Welcome Customer !

Membership

XwbooGeneral PartsSealing ElementOther SealsPolyurethane O RingPolyurethane Seals
  • $item.Title
  • $item.Title

Polyurethane O RingPolyurethane Seals

Guangzhou Morgan Seals Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Seals
Place of Origin
GuangDong, GuangZhou
Polyurethane O Ring

Description

O-rings are circular sealing elements with circular cross-sections, may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. O-ring selection is based on chemical compatibility, application temperature, sealing pressure, lubrication requirements, durometer, size and cost. We offer you a range of elastomeric materials for both standard and special applications which allow the O-Ring to seal practically all liquid and gaseous media.

Advantages

Compact design
Easy assembly
Economic solution
Symmetry that reduces the risks of an assembly error

Technical data 

Temperature-30°C / +110°C
PressureUp to 60 MPa in static applications
  Up to 25 MPa in dynamic applications
SpeedIn linear applications only, up to 0.2 m/s
MediasMineral hydraulic oils
  Greases
  Air

Applications

O-Rings are used in a variety of fields: they are either used as sealing elements or as energizing elements for hydraulic slipper seals and wipers. Thus, the O-Ring is basically used in every field of industry including aerospace, automotive or general engineering. Today, O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, and reliable and have simple mounting.

Materials

PU (Polyurethane)

The polyurethane (PU) family has excellent mechanical features, such as wear resistance and tensile strength, and has a high elasticity compared to other rubbers.

Chemical   resistanceAliphatic   hydrocarbons (propane, butane)
  Mineral oils and greases
  Silicone oils and greases
  Water (up to +50°C max)
Compatibility   issueKetones,   esters, ethers, alcohols, glycols
  Hot water and steam
  Alkalis, amines, acids
Temperature   range-30°C /   +90°C
  -30°C / +110°C with special PUs


O-Ring Sizes

The o ring sizes are specified by the inside diameter and the cross section diameter. Morgan Rubber O ring seals are manufactured according to metric and imperial international standards such as GB3452.1-92, AS 568B, BS1516, DIN ISO 3601 and JIS standard. Morgan seals also accept custom sizes of almost any dimension, such as metric o rings, miniature O-rings, special O-rings with large dimensions and continuously moulded and spliced.

002.jpg

Cases

Morgan seals is the supplier of many famous customer, such as the Siemens Primetals, Baosteels .... The largest PU O ring we produced is the o-ring for Three Gorges Damn water-turbine generator(OD is 13000mm).

Large Size Rubber Seals.jpg

  Established by Guangzhou Mechanical Engineering Research Institute Co., Ltd. (51% share, hereinafter to be referred as GMERI) and Morgan Construction Co., Worcester, MA, U.S.A. (49%, hereinafter to be referred as Morgan, Worcester) in 2006, Guangzhou Morgan seals Company Ltd. is a professional manufacturer for sealing products. Combined the rich seals research and production experience of GMERI with the advanced technology and administration of Morgan, Worcester, the joint venture is renowned for its modern production lines, persisting research & development, strict quality control, quality sales and after-sales service. Guangzhou Mechanical Engineering Research Institute (GMERI) has been established since the year of 1959, and is a comprehensive first grade research institute directly under the former Ministry of Machinery Industry. GMERI is the expert in seals and lubrication field. It has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, GMERI also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Similar Product Recommend