Welcome Customer !

Membership

XwbooElectrical & ElectronicsVoltage detectorVoltage detector Partial Discharge Equipment
  • $item.Title
  • $item.Title

Partial Discharge Equipment

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Voltage detector
Place of Origin
HuBei, WuHan

Wuhan Goldhome Hipot Electrical Co., Ltd.

Contact

Phone

13720185294

Fax

Related categories
Phase :single phaseFrequency:50HzRated capacity:150kVAInput voltage:0.4kVInput current:375A Output voltage:0~280kVOutput current: 0.53AWaveform deviation factor:≤3%Measurement winding voltage ratio:1000:1Insulation level: low voltage input terminal to ground power frequency voltage withstand level 5kV/1minDielectric loss: <0.3%Noise:≤60dB
Introduction


Power frequency Partial Discharge Equipment is used for checking the insulation level of all kinds of insulation materials ,insulation structure and electric products. Partial Discharge Equipment is also can be regarded as the partial discharge power source for the power transformers, capacitors, HV vacuum tubes ,CT PT, arrestors and other tested objects. Partial Discharge Equipment is widely adopted by electric manufacturers,electric running departments. Research unities and universities.


Partial discharge hipot tester features


1.This Partial Discharge Equipment specification is complete(from 10kVA/50kVto 1000kvA/1000kV ), even higher. All capacity and voltage levels we can customized, functions are improved.

2.The oil-filled testing transformer adopts the partial discharge epoxy insulated cylinder, it will make sure the minimum partial discharge amount. This craft is obvious advantage of field companies.

3.We adopts the high quality silicon steel sheet: DQ130-30 with grain oriented,45 ° inclined seams laminated,the waveform distortion and no-load current is the minimum in the domestic market.

4.Impedance voltage is very low, it is higher than the IEC standard.

5.The console adopts automatic industrial PLC system with computer photo-electricity skill.it has strong anti-interference and higher-automatic features.

6.It has quick-reflection electric protection system,very stable and shorten the harmless to devices.


PD hipot tester main parameters for 150kvA/280kV


1.Technical Parameter for Test Transformer

Phase :single phase

Frequency:50Hz

Rated capacity:150kVA

Input voltage:0.4kV

Input current:375A

Output voltage:0~280kV

Output current: 0.53A

Waveform deviation factor:≤3%

Measurement winding voltage ratio:1000:1

Insulation level: low voltage input terminal to ground power frequency voltage withstand level 5kV/1min

Dielectric loss: <0.3%

Noise:≤60dB

Partial discharge: 0-250kV ,the partial discharge is ≤1-3PC; 0-280kV, the partial discharge is ≤3-5pc

Running time: under rated voltage and current,start form environment temperature,can run 30min.

under 2/3 rated voltage and current, continuous running.

Single test transformer impedance : 3%-12%

Waveform deviation factor: <3%

2.Technical Parameter for Automatic console

Phase:single phase

Frequency:50Hz

Rated capacity:150kVA

Input voltage:0.4kV

Input current:375A

Output voltage:0~400V

Output current:0.53A

Waveform deviation factor:≤3%

Insulation level: low voltage input terminal to ground power frequency voltage withstand level 5kV/1min

Insulation level:<0.3%

Noise: ≤60dB

Partial discharge: 0-400V , the partial discharge ≤1-3PC

Running time: under rated voltage and current,start form environment temperature,can run 30min. under 2/3 rated voltage and current, continous running.

3.Technical Parameter for for coupling voltage divider

Mode: HM-TRF-280

Rated frequency: 50Hz

Capacity: 500PF10%

Rated voltage : 280kV

Divider ratio: 1000:1

Dielectric loss:<0.5%

Precision: 1.5

Partial discharge: under 280kV , ≤3~5PC; under 250kV, ≤1~3PC

Error rang of capacity and divider ratio: ±1.5%

Loss Angle tangent of capacitor dielectric: Pure capacitor voltage divider, under 20℃, 0.4-0.5UN, tgδ≤0.0025.

4.Technical parameter for power isolating transformer

Mode: HM-GLB-150/0.4

Rated capacity:150kVA

Rated voltage ratio:0.4/04kV

Rated current ratio :375/375A

Rated frequency: 50~60Hz

Number of line:2 line

Quality factor of filter reactor:>70

Partial discharge background level : under 280kV, ≤3~5PC; under 250kV, ≤1~3PC

Filter attenuation characteristic:40KHz-100KHz>40dB

100KHz-1MHz>60dB

Insulation level:5kV/1min no anomaly discharge

1 (1)


After-sale Service


First Time Use guidance

For the first time use, technical staff will guide customer how to make testing at site.

Three-years Warranty

The warranty period of all equipment is three years, lifetime maintenance.

During warranty period, free maintenance or replacement are provided timely for any quality problem . Finally we will afford customer a satisfactory solution, whether repair, replace or return it back.

Trouble-shooting

fault that users can solve by themselves, we guarantee to give timely telephone guidance and bear the necessary cost .

If meet any fault not impossible to be solved by end-user, we will afford the best solution within 24 hours . Produce will be repaired within 10 days and delivery back to customer.

1 (2)(001)

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend