Welcome Customer !

Membership

XwbooElectrical & ElectronicsVoltage detectorVoltage detector Partial Discharge Test Set
  • $item.Title
  • $item.Title

Partial Discharge Test Set

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Voltage detector
Place of Origin
HuBei, WuHan

Wuhan Goldhome Hipot Electrical Co., Ltd.

Contact

Phone

13720185294

Fax

Related categories
Voltage level: 100kV~1000kV.Capacity: 50-2000kVAInput voltage (primary voltage): 0.35-10kVPartial discharge capacity of the equipment: 1-3pc under the rated voltage (normal environment)

HMGTU Integration gas type partial discharge test set

I. Product introduction

With the development of my country's power industry, the voltage level of the power grid is getting higher and higher, and it has now reached a voltage level of 1000KV.

Electric power generation, power transmission and transformation, power supply and power equipment manufacturers have higher and higher requirements for the voltage level of test equipment, and the requirements for the capacity of test equipment are also increasing. Therefore, our company developed a high-voltage and large-capacity HMGTU Integration gas type partial discharge test setcombined electrical test device according to the actual needs of the market.

HMGTU Integration gas type partial discharge test setcombined electrical test device is suitable for high-voltage, large-capacity GIS, GIL power equipment insulation withstand voltage test, partial discharge test and accuracy test of GIS transformers. It is a necessary device for GIS substations, GIS, GIL power equipment manufacturers, basin insulators, and insulation structural parts manufacturers to conduct preventive tests and factory tests.

Adding a high-voltage casing interface to the equipment can lead to high-voltage, which can perform various high-voltage tests on traditional high-voltage equipment.


II. Basic performance of Integration gas type partial discharge test set

1. Technical indicators

Voltage level: 100kV~1000kV.

Capacity: 50-2000kVA

Input voltage (primary voltage): 0.35-10kV

Partial discharge capacity of the equipment: 1-3pc under the rated voltage (normal environment)

Temperature rise: the temperature rise is not more than 65k (50Hz) after running at rated current for 60 minutes

III.the test system composition

1. Basic system components

lPole type voltage regulator (GIS voltage transformer system adopts variable frequency power supply components)

lGLB power isolation transformer

lBCL type compensation reactor

lGTU type no partial discharge test transformer

lHigh voltage divider (capacitive type)

lA basic test interface

lDigital operation console

lCoupling capacitor

2. Available options

lPartial discharge tester

lSF6 high voltage bushing and isolating switch

lTest interface and isolation switch for different types of test products

lUniversal adjustment docking platform for GIS switch test

lStandard voltage transformer (only applicable to GIS voltage transformer test system)

lThree-phase test switch

lInsulator test tank

lPartial discharge standard injection port

lPeak voltmeter


IV. product advantages


1. The high voltage is fully sealed in a shielded space, and the test is safe and reliable

The device integrates the components required for high-voltage tests such as high-voltage boost, high-voltage measurement, high-voltage coupling capacitors, and high-voltage transformer standards in a fully sealed space; the parts that can be touched by the external human body are all ground potential, so there is no human body Encountered the danger of high voltage, this high voltage test equipment is also the safest kind of high voltage test equipment.

There are two ways to generate high voltage: one is to use the inductance of the reactor and the capacitance of the tested product to achieve voltage resonance, and obtain high voltage and large current on the tested product. The second is to use a high-voltage transformer to directly generate the required high voltage.

No matter which method is used, the high pressure generated is sealed in a container with good sealing and shielding.

2. The overall partial discharge can be controlled within 1-3pc

There is no external interference when high-voltage test is performed, especially when there is no partial discharge test. The test effect can be compared with the effect in the shielded room. The overall partial discharge of the test equipment can be controlled within 1-3pc.

3. Small size, the smallest space available, and light components

All components are sealed in a space, and there is no high voltage outside, which reduces the test safety distance and requires less space for the test; there is no need for additional wiring between the components, and the test is convenient!

4. Built-in high-voltage isolation switch to realize multiple functions in one machine

The built-in high-voltage isolating switch can separate multiple test product interfaces to isolate different types of test product interfaces (SF6 high-voltage bushings), realizing one machine with multiple functions.

5. Easy to connect, connect directly with the tested product, the test is more convenient

The universal docking platform makes the connection of the test equipment and the GIS sample handy; the three-phase switch makes the test of the three-phase common box system convenient.

6. Rugged and durable structure that can withstand long-distance transportation

For the on-site test system, we install the voltage regulator, compensation reactor, power isolation transformer and operation control system in a small frame. This highly integrated structure has the advantages of convenient transportation and easy connection.

7. Reduced system power capacity requirements

The sealed high-voltage test transformer is a conventional transformer, and the required high-voltage voltage is obtained by changing the primary voltage of the test transformer through a voltage regulator. The compensating reactor is connected to the primary of the test transformer to compensate the capacitive current of the test product. Therefore, the equipment's requirements for system power capacity are greatly reduced.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend