Membership
Help
Shenzhen Ho-link Technology Co., Limited
Shenzhen Ho-link Technology Co., Limited
Features
1.Maximum support 4096*2160@30Hz downward compatibility
2.Support international standard HDCP 1.4
3.EDID transparent transmission mode
4.Support RGB4:4:4 YUV4:4:4 4:2:2 4:2:0
5.Support DDC CEC HPD signal
6.Support 4K HDMI video with loop-out
7.Support KVM function (keyboard and mouse)
8.Support 1 channel reverse IR infrared transmission (optional)
9.Support 1 channel bidirectional independent 3.5 stereo audio, forward support audio embedding / unembedding function
10.Support 1 channel bidirectional full-duplex RS232 (optional half-duplex RS485)
11.1 channel reverse contact closure function (optional)
12.Single-fiber/dual-fiber (optional)
13.Single mode / multi-mode compatibility, multi-mode transmission distance of 1KM, single-mode transmission distance of 10KM
14.Delay < 2 ms
15.Support hot swap signal, plug and play, no setting required
Technical Indexes
Fiber index | |||||
Wavelength | 1310-1550nm | ||||
Bit rate | 10Gbps | ||||
Tx power | >-5db | ||||
Rx sensitivity | >-14db | ||||
Fiber connector | LC | ||||
Video index | |||||
Video bandwidth | 10Gbps | ||||
Maximum resolution | 4096*2160@30Hz downward compatibility | ||||
Maximum pixel clock | 297MHZ | ||||
Effective cable length | 10M | ||||
Physical interface | HDMI female | ||||
KVM(USB) index | |||||
Version | 1.1 | ||||
Tx physical interface | USB female type B | ||||
Rx physical interface | USB female type A | ||||
Audio index | |||||
Sampling frequency | 48K | ||||
Sampling depth | 24bit | ||||
Dynamic bandwidth | 96db | ||||
Total harmonical distortion (THD) | -88db | ||||
| 96db | ||||
Audio input/output impedance
| 600Ω | ||||
Signal level | VPP 3.5V | ||||
Physical interface | 3.5mm stereo audio socket | ||||
Signal type | stereo audio | ||||
IR index | |||||
Parameter | Min | Type | Max | Unit | Condition |
Optical current | 200 | - | 1030 | uA | IF=4mA,VCE=3.5V |
Peak wavelength | - | 940 | - | nm | 1F=20mA |
Spectrum voltage | - | 80 | - | nm | 1F=20mA |
View angle | - | ±30 | - | Deg | 1F=20mA |
Forward voltage | - | 1.2 | 1.6 | V | 1F=20mA |
Reverse current | - | - | 10 | uA | VR=5V |
RS232 (3-wire system, full duplex) index | |||||
Baud rate | 256000Hz downward compatibility | ||||
Data bits | 8 digits | ||||
Physical interface | 3-pin phoenix terminal | ||||
RS 485 (2-wire system, half duplex) index | |||||
Error rate | <10^-9 | ||||
Bit rate | 0-400Kbps | ||||
Physical interface | 3-pin phoenix terminal | ||||
Contact closure index | |||||
Input electrical parameters | Dry node, not charged (short or disconnected) | ||||
Output electrical parameters | Dry node, not charged (short or disconnected) | ||||
Output relay maximum switching voltage | 250VAC/220VDC | ||||
Output relay maximum switching current | 2A | ||||
Mechanical durability of output relay | 100,000,000times | ||||
Maximum output power of relay | 60W | ||||
Physical interface | 2-pin phoenix terminal (transmitter) Switch button (receiver) | ||||
Other index | |||||
Operating temperature | -20°C ~75°C | ||||
Storage temperature | -40°C ~85°C | ||||
Power supply | 12V1A | ||||
Power dissipation | <1.5W | ||||