Welcome Customer !

Membership

XwbooGeneral PartsPumpDiaphragm PumpPDSK Series Powder Transfer Pump
  • $item.Title
  • $item.Title

PDSK Series Powder Transfer Pump

Skylink Fluid Technology(shanghai) Co.,Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Diaphragm Pump
Place of Origin
,
BULK DENSITY MAX FLOW RATE 0.08-0.8 g/cm³ 2500 Kg/h AIR INLET MAX PRESSURE 3/4BSPT 8.6bar (125psi) LIQUID INLET MAX DIAMETER SOLIDS 38mm(1-1/2)BSPT 6.3mm(1/4) LIQUID DISCHARGE DISPLACEMENT PER STROKE 38mm(1-1/2)BSPT 1.2L(0.34gal) *1 cycle = 2 strokes CONNECTION TYPE MATERIAL BSPT(Threaded) AL/316L/CI ANSI DIN(Flanged) WEIGHT MAX SUCTI......

Characteristic

New perfect powder transportation equipment with low failure rate

  • Can replace the inefficient manual powder transportation mode and be directly applied to the transportation of solid powder to reduce air pollution and raw material waste
  • Adopts the fully closed transportation mode to directly transport the powder from the raw material container to the receiving container at the formula, so as to reduce dust pollution in the working environment and ensure personal safety
  • Maximum bulk density of transporting powder can reach 0.8g/cm3, the maximum siphon height can reach 5m, and the maximum transporting capacity can reach 5,500Kg/h
  • Intermittent high efficiency airflow induced fluidization system can optimize the material and gas ratio, reduce gas consumption and material gas-solid ratio, and prevent powder accumulation;​
  • Separated fluidizing gas and driving gas can avoid the oxidation and deliquescence of the material in contact with the air and the gas in contact with the powder can be further purified and dried separately, or use other gases.
  • Can replace air mixed transportation, screw transportation and scraper transportation
  • can continuously transfer dry powder with specific gravity up to 0.8g/cm3 without failure, such as carbon black, pigment powder, combustion supporting agent, expanded mica, silicone, acrylic resin, 3D printing powder, silicone resin and pharmaceuticals, etc.

Download

Dimensions

 

Material

PARTMATERIALS
Material of wetted partsAluminum alloy, 316L stainless steel
Material of non-wetted partsAluminum alloy(electrophoresis)
Air valveAluminum alloy(electrophoresis)
PARTMATERIALS
Santoprene-40°C to 107°C (-40°F to 225°F)
Neoprene-18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE)4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N)-12°C to 82°C (10°F to 180°F)
EPDM-51°C to 138°C (-60°F to 280°F)
Fluorine rubber (FKM)-40°C to 177°C (-40°F to 350°F)

 

 

未找到相应参数组,请于后台属性模板中添加
Since the establishment of the brand, SKYLINK, as a world-renowned diaphragm pump manufacturer, has been focusing on fluid transportation and providing solutions for users in various industries around the world.Our main products include pneumatic diaphragm pumps, electric diaphragm pumps, sewage pumps, high pressure pumps, powder pumps, sanitary pumps, rotor pumps and magnetic pumps. Our core markets include lithium batteries, environmentally friendly water treatment, pharmaceuticals, chemicals, coatings, mining and metallurgy, electronics and other industrial application markets.As an experienced industrial pump manufacturer, the SKL diaphragm pump series can transport not only ordinary fluid media, but also corrosive media, highly abrasive media, high viscosity media and powder particle media. Skyly can provide reasonable and efficient fluid transportation solutions according to the application and customer needs.Before leaving the factory, each equipment manufactured by SKL has undergone strict test operation and quality inspection, and has passed 3A, CE, FDA, ISO9001 and other certifications.
Similar Product Recommend