Membership
Help
Wuxi Tairan Environmental Protection Technology Co., Ltd
Wuxi Tairan Environmental Protection Technology Co., Ltd
Application field
Food processing industry: disinfection of production water, production workshops, packaging rooms, dressing rooms, sterile rooms, production equipment and tools.
Beverage processing industry: pure water, mineral water, production water for various beverages, production workshops, packaging rooms, changing rooms, sterile rooms, disinfection of production equipment and tools.
Fruit and vegetable processing industry: fruit and vegetable storage, preservation, processing and production water, production workshop, packaging room, changing room, sterile room, disinfection and disinfection of production equipment and tools.
Cold storage preservation: fruits and vegetables, grains, poultry eggs, meat, aquatic products, etc., preserve freshness and prolong storage.
Pharmaceutical industry: disinfection of production water, central air-conditioning system, workshop, dressing room, sterile room, etc.
Pharmaceutical industry: pharmaceutical factories, hospital wards, beds, quilts, operating rooms, medical equipment, sterile rooms, etc.
Cultivation and planting industry: sterilization, disinfection, deodorization, air purification, etc. for chicken, fish, vegetable greenhouses, etc.
Drinking water: deep well water, municipal water supply, secondary pressurized water supply, rural drinking water, etc.
Public places: hotels, restaurants, schools, Internet cafes, waiting halls, etc. to purify the air, prevent crossover, etc.
In addition, it can be used in reclaimed water, sewage, waste water, exhaust gas, and water purification and air purification in swimming pools and swimming pools.
Technical specifications
Output: 1-60kg/h
Air source: oxygen source
Power supply: 380V.50/60Hz
Ozone concentration: 80-180mg/L (oxygen source)
Power consumption: 8kwh/kgO3 (oxygen source)
Inlet pressure: -60℃ Inlet and outlet pressure: 0.2-0.5Mpa, 0.05-0.15Mpa
Operating environment temperature: -10℃-50℃ Output adjustment: 1-99%
Cooling method: water cooling (open water cooling, closed circuit water cooling can be selected)
Cooling water volume: 1.25T/kg .O3.h (oxygen)
Ozone host device size: Set according to the output size.
Ozone host material: the discharge chamber is made of sus304 stainless steel, the control cabinet is made of carbon steel spray treatment, and the host has a fixed base.
Features
The composition of the ozone generator is mainly composed of the following parts.
1: Air source treatment-oxygen source treatment process diagram,
Liquid Oxygen-----Carburetor---Reducing Valve -----Filter----Ozone Generator
2. Power control part:
The important components of power supply control are Tairan's ozone PLC control system, IGBT modules, and transformers.
3. Circulating cooling water system:
Circulating cooling water system includes water pump, plate heat exchanger, expansion tank, matching valve and instrument.
Ozone generator principle:
High-voltage discharge generator uses a certain frequency of high-voltage current to create a high-voltage corona electric field, which makes the oxygen molecules in or around the electric field electrochemically react to produce ozone. This kind of ozone generator has the advantages of mature technology, stable operation, long service life and large ozone output, so it is the ozone generator used in related industries at home and abroad. In the high-voltage discharge ozone generator, it is divided into the following types:
1. Divided according to the generator's high-voltage electric frequency: there are three types: power frequency (50-60Hz), intermediate frequency (400-1000Hz) and high frequency (>1000Hz). Power frequency generators have basically withdrawn from the market due to their shortcomings such as large size and high power consumption. The medium and high frequency generators have the advantages of small size, low power consumption, and large ozone output. They are commonly used products now.
2, according to the gas raw materials used: there are two types of oxygen and air. The oxygen type is usually supplied with oxygen from an oxygen cylinder or an oxygen generator. The air type usually uses air (such as compressed air) as a raw material. Because ozone is produced by oxygen, and the oxygen content in the air is only 21%, the concentration of ozone produced by air-type generators is relatively low, and nitrogen compounds are also derived. The oxygen purity of the bottled or oxygen generator is above 90%, so the ozone concentration of the oxygen generator is relatively high. In environmental disinfection, air-type generators are usually used. In water treatment, priority should be given to oxygen-type generators. But if the generator needs to be used with the old ozone mixing tower when disinfecting drinking water, only the air type can be used.
3. Divided by cooling method: water-cooled and air-cooled. When the ozone generator is working, it will generate a lot of heat energy and needs to be cooled, otherwise the ozone will be decomposed due to the high temperature. The water-cooled generator has good cooling effect, stable operation, no ozone attenuation, and can work continuously for a long time, but the structure is complicated and the cost is slightly higher. The air-cooled cooling effect is not ideal, and the ozone attenuation is obvious. Large generators or generators used in important places are usually water-cooled. Air cooling is generally only used for generators with small ozone output or places where generator performance requirements are not strict. When choosing a generator, try to choose a water-cooled type.
4. Divided by dielectric materials: common types include quartz tubes, ceramic plates, ceramic tubes, glass tubes and enamel tubes. Among them, the quartz tube is often used by some high-performance ozone generators because of its high dielectric constant, uniform wall thickness, good ovality, high temperature resistance, and moisture resistance. The ceramic plate is easy to be brittle and only suitable for some small generators. The wall thickness and ellipticity of ceramic tubes are not easy to control, and the problem of uneven discharge is prone to occur, so they are not used much. Glass tube and enamel tube have low dielectric constant, poor high temperature resistance, and easy to burst. They are only used in some low-end generators.
5. According to the structure of ozone generating parts: there are two types: closed type and open type. The structural feature of the closed generator is that the sealing body itself is an electrode, and ozone can be used intensively, such as for water treatment. The electrodes of the open generator are exposed in the air, and the ozone produced cannot be used intensively, and is usually only used for air purification in a small space or surface disinfection of some small items. The closed generator can be used instead of the open generator. The cost of a closed generator is much higher than that of an open generator. It is worth noting that some people now rigidly encapsulate the open generator and pretend to be a closed generator. The result of this is that a large amount of heat cannot be dissipated in time, the ozone is attenuated seriously, and the generator is quickly burned out.