Welcome Customer !

Membership

XwbooMachine ToolPunchOther PunchesPunching the Metal
  • $item.Title
  • $item.Title

Punching the Metal

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.

Model
Nature of the Manufacturer
Other
Product Category
Other Punches
Place of Origin
,

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.

Contact

Mr. Bruce Lu

Phone

0086-13583155479

Fax

0086-531-87980587
Related categories
The main machine is a special hydraulic press which is equipped with pressure apparatus and drill drift holding device. There are three drill drifts on the holding device. They are used to install punch and marking apparatus.The body of the machine uses Type C double-plate jointing structure with the advantage of rigid and high power of anti-eccentric load. The main cylinder is fixed on the body by four high strength bolts which is easy to install and convenient for maintenance.

CNC feeding worktable can be divided into fixed part and movable part. The fixed part is set on the ground which is linked with main unit. To the fixed part, alongside the front-back direction of main unit is called Axis Y, and then the fixed part is called Axis Y rack. The movable part is installed on the Axis Y rack through the guide bush which is rolling in straight line, under the driven by the servo motor and ball screw shaft, the movable part is running though the Axis Y to realize precise positioning. To the movable part, alongside the left-right direction of main engine is called Axis X, and then the movable part is called Axis X rack. Axis X rack is closed to the head of the main engine, on both sides which is installed a supporting plate with universal transmission ball to support the work piece. At the back of the Axis X rack, two rolling guide bushes are installed with a sliding plate on the direction of Axis X. Under the driven by the servo motor and ball screw shaft, the sliding plate can running though the Axis X to realize precise positioning.

7893e88be8c554eaba059f56bd9785d.jpg

1. Brief Introduction:

The YJX CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ120

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ120

1

Processing plate size

1500*800mm

2

Processing plate thickness

5-27mm

3

Punching force

1200KN

4

Maximum punching diameter

Φ33mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of print header groups

1 Group

8

Prefix

10 Pcs

9

Header size

(L*W*H)14*10*19mm

10

Number of CNC axes

2

11

X, Y axis servo motor power

2*2KW

12

X, Y axis feeding speed

20m/min

13

Punching speed

50-55 Times/Min

14

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

70250a944a6dd01bcffac902c66052e.jpg

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.


Shandong Yudong Sunshine Machine Co., Ltd belongs to Sunshine Group, which is a stock company. The stock number is 100817. Sunshine Group established in 2006, the main products are the CNC drilling machine, CNC punching machine, CNC band sawing machine, CNC shearing machine, CNC cutting machine, CNC marking machine, CNC notching machine used for processing steel plates, steel angles, steel channels, steel flat bars and steel beams. Based on our good machine quality and good service, Sunshine already installed our CNC machines to more 50 coutires. Sunshine has oversea service center in India, Indonesia, Vietnam and Russia. Sunshine has professional technical engineers team which with more than 20 years for these kind of machines, also has professional international marketing team, service team to all of the oversea market. Yudong Sunshine can provide 7*24 after sale service to all customers by on line. We will establish group, whatsapp group between customer engineers and our engineer, and can provide on line service at any time if customer need. Also, we will provide to door service from our international service center of China, India, Indonesia and Vietnam. Based on our more than 20 years experience, good machine quality and good service, hope can have your machine inquiry and have a good cooperation with all customers from all countries.
Similar Product Recommend