Membership
Help
Poocca Hydraulic (Shenzhen) Co., Ltd.
Poocca Hydraulic (Shenzhen) Co., Ltd.
Plastic machinery piston pumps A


PA A Series Variable Displacement Piston Pumps Under the conditions of pressure 16 MPa (2320 PSI) and speed 1800 r/min, the volumetric efficiency is over 98% and the overall efficiency is over 90%.
Name | A Series Variable Displacement Piston Pumps |
Series | Series A |
Sizes | 10 16 22 37 45 56 70 90 100 145 |
Nominal Pressure | 210 bar |
Maximum Pressure | 280 bar |
Operation Mode | Open Circuit |

Geometric Displacement cm3/rev | Minimum Adj. Flow cm3/rev | Operating Presure MPa (PSI) | Shaft Speed Range r/min | Approx. Mass kg (lbs.) | ||||
Model Numbers | (cu. in. /rev) | (cu. in. /rev) | 2 | 1 | Max. | Min. | Flange Mtg. | Foot Mtg. |
Rated | Intermittent | |||||||
A10 | 10.0 (.610) | 2 (.122) | 16 (2320) | 21 (3050) | 1800 | 600 | 5.1 (11.2) | |
A16 | 15.8 (.964) | 4 (.244) | 16 (2320) | 21 (3050) | 1800 | 600 | 16.5 (36.4) | 18.7 (41.2) |
A22 | 22.2 (1.355) | 6 (.366) | 16 (2320) | 16 (2320) | 1800 | 600 | 16.5 (36.4) | 18.7 (41.2) |
A37 | 36.9 (2.25) | 10 (.610) | 16 (2320) | 21 (3050) | 1800 | 600 | 28.0 (61.7) | 32.3 (71.2) |
A45 | 45(2.75) | 11(.671) | 16 (2320) | 21 (3050) | 1800 | 600 | 28.0 (61.7) | 32.3 (71.2) |
A56 | 56.2 (3.43) | 12 (.732) | 16 (2320) | 21 (3050) | 1800 | 600 | 35.0 (77.2) | 39.3 (86.7) |
A70 | 70.0 (4.27) | 30 (1.83) | 25 (3630) | 28 (4060) | 1800 | 600 | 58.5 (129) | 70.5 (155) |
A90 | 91.0 (5.55) | 56 (3.42) | 25 (3630) | 28 (4060) | 1800 | 600 | 72.5 (160) | 93 (205) |
A100 | 100(6.1) | 62 (3.78) | 21 (3050) | 21 (3050) | 1800 | 600 | 72.5 (160) | 93 (205) |
A145 | 145 (8.85) | 83 (5.06) | 25 (3630) | 28 (4060) | 1800 | 600 | 92.5 (204) | 117.5 (259) |
1:Whenever setting pressure, make sure the full cut-off pressure never exceeds the maximum intermittent pressure.
2:Care should be taken in cases of used at a higher pressure than the rated pressure, because operating terms may be restricted. For example, if used as per maximum illustrated operating conditions, intermittent time at maximum flow is restricted to under 1/5 of one cycle time and under six seconds simultaneously. Conditions may vary according to the actual working pressure and delivery (inclination angle of the swash plate). Consult factory or POOCCA sales representative for further information.
3:The table above shows specifications for using petroleum based oils. Pumps (customized design) for special fluids are also available. Their operating pressure and maximum shaft speed however differ from the values in the table above depending on the fluid type.
Range of operating temperature and viscosities may differ from those of petroleum based oils due to their characteristics.

High efficiency:Under the conditions of pressure 16 MPa (2320 PSI) and speed 1800 r/min, the volumetric efficiency is over 98% and the overall efficiency is over 90%.

Accomplishment of energy-saving:Because the overall efficiency is high and the cut-off characteristics is sharp, thus the input power may be saved.
Low noise level:In the "A16" pump, the noise level is as low as 57.3 dB(A) [at the full cut-off pressure 21 MPa (3050 PSI) with speed 1500 r/min one metre (3.3 ft.) horizontally away from pump head cover.]

Low noise level:Because of small power loss, it is possible to reduce the rise in oil temperature. Accordingly, capacity of a reservoir can be reduced.

A series plunger pump has the characteristics of high volumetric efficiency, energy saving, various control methods and strong flexibility.


The company was established in 2012.
We have a very professional technical team to solve problems for your hydraulic pump.
Our sales will reply to your product inquiries within 1 hour
Quality is guaranteed.
Warranty: 12 months

USING:
Notice:
When installing the hydraulic pump, the oil inlet of the pump must be placed upward.
When using this pump for the first time, inject clean hydraulic fluid into the pump through the oil inlet.
[Hydraulic fluid filling amount]
A10: 370cm³
A16, A22: 600cm³
A37,A45,A56: 1200cm³
A70: 2100cm³
A90, A100: 2500cm³
A145: 3300cm³