Welcome Customer !

Membership

XwbooGeneral Machinery Valve Butterfly ValvePneumatic Butterfly Valve
  • $item.Title
  • $item.Title

Pneumatic Butterfly Valve

Bundor Valve Technology co., Ltd.

Model
2''-44''/DN50-DN1200
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
TianJin, TianJin
Pneumatic Butterfly Valve 【Size Range】: 2''-44''/DN50-DN1200 【Pressure】: 5K/10K/150LB 【Body Materials】: CI/DI/WCB/CF3/ CF3M/CF8/ CF8M 【Seat Materials】: NBR/EPDM/PTFE/SI 【Disc Materials】: DI/WCB/CF3/ CF3M/CF8/CF8M/ C954 【Stem Materials】: 45#/410/ 2Cr13/Cr13/304/316stainless steel

ADVANTAGES

Adoptive Standards

Valve Design: API 609, MSS SP-67

Face To Face: API 609, MSS SP-67, DIN3202, BS EN558-1

Pressure Test: API 598

Flange Drilling: ANSI B16.1 class125, BS4504 PN10/PN16, DIN2501 PN10/PN16

Top Flange: ISO5211

Product Advantage

1.Bundor Valve patent product,Patent Number: .5;.9,The product side flange complies with many national and international standards such as GB, DIN, GOST, ANSI, BS, JIS,etc.

2.Valve body procurement QT450-10 material, spheroidization rate of 3 or more, mechanical properties fully up to standard, tensile strength 450Mpa, elongation rate greater than 10%, not easy to crack, crack

3.The valve body is solid body, the same DN weight is heavier than other manufacturers

4.Seat rubber uses standard EPDM rubber, making the butterfly valve's resilience and tension super stable and reliable, opening and closing more than 10,000 times without leakage.

5.The valve body uses an electrostatic powder thermal spraying process with a spray thickness of 250μm. The valve body is heated at 200°C for 3 hours, and the powder is cured at 180°C for 2 hours. After natural cooling, the surface adhesion is increased by 2 times than that of the ordinary powder, making it more environmentally friendly and weatherproof. Higher, to ensure that the valve body is not discolored for 36 months;

6.Pneumatic head adopts double-piston rack structure, precise meshing, high efficiency and constant output torque.

7.The cylinder body is an extruded aluminum alloy and hard anodized. The inner surface has a hard texture and high strength and hardness. The use of low-friction materials made of sliding bearings, to avoid direct contact between the metal, low friction coefficient, flexible rotation, long service life

8.Introducing the PE heat-shrinking plastic packaging technology of electronic products. Each of the products of Ruderland is individually wrapped with a heat-shrinkable film and has a built-in desiccant. The air dust is isolated to facilitate storage and avoid corrosion caused by moisture.

9.Every Ruide product has its own two-dimensional code identification from the accessories to the finished product, the unique ID ID number, to ensure that the product can be traced

10.The Gende intelligent detection equipment integrates standard data measurement and pressure detection. Each inspection report is automatically generated. Each data and report is saved for 5 years, ensuring that the factory qualification rate reaches 99%.

11.Bundor brand products are underwritten by Pacific Insurance Company with 10 million quality. The warranty is 2 years. Within two years, one is lost and one is lost. The quality of the product is unconditional.

Standard Test

Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.

Seat Test: 1.1 times the working pressure with water.

Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.

Special Test: On request, any other test can be carried out according to special instruction by client.

PARAMETER INFORMATION

DNNPS(inch)H1H2H3∅A∅BL
DN502"751293212510543
DN652.5"821363214512746
DN803"991533216014546
DN1004"11016732190.516552
DN1255"1251933221620056
DN1506"14520932241.322556
DN2008"17025140298.428060
DN25010"21028045361.935068
DN30012"24031545431.840078
DN35014"26034845476.244578
DN40016"295.5392.552540510102
DN45018"401.5322.552585565114
DN50020"451.5362.564650620127
DN60024"541.5428.570770725154
DN70028"​Temporary Absence Of Data
DN80032"
DN90036"
DN100040"
DN120044"
  Bundor Valve was established on August 5, 1994 with a registered capital of 102.3 million yuan. Factory is located in Tianjin city, China. As a professional manufacturer and supplier, Bundor mainly provides various types of butterfly valves, gate valves, check valves, globe valves, ball valves, balance valves, y-type strainers, rubber joints, flanges, pipe fittings etc. The products can comply with GB, ANSI, JIS, DIN, BS standard and are widely used in water treatment, HAVC, municipal engineering, water supply and drainage, petroleum, chemical and other industries.Bundor Valve factory has 216 sets of high precision equipment and 231 sets of product mould. It has set up a product testing laboratory, a material laboratory, a product life laboratory and has an independent research and development intelligent inspection center. At present, Bundor has passed TS A1, CE, 3C, ISO9001, ISO14001, OHSAS18001 certificates and holds 102 patents for inventions and designs. What`s more, Bundor Valve is a state-level high and new technology enterprise, a leading enterprise in the past 40 years of reform and opening up, a model enterprise of AAA grade good reputation. In 2015, Bundor was invited to participate in the Expo Milano, Italy. In 2017, Bundor were invited to participate in the Astana Expo and won the Gold Award.Bundor brand products were exported to over 76 countries and regions which spread in North America, Europe, Southeast Asia, Central Asia, the Middle East, South America, Africa etc. Bundor has provided more than 3000 types of valve products and severed more than 1200 customers all over the world. On average, more than 8699 pieces of quality products are sold all over the world every day.Bundor series trademarks have been registered in more than 100 countries and regions, including China, the United States, Madrid member states, European Union member states and African intellectual property countries. Now Bundor is looking for global distributors and agents. Welcome to all forms cooperation!
Similar Product Recommend