high-temperature profiles at the two ends of roller for the flexible adjusting for width. Any qty of refining rubber could be achieved.
Little refining rubber: adjust to the middle/
Much refining rubber: adjust to both sides.

Ningbo MengKwa Machinery Co., Ltd. is located in NingBo city , Zhejiang Province in China.It is only 10km from Ningbo Airport, and it is around 300km far from Shanghai.We have more than 12 years experience in producing and export different kinds of plastic machinerry. With advanced technology and experience, we produce plastic extrusion line: pipe extrusion line,profile extrusion line, sheet & board extrusion line, foam extrusion line,soft PVC extrusion line, plastic palletizing and recycle line, rubber extruder and vulcanization production line, and etc. We provide perfect after sale service for our clients, such as installation, debugging, and also equipment modification and upgrading etc. We will always strive to keep forging ahead and making innovations.Meanwhile, we're willing to establish good relationships with both domestic and international customers to create new heights in the plastic machinery industry.
Similar Product Recommend