Membership
Help
Dongguan Silent Industry Co., Ltd.
Dongguan Silent Industry Co., Ltd.
| General & Basic information | |||||||
| NO. | Description | Value | |||||
| 1 | Outer diameter | Φ16mm | |||||
| 2 | Type of Gearbox | Planetary | |||||
| 3 | Housing material | Metal | |||||
| 4 | Type of teeth | Straight | |||||
| 5 | Teeth material | Steel | |||||
| 6 | Output shaft material | Stainless Steel | |||||
| 7 | Bearing at output | Ball Bearing | |||||
| 8 | No-load backlash | ≤2° | |||||
| 9 | Number of stages availability | 1,2,3,4,5 | |||||
| 10 | Axial play | ≤0.1 mm | |||||
| 11 | Radial play(6.5mm from flange) | ≤0.03 mm | |||||
| 12 | Dynamic Max. axial load | ≤5N | |||||
| 13 | Max. force for press fits | ≤25N | |||||
| 14 | Max. radial force(6.5mm from flange) | ≤30N | |||||
| 15 | Operating temperature range | -40°C to +120°C | |||||
| 16 | Operating relative humidity | 20%RH to 90%RH | |||||
| * Normally the 1st stage gears to motor made by plastic in order to reducing noise if stage number more than 1. | |||||||
| Technical Data | |||||||
| NO. | Description | Value | |||||
| 17 | Number of gear stages | 1 | 2 | 3 | 4 | 5 | |
| 18 | Reduction ratio | 3.8:1 4.6:1 6:1 | The ratio can be one of combinations of 3 ratios | ||||
| 19 | Max. continuous input speed | 8,000rpm | 10,000rpm | 15,000rpm | 18,000rpm | 21,000rpm | |
| 20 | Max. intermittent input speed | 10,000rpm | 15,000rpm | 18,000rpm | 21,000rpm | 25,000rpm | |
| 21 | Max. continuous torque | 200mNm | 400mNm | 800mNm | 1,000mNm | 1,200mNm | |
| 22 | Max. intermittent torque | 300mNm | 600mNm | 1,200mNm | 1,500mNm | 1,800mNm | |
| 23 | Direction(from the driver to output) | Same | Same | Same | Same | Same | |
| 24 | Max. efficiency | 90% | 81% | 73% | 65% | 59% | |
| 25 | Weight without motor(g) | 14.8 | 19.83 | 24.86 | 29.89 | 34.92 | |
| 26 | L2[mm]=Length without motor | 14 | 17.9 | 21.8 | 25.7 | 29.6 | |
| 27 | L1[mm]=Length with motor | The total length of gear motor depends on the motor specified. | |||||
| Reduction ratio | Motor pinion specifications | ||||||
| Material | Number of teeth | Length | Hole diameter (D) | Pressure angle | |||
| 6:1 / 36:1 / 216:1 | Steel Copper | z=8 | L=3.6 | Φ1.0 | α=20° | ||
| 4.6:1 / 17.8:1 / 21.5:1 / 27.8:1 / 69:1 / 100:1 / 167:1 /1026:1 | z=11 |
Φ2.0 | |||||
| 3.8:1 / 15:1 / 23:1 / 57:1 / 89:1 / 139:1 / 221:1 / 854:1 / 2066:1 | z=14 | ||||||

We are able to design and manufacture the products exactly to customers' requirements.