Welcome Customer !

Membership

XwbooMachine ToolPunchOther PunchesPunching Stainless Steel Plate
  • $item.Title
  • $item.Title

Punching Stainless Steel Plate

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.

Model
Nature of the Manufacturer
Other
Product Category
Other Punches
Place of Origin
,

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.

Contact

Mr. Bruce Lu

Phone

0086-13583155479

Fax

0086-531-87980587
Related categories
The hydraulic pressure system is mainly composed of oil tank, punching marking regulator, pressure system block and drill system block. Each part is connected with steel pipe or hose, and oil tanks are driven under the control of electrical CNC system to realize calibration, clamping, pressing, punching, drilling and marking etc.High pressure pump and low pressure pump is installed on the oil tank to provide hydraulic power to the whole system.

The power supply of this CNC punching machine for joint plates is AC380V, 35KVA, and distributed to a drive supply of AC415V, AC200V and a control supply of AC220V by master switch QF1, servo transformer, and control transformer. The drive supply of AC415V is for the motor of oil pump; the drive supply of AC200V is for servo motor; the control supply of AC220V is for CNC, DC24V regulated power supply, AC contactor, and magnet valves. The DC24V supply is for servo drive, CNC system, PLC and proximity switch.


扳机1.jpg


1. Brief Introduction:

The YBJ200 CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ200

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ200

1

Processing plate size

2000*500mm

2

Processing plate thickness

5-25mm

3

Punching force

1000KN

4

Maximum punching diameter

Φ26mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of CNC axes

2

8

X, Y axis servo motor power

2*2KW

9

X, Y axis feeding speed

20m/min

10

Punching speed

50-55 Times/Min

11

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.


Shandong Yudong Sunshine Machine Co., Ltd belongs to Sunshine Group, which is a stock company. The stock number is 100817. Sunshine Group established in 2006, the main products are the CNC drilling machine, CNC punching machine, CNC band sawing machine, CNC shearing machine, CNC cutting machine, CNC marking machine, CNC notching machine used for processing steel plates, steel angles, steel channels, steel flat bars and steel beams. Based on our good machine quality and good service, Sunshine already installed our CNC machines to more 50 coutires. Sunshine has oversea service center in India, Indonesia, Vietnam and Russia. Sunshine has professional technical engineers team which with more than 20 years for these kind of machines, also has professional international marketing team, service team to all of the oversea market. Yudong Sunshine can provide 7*24 after sale service to all customers by on line. We will establish group, whatsapp group between customer engineers and our engineer, and can provide on line service at any time if customer need. Also, we will provide to door service from our international service center of China, India, Indonesia and Vietnam. Based on our more than 20 years experience, good machine quality and good service, hope can have your machine inquiry and have a good cooperation with all customers from all countries.
Similar Product Recommend