Welcome Customer !

Membership

XwbooGeneral Machinery Valve Butterfly ValvePneumatic diaphragm valve
  • $item.Title
  • $item.Title

Pneumatic diaphragm valve

Zhejiang Longzheng automatic control valve technology Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Butterfly Valve
Place of Origin
,
Pneumatic diaphragm valve

Pneumatic diaphragm valve is a special form of cut-off valve, appeared in the 1920s.Its opening and closing parts is a diaphragm made of soft material, the valve body cavity and valve cover cavity and drive parts separated, so called pneumatic diaphragm valve.The most prominent feature of pneumatic diaphragm valve is the diaphragm of the lower body cavity and upper valve cover chamber separated, so that the valve stem, valve disc and other parts located above the diaphragm from medium corrosion, leaving out the packing sealing structure, and will not produce medium leakage.

Purpose: This valve is specially designed for controlling non-corrosive or general corrosive media. The inner surface of the valve body is unlined or covered with a variety of alternative rubber, suitable for different working temperatures and fluid pipelines.Applicable temperature :≤85℃, ≤100℃, ≤120℃, ≤150℃(according to lining and diaphragm material)

Diaphragm separates the inner chamber of the lower valve body from the inner chamber of the upper valve cover, so that the valve stem, disc and other parts located above the diaphragm are not corroded by the medium, leaving out the packing sealing structure, and will not produce the medium leakage.

1, the use of rubber or plastic and other soft sealing diaphragm, good sealing.As the diaphragm is a vulnerable part, it should be replaced regularly according to the characteristics of the medium.

2, by the diaphragm material restrictions, diaphragm valve is suitable for low pressure and temperature is relatively low.

3, according to the structure of the diaphragm valve can be divided into: room type, straight flow, cut-off, straight through, gate type and right-angle type six;The connection form is usually flange connection;According to the driving mode can be divided into manual, electric and pneumatic three, pneumatic drive is divided into normal open, normal closed and reciprocating three.

4 generally not suitable for temperature higher than 60 degrees and conveying organic solvents and strong oxidizing medium in the pipeline, is not suitable for higher pressure pipeline using pneumatic diaphragm valve.

Zhejiang Longzheng automatic control valve technology Co., Ltd. relies on the scientific and technological environment, with the strength of excellent talents as the foundation, constantly improves the service to customers, meets customer needs, and strives to create brilliance together. Industrial environment determines the domain characteristics of enterprises participation in competition, and the development of industry restricts the development of enterprises to some extent. It can be divided into industrial characteristics, industrial life cycle, industrial development status and industrial competition structure.
You May Like
Similar Product Recommend