Welcome Customer !

Membership

XwbooPackaging MachineryPacking Auxiliary MaterialPlastic Sheet, Board & PanelPlastic PTFE Processing Parts
  • $item.Title
  • $item.Title

Plastic PTFE Processing Parts

Huzhou Ningxin New Material Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Plastic Sheet, Board & Panel
Place of Origin
ZheJiang, HuZhou

Huzhou Ningxin New Material Technology Co., Ltd.

Contact

Phone

Fax

0572-8083507
Plastic PTFE Processing Parts

PTFE Processing Parts:

The friction coefficient of polytetrafluoroethylene is only 1 / 5 of that of polyethylene, which is an important feature of perfluorocarbon surface. Because of the low intermolecular force between fluorine and carbon chain, polytetrafluoroethylene has no viscosity. Polytetrafluoroethylene has excellent mechanical properties in a wide range of temperature from - 196 ℃ to 260 ℃. One of the characteristics of perfluorocarbon polymer is that it is not brittle at low temperature. The density of PTFE is 2.14-2.20g/cm, almost no water absorption, and the equilibrium water absorption is less than 0.01%. Polytetrafluoroethyleneis a typical soft and weak polymer. The interaction between macromolecules is small, the rigidity, hardness and strength are small, and it will deform under the long-term stress.

Polytetrafluoroethylene is a typical plastic with cold fluidity, which is easy to creep under load. The creep of PTFE varies with compression stress, temperature and crystallinity. The higher the temperature is, the greater the creep is. When the crystallinity of PTFE is between 55% and 80%, the creep variable does not exceed 2%; when the crystallinity is below 55% and above 80%, the creep variable increases rapidly


PTFE Processing Parts

Company profile:

Huzhou Ningxin new material science and Technology Co., Ltd. is located in Deqing County, Zhejiang Province. It is a member of the fluorine plastics processing professional committee of China Plastics Association. It has been engaged in the development, production and sales of fluorine plastics products for nearly 20 years. Its main products are: polytetrafluoroethylene plate, rod, tube, film, various sealing gasket, washer, plastic special-shaped parts, fluorine plastics special mechanical products, etc. The company has obtained ISO9001 quality management system certification, and is rated as a provincial high-tech enterprise in 2019. In recent years, our company has a high reputation in marine engineering, ship industry, chemical anti-corrosion industry and mechanical parts. The product has obtained SGS test certificate, UL94 flame retardant certificate and FDA food level test certificate.

Over the years, the company's products are not only used in domestic petroleum, chemical industry, medicine, electronics, machinery, auto, smelting, shipbuilding, transportation and other fields, but also exported to many countries and regions, favored by the majority of users. Recently, the company has increased investment to develop new fluoroplastic materials and products, and launched more new products to meet the needs of more users at home and abroad.


Qualification certificate:


Qualification certificate



Qualification certificate

  Huzhou Ningxin New Material Technology Co., Ltd. is located in Deqing County, Zhejiang Province. It is a member unit of the Fluoroplastics Processing Committee of China Plastics Association. It has been engaged in the development, production and sales of fluoroplastic products for nearly 20 years. The main products are: PTFE sheets and rods , Tubes, films, various sealing gaskets, plastic special-shaped parts, fluorine plastic special machinery products, etc. The company has obtained ISO9001 quality management system certification and was rated as a provincial high-tech enterprise in 2019. In recent years, our fluoroplastic products have a high reputation in marine engineering, shipbuilding industry, chemical anti-corrosion industry, and mechanical parts. The product has obtained SGS test report, UL94 flame retardant report, and food grade test report issued by SGS. On May 1, 2020, we enable the new company name: ZheJiang NingQi Environmental Protection Material Technology Co., Ltd. After the establishment of the new company, the business scope has been expanded:increased the processing of engineering plastic products. Processing products including: PA6 nylon products, HDPE products, UHMW-PE products, PU polyurethane products, etc.Over the years, the company's products have not only been used in the domestic petroleum, chemical, electronics, machinery, automotive, smelting, shipbuilding, transportation and other fields, but also exported to many countries and regions, and are well received by users. In recent years, the company has increased investment to develop new fluoroplastic materials and products, and launch more new products to meet the needs of more users at home and abroad.
Similar Product Recommend