Welcome Customer !

Membership

XwbooGeneral PartsPumpCentrifugal PumpPFM03-30 EC Permanent magnet constant pressure variable frequency multistage pump
  • $item.Title
  • $item.Title

PFM03-30 EC Permanent magnet constant pressure variable frequency multistage pump

HEFEI XINHU CANNED MOTOR PUMP CO.,LTD

Model
Nature of the Manufacturer
Other
Product Category
Centrifugal Pump
Place of Origin
,
PFM03-30 EC Permanent magnet constant pressure variable frequency multistage pump

1 Product Application Conditions
1.1 Media requirements
Use medium: water
Medium water temperature: 0℃~50℃
Medium PH value: 6.5~8.5
Medium hardness: ≤25°dH
Solid impurity content in the medium: solid impurity diameter and length direction ≤ 0.1mm, and volume ratio ≤ 0.1%.
1.2 Use environment requirements
How to use: keep the axis horizontal
Altitude: <1000m
Operating environment temperature: 0℃~55℃ (no freezing phenomenon in the pipeline and water pump)
Use environment humidity ≤95%
1.3 Storage environment requirements
Storage ambient temperature: -20°C~60°C (no freezing in pipelines and pumps)
Storage environment humidity ≤95%
2. Product installation direction diagram
When the water pump is installed, the pump shaft must be in a horizontal position, and the pump shaft is allowed to be installed at an angle of ±5°. The installation of the water pump in the system should ensure that the pump cavity is filled with liquid so that the water pump can operate normally. Pipeline installation must be carried out according to the diagram, and the rubber pads should be well supported.
3. Start and stop of water pump
Start-up time: The start-up time of the water pump is less than 5s, that is, the time from power-on to maximum speed
Downtime: the pump stop time < 3s, that is, the time from when the pump is powered off to when it stops running

4. Basic parameters of the product

Maximum flow(m³/h):5.5 Maximum head(m):45 Voltage:AC 220V/50Hz
Rated flow(m³/h):3.0 Rated head(m):30 Maximum input power:600W
Design pressure:1.0MPa Protection class:IP44 Maximum speed:5000rpm
Noise:<58dB(A)(Max flow) Bare pump weight:9.2kg±5% Self-priming height:≤8m
Standby power consumption:≤10W Inlet and outlet pipe diameter:DN25 Steering: counterclockwise when viewed from the pump inlet

5. Product certification

Products comply with CCC, GS (CE), EMC, RoHS, REACH, WRAS certification requirements.

6. Motor type

Motor type: permanent magnet synchronous motorEnameled wire material: copperMagnetic steel material: NdFeB
DC cold state resistance of the motor at 20°C: 3.77±5%ΩInsulation class: F
7. Performance Curve

Flow-Power Performance Curves

Flow-Head performance curves


As a wholly-owned subsidiary of Zhejiang Dayuan Pumps Industrial Co., Ltd, (Shanghai Stock Exchange stock code: 603757), Shinhoo is specialized in canned motor pump Manufacturing. In order to satisfy the rising market demand, in 2007 our large production base was constructed with the total investment of 300 million Chinese Yuan in National Hi-Tech Developing Zone in Hefei, Anhui Province, China. In the end of 2009, our new plant with the floor area of 100,000 Square meters started running. Based on the standard of ISO 9001:2015 Quality management
Similar Product Recommend