Membership
Help
Kangsaite Automation Group Co., Ltd.
Kangsaite Automation Group Co., Ltd.
Introduction
Proportional adjustment type pneumatic angle seat valve is based on the pneumatic angle seat valve and is equipped with an electric positioner, which receives 4-20mA signal from the PLC control room to control the opening degree of the pneumatic angle seat valve.
Features
A. Stainless Steel Body Design.
B. Electrical Waterproof Connector.
C. With LCD Display.
D. Quick and easy start.
E. Additional Function.
Parameters
Material | PC,PA,Stainless steel,silicon rubber |
Power | DC 24V+/-10% |
Signal input | 4~20mA or 0~5/10V |
Setting signal input impedance | 4-20mA signal at 240Ω 0~5/10V signal at 21KΩ |
Compressed air requirements Partical model requirements Partical density requirements Pour point requirements Oil concentration requirements | Neutral gas comply with the requirements of DINISO 8573-1Class5(<40um) Class 5(<10mg/m³) Class 3(<20℃) Class 5(<25mg/m³) |
Ambient temperature | -20~55℃ |
Gas cinnection | In-line quick connector(inner diameter ∅8mm,6mm or1/4’’) |
Electric quick connector | M13x1.0three pin(cable diameter ∅5mm) M17x1.0nine pin(cable diameter ∅6mm) M13x1.0four pin(cable diameter ∅5mm) |
Air supply | Higher than the minimum operating pressure actuator 0.5~1bar,max7.0bar |
Position sensor stroke/stem stroke | 5~50mm |
Installation | Tend mounted actuators top m26 threaded connecton and actuators |
Protection class | Ip65,comply with the requirements of EN60529 |
Power consumption | <5W |
Application
The modulating pneumatic angle seat valves are widely used in canning, bottle and can systems, beer brewing and beverage technology, chemical industry, rubber machinery, food industry, textile printing and bleaching, vacuum technology, water treatment equipment, cleaning, disinfection, high temperature sterilization, washing Industrial fields such as machinery manufacturing. It can control steam, water, air, detergent, vacuum, coolant, beverage, soda fluid, oil, fuel, alcohol, alkaline solution, salt solution, hydraulic oil, etc. up to 260℃.
KST (Kangsaite) Group Qualification(Certificate)

←Stainless Steel Angle Seat Valve
Pneumatic Thread Angle Seat Valve→
Itelligent Pneumatic Valve Positioner
3-Way Diaphragm Valve
Flame Proof Type Pneumatic Valve Positioner
Valve Hand Wheel
Aluminum Aelly Pneumatic Actuator
Mini U-type Limit Switch Box