Membership
Help
Dongguan Silent Industry Co., Ltd.
Dongguan Silent Industry Co., Ltd.
| General & Basic information | |||||||
| NO. | Description | Value | |||||
| 1 | Outer diameter | Φ12mm | |||||
| 2 | Type of Gearbox | Planetary | |||||
| 3 | Housing material | Metal | |||||
| 4 | Type of teeth | Straight | |||||
| 5 | Teeth material | Steel | |||||
| 6 | Output shaft material | Stainless Steel | |||||
| 7 | Bearing at output | Ball Bearing | |||||
| 8 | No-load backlash | ≤2° | |||||
| 9 | Number of stages availability | 1,2,3,4,5 | |||||
| 10 | Axial play | ≤0.1 mm | |||||
| 11 | Radial play(6.5mm from flange) | ≤0.03 mm | |||||
| 12 | Dynamic Max. axial load | ≤3N | |||||
| 13 | Max. force for press fits | ≤5N | |||||
| 14 | Max. radial force(6.5mm from flange) | ≤20N | |||||
| 15 | Operating temperature range | -40°C to +120°C | |||||
| 16 | Operating relative humidity | 20%RH to 90%RH | |||||
| * Normally the 1st stage gears to motor made by plastic in order to reducing noise if stage number more than 1. | |||||||
| Technical Data | |||||||
| NO. | Description | Value | |||||
| 17 | Number of gear stages | 1 | 2 | 3 | 4 | 5 | |
| 18 | Reduction ratio | 4:1 | 16:1 | 64:1 | 256:1 | 1024:1 | |
| 19 | Max. continuous input speed | 12,000rpm | 18,000rpm | 22,000rpm | 25,000rpm | 30,000rpm | |
| 20 | Max. intermittent input speed | 15,000rpm | 22,000rpm | 25,000rpm | 30,000rpm | 35,000rpm | |
| 21 | Max. continuous torque | 50mNm | 100mNm | 200mNm | 300mNm | 400mNm | |
| 22 | Max. intermittent torque | 75mNm | 150mNm | 300mNm | 450mNm | 600mNm | |
| 23 | Direction(from the driver to output) | Same | Same | Same | Same | Same | |
| 24 | Max. efficiency | 90% | 81% | 73% | 65% | 59% | |
| 25 | Weight without motor | 5.5 | 9.52 | 13.54 | 17.56 | 21.58 | |
| 26 | L2[mm]=Length without motor | 14.4 | 18.4 | 22.4 | 26.4 | 30.4 | |
| 27 | L1[mm]=Length with motor | The total length of gear motor depends on the motor specified. | |||||
| Reduction ratio | Motor pinion specifications | ||||||
| Material | Number of teeth | Length | Hole diameter | Pressure angle | |||
| 4:1 / 16:1 / 64:1 / 256:1 / 1024:1 | Stee | z=12 | L=2.4 | Φ1.5 | α=20° | ||

We are able to design and manufacture the products exactly to customers' requirements.