Welcome Customer !

Membership

XwbooElectrical & ElectronicsVoltage detectorVoltage detector Partial Discharge Detector
  • $item.Title
  • $item.Title

Partial Discharge Detector

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Voltage detector
Place of Origin
HuBei, WuHan

Wuhan Goldhome Hipot Electrical Co., Ltd.

Contact

Phone

13720185294

Fax

Related categories
Charger specification Input :100-240V, 50/60Hz Output :voltage of 20V, current of 3.25AWorking hours:about 8 hoursWith the function of testing temperature and humidity to test environmental temperature and humidity in real time.
I. Introduction


Partial discharge phenomena of the electrical equipment have different impacts on equipment itself and the power grid, seriously leading to equipment scrapped and grid collapse. So it plays an essential role to monitor partial discharge of electrical equipment early, master the equipment running state accurately, eliminate the problems existing in the equipment timely and effectively for ensuring the safety of the equipment and the power grid itself. There are many ways for electrical equipment PD test, such as pulse current method, DGA method, ultrasonic method, RIV method, optical method, radio frequency method and chemical method, etc. Each method has its own strong points, in comparison, ultrasonic method is more simple and suitable for daily equipment spot inspection and timely mastering electrical equipment running state. The common PD faults of electrical equipment are corona, arc and tracking. Corona an early tracking will not generate heat, and the high temperature environment cover these phenomena, so they can not be detected by infrared thermal imager. But the phenomena will generate high heat, so the instrument can be used to test at a distance. Corona an serious tracking will generate both ultrasonic and high heat, therefore infrared and ultrasonic method can be used. When partial discharge happens in the equipment, it can not be found with the infrared method, while it can be tested with partial discharge detector on the surface or interface of electrical equipment.

Partial discharge detector is a detection device for diagnosing power line faults and hidden troubles by collecting abnormal ultrasonic signal in power lines and then through software analysis. It can judge hidden fault position and fault type without power cut. The device collect abnormal ultrasonic signal by ultrasonic detector (ultrasonic sensor) , then transmit the signals to the host, diagnose the fault and hidden trouble type and severity level, and convert to audible sound signal and the output waveform. It can help inspectors accurately find out faults and hidden dangers, prevent malignant faults happening, avoid unnecessary power cut, increase the reliability of power supply, Improve the efficiency of inspection personnel, and reduce the labor intensity of inspection personnel.

Hot tag:partial discharge tester,partial discharge test equipment,hand-held pd tester,portable partial discharge measuringment.


II. Function features


1.Portable design, small size, light weight, and easy to carry , so that one person can operate.

2.High brightness laser transmitter can realize fault location.

3.mega-pixel high-definition camera can easily focus detection point of failure and take photos of tower identification and faulty equipment.

4.Convert the abnormal ultrasonic signals detected by the instrument to audible sine signal and intuitive waveform, from which inspection personnel can clearly identify the discharge intensity.

5.Embedded GPS receiver automatically stores the coordinate data and provides GPS navigation, which convenient for query and save detection path.

6.With the function of testing temperature and humidity to test environmental temperature and humidity in real time.

7.With data storage capability to realize data playback.

8.The display is color touchscreen which is convenient for detection personnel to test and use.

9.High sensitivity and directivity can accurately locate the line fault.

10.Light weight, easy to carry, easy to operate make the test be carried out in a vehicle with a speed of 30km / h.

11.Ultrasonic test can be applied to a noisy environment, which can not be influenced by surrounding sound.

12.No-contact test whose effective testing distance is up to 30 meters makes test safe and reliable.

13.Live test does not affect the power grid’s normal operation.

14.The use of “ HM-ADMIN ” patrol background software can easily conduct data management and evaluation.


III.Technical parameters


System

WINCE6.0

CPU

Main frequency of 533MHz

Memory

RAM of 256MB DDR2, 1GB NandFlash

Screen

TFT true color touch screen of 4.3” ,resolution of 480 * 272

Interface

SD memory card,USB,serial port,earphones

SD memory card

TF card of more than 8G

Camera

3 mega-pixel high definition camera

Accessories

GPS,temperature /humidity measurement device,high brightness laser pointer

Storage function

GPS coordinate,time/date,temperature/humidity

Frequency range

20—150kHz

Sensor

40kHz x 1Ea

Working condition

-25℃ ~ 70℃

Relative humidity

0 - 95%

Charger specification

Input :100-240V, 50/60Hz

Output :voltage of 20V, current of 3.25A

Power supply

Battery power:lithium battery

Working hours:about 8 hours

Battery protection:LCD backlight will go dark, when there

is no operation within 5 minutes. The instrument will

automatically shutdown, when there is no operation within 20 minutes. When the battery power is less than 5%, system will beep hinting users to save data timely, then users need power it off and recharge.



IV.Product structure


12

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend