Welcome Customer !

Membership

XwbooElectrical & ElectronicsVoltage detectorVoltage detector Partial Discharge Measurement
  • $item.Title
  • $item.Title

Partial Discharge Measurement

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Voltage detector
Place of Origin
HuBei, WuHan

Wuhan Goldhome Hipot Electrical Co., Ltd.

Contact

Phone

13720185294

Fax

Related categories
PC amount: ≤5PC,at rated 60%voltage,≤3PCOutput voltage:0~100kV(Can be customized)Rated capacity:10kVA(Can be customized)Waveform deviation factor:≤3%
Introduction


Partial discharge measuring equipment is one higher requirement for hipot testers.

With the progress of basic scientific research , the application of new materials and new processes has pushed the new medium SF6 gas testing transformer to the application field of electric equipment.

Sf6 gas testing transformer is widely used as a new insulating medium because of its excellent insulation performance, arc extinguishing performance and non-combustibility.

After years of efforts, our company has successfully developed SF6 gas PD test transformer hipot tester.

Hot tags: Inflatable gas testing transformer, sf6 gas pd testing transformer, sf6 gas partial dischagre hipot testers,SF6 insulated HV with PD tester


Wire diagram of sf6 pd hipot tester


1 (1)


Sf6 insulated hv with pD tester parameter for 10kvA/100kV


1.Gas testing transformer specifictaion

Model No.: HM-YDQW-10kVA/100kV

Phase :single phase

Frequency:50Hz

Rated capacity:10kVA

Input voltage:0.2kV

Input current:50A

Output voltage:0~100kV

Output current: 0.1A

Waveform deviation factor:≤3%

Measurement winding voltage ratio:1000:1

PC amount: ≤5PC,at rated 60%voltage,≤3PC

2.Manual console specification

Model No.:HMTC-100

Phase:single phase

Frequency:50Hz

Rated capacity:10kVA

Input voltage:0.2kV

Input current:50A

Output voltage:0~200V

Output current:50A

Waveform deviation factor:≤3%

Insulation level: low voltage input terminal to ground power frequency voltage withstand level 5kV/1min

Insulation level:<0.3%

Noise: ≤60dB

PC amount: ≤5PC,at rated 60%voltage,≤3PC

3.Coupling capacitor specification

Mode: HM-TRF-100-0.01

Rated frequency: 50Hz

Capacity: 500PF10%

Rated voltage : 100kV

Divider ratio: 1000:1

Dielectric loss:<0.5%

Precision: 1.5

Partial discharge: ≤5PC,at rated 60%voltage,≤3PC

4.Isolation transformer technical parameter

Mode: HM-GLB-LNF-100

Rated capacity:10kVA

Input voltage:220V

Output voltage:220V

Output current:50A

Rated frequency: 50~60Hz

Number of line:2 line

Quality factor of filter reactor:>70

Partial discharge: ≤5PC,at rated 60%voltage,≤3PC


Different specifications can be customized.


1 (2)

Product Features

1.Filled with high-insulation strength SF6 gas as the insulating medium;

2.Small size, light weight, high-grade craftsmanship, beautiful appearance and convenient handling;

3.Due to the arc extinguishing performance of SF6 gas and its special process structure, its partial discharge is small, and the partial discharge under rated voltage is less than or equal to 3PC;

4.The test process is simple and intuitive, and the operator is cheap;

5.Can effectively eliminate the clutter interference in the power supply;

6.Automatic control technology can be used, with high degree of automation and strong anti-interference ability.

Precautions for use


1. The test personnel should do a good job division of responsibilities and set the safety distance of the test site.

2. Carefully check the grounding conditions of the tested object and the test transformer, and have a dedicated person to monitor safety and observe the status of the tested object .

3. The main parts of the tested object should be clear and clean, and kept absolutely dry, so as not to damage the tested object and cause the error of the test value.

4. For the test of large equipment, the no-load test of the test transformer should generally be carried out first, that is, the test power supply is raised when the test product is not connected, so that the indicating accuracy of the instrument can be checked.

5. During the test, if the following abnormal conditions are found:

The indicator needle of voltage and ammeter swings greatly;

The test object makes an abnormal noise;

Found that the insulation is scorched or smoked,

The voltage should be reduced immediately, the power supply should be cut off, the test should be stopped and the cause should be found out.


After-sale service


1.First-use responsibility system

After the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part

2.One year warranty

All products warranty is 1year, life-time maintenance .

During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !

3.Troubleshooting

If the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!

If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!

1 (3)

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend