Welcome Customer !

Membership

XwbooElectrical & ElectronicsSwitchOther SwitchesP-70 Porcelain Post Insulator
  • $item.Title
  • $item.Title

P-70 Porcelain Post Insulator

Jiangxi Johnson Electric Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Switches
Place of Origin
JiangXi, PingXiang
Post insulator is a special insulation control which can play an important role in overhead transmission line. In the early years, pillar insulators were mostly used for telephone poles, which were gradually developed to hang a lot of suspension-like insulators at the end of the high-voltage wire connection tower to increase the creepage distance. They are usually made of silica gel or ceramic, and are called insulators.High voltage line rod insulator is used as insulation and supporting conductor in high voltage t......

Product Definition

Post insulator is a special insulation control which can play an important role in overhead transmission line. In the early years, pillar insulators were mostly used for telephone poles, which were gradually developed to hang a lot of suspension-like insulators at the end of the high-voltage wire connection tower to increase the creepage distance. They are usually made of silica gel or ceramic, and are called insulators.
Insulator in overhead transmission lines with two basic role, namely support wire and prevent the current back, these two functions must be guaranteed, insulator should not produce change due to environmental and electrical load conditions lead to breakdown and flashover failure, or insulator will be lost, will damage the whole line of use and operating life.

Performance

1. Post insulators are in accordance with the provisions of GB8287.1 “Technical Conditions for High Voltage Post Porcelain Insulators” and GB12744 “Pollution Resistant Outdoor Bar Post Porcelain Insulators”. It also complies with the requirements of the international standard IEC168, Tests on Ceramic or glass Post Insulators for internal and outdoor use in systems with nominal Voltages above 1000 V, and IEC publication 815, Guidelines for the selection of Insulators under pollution conditions.

2, insulator mechanical strength is high, small dispersion, safe and reliable operation.

3, insulator low temperature mechanical performance is good.
In order to test the cryogenic mechanical properties of the product, the zSW1-110/4 insulator was tested in the cryogenic laboratory of the Institute of Water Resources, Songliao Water Conservancy Commission, to simulate the change of outdoor temperature in winter. After several temperature cycles, the test crystals were tested for bending failure at low temperature. The test results show that the bending failure strength of insulators at -40℃ has no significant change compared with that at room temperature.

4. Low radio interference.
An insulator with rated voltage of 550kV can produce radio interference not greater than 500μV at 1.1 times the maximum operating phase voltage, no visible corona on a clear night, and visible corona voltage up to 450kV.

P-70 Porcelain Post Insulator (6)


  Jiangxi Johnson Electric Co.,Ltd. was one manufacturing-trading company,it was established by 1、Pingxiang Qiangsheng Electric Porcelain Manufacturing Co., Ltd, 2、Pingxiang City Huakun Electric Appliance Manufacturing Co., Ltd,3、 Pingxiang East China Export Electric Porcelain Co., Ltd on Oct 2016.They are all among the most qualified manufacturers of porcelain products in Pingxiang City, Jiangxi Province, China.Our factories have been dedicated to manufacturing porcelain insulators for a long time, especially for East China Export, it has got a 20 years history of porcelain insulator manufacture. Our monthly production capacity is about 3,000 tons. Our products, mainly operate on and under 220kv voltage, such as power line porcelain insulator, electric appliance porcelain, power station porcelain, railway long rod porcelain and so on. The products has over 20 categories, more than 200 types. Besides, we accept customer design.
Similar Product Recommend