Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachinePure Sine Wave Inverter
  • $item.Title
  • $item.Title

Pure Sine Wave Inverter

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
I、Overview HMDK Pure Sine Wave Inverter, this power supply uses a large-capacity lithium battery pack as the power supply, converted by the inverter to output a pure 50HZ sine wave, the voltage is stable AC220V, small in size, light in weight and easy to carry. It not only solves the power...
I、Overview


HMDK Pure Sine Wave Inverter, this power supply uses a large-capacity lithium battery pack as the power supply, converted by the inverter to output a pure 50HZ sine wave, the voltage is stable AC220V, small in size, light in weight and easy to carry. It not only solves the power supply required for field test, but also can be used as a backup power supply for other field operations.

Pure Sine Wave Inverter is a kind of inverter, which is a power electronic device that converts direct current (power battery, storage battery) into alternating current (generally 220V, 50Hz sine wave). Inverter and ACDC converter are opposite processes. The ACDC converter or power adapter rectifies 220V alternating current into direct current for use, and the inverter has the opposite effect, hence the name.

Classification

There are many classification methods for inverters, which can be divided into three categories according to the nature of the output wave string: Pure Sine Wave Inverter, Square Wave Inverter and Trapezoidal Wave Inverter. Pure Sine Wave Inverter outputs sine wave alternating current, while square wave inverter outputs poor quality square wave alternating current.

Inverters are usually divided into voltage input type and current input type. Different from the DC chopper, the width of the modulating pulse is related to the sine wave, so the output current or voltage is close to the sine wave. Because a large number of inductive components are required to simulate a current source, current-supply inverters are rarely used for electric vehicle driving. Voltage input type inverter circuit structure is simple and can carry out two-way energy conversion, so almost all electric vehicles use this kind of inverter. A typical three-phase full-bridge voltage input inverter.

According to different needs, its output waveform can be square wave or pulse width modulation waveform. The pulse width modulation scheme can be divided into sinusoidal PWM, current hysteresis PWM, voltage space SVPWM and so on. The inverter can use PWM technology to output pulse width withered waveforms to induction motors and permanent magnet synchronous motors. A suitable solution can effectively suppress harmonics, make better use of DC voltage, and reduce DC voltage fluctuations.

II、Features


1. High performance and strong load capacity: advanced inverter technology, high power supply quality, and adapts to various loads, such as motors, electric drills, fluorescent lamps, gas lamps and other household appliances, communication equipment, and industrial equipment.

2. High reliability: Pure Sine Wave Inverter adopts advanced technology and redundant design, and is equipped with a power frequency transformer, which is controlled by CPU, and is carefully manufactured with high-quality components, stable performance and high reliability.

3. Perfect protection: Pure Sine Wave Inverter has input over-voltage and under-voltage protection; output overload and over-current protection; complete machine over-temperature protection, etc., which can resist the impact of high current starting load.

4. USB output interface: dual USB output interface (5V, 3000mA), which can charge phones and other devices.

5. Simple structure: The functional parts in the machine adopt modular design, the structure is simple, and the maintenance is convenient.

6. High efficiency and energy saving: The no-load current is small, which saves energy when there is no load.

7. Intelligent battery management: Intelligent battery monitoring and management system strengthens battery monitoring and extends battery life and utilization. The lower limit protection design of the DC power supply circuit. When the DC power supply is lower than the protection voltage, the inverter will sound an alarm and the working indicator will turn red.



III、Technical parameter


Continuous output power

2000 W

The output voltage

Pure sine wave AC 220V/50HZ

USB output interface

Dual USB output interface(5V,3000mA)

battery capacity

2000WH(76.8AH/29.4V)

Battery Type

Lithium ion battery

Charging time

4H

Charging voltage and current

DC29.4V /20A

Power saving mode

No-load power ≦16W

protect

Over voltage, over temperature, overload protection, automatic recovery

Working temperature

—20℃~60℃

Product Size(CM)

59X44X29 (Length*width*height)

product weight(KG)

25KG


IV、Panel introduction


The panel diagram is as follows:

details-

1. LCD screen: display the remaining power of the machine, real-time power consumption and other information.

2. Power switch.

3. Grounding post: used for the protective grounding of the instrument to protect the person and the equipment from a safe power outlet

4. USB port, 5V 3000A can charge phones and other devices.

5. Charging interface.

6. Internal battery power output

7. The internal power supply is switched on and off everywhere

8. AC220V/50HZ pure sine wave power supply.


V、Precautions


Working environment


Dry

Do not immerse in water or other liquid substances.

cool

When charging the power supply, the operating temperature should be guaranteed to be between 0 and 40°C; when discharging, the temperature should be between -20 and 65°C.

ventilation

To ensure heat dissipation, keep the airflow around the power supply unobstructed.

Safety

It is forbidden to use this product in flammable, explosive and corrosive gas environments such as gasoline, gas, etc.


Power charging:

Please use a dedicated power charging adapter to charge this machine.

When the remaining power is less than 10%, the load capacity of the power supply will be weakened. Please charge the power supply in time.

Please charge the power supply when it is turned off, and it is strictly prohibited to use it while charging.

Long-term inactivity will cause the battery to run out. Please make sure to charge it at least once every 1 month.

Generally, AC load equipment with less than the rated power of the machine can be used normally. However, when some electrical appliances are turned on, their power consumption is often greater than their rated power. For example, the starting current of inductive load equipment is generally 6-8 times the rated power, and the starting power of energy-saving lamps is dozens of times the rated power. The starting power is greater than the instantaneous maximum power that the power supply can withstand, thereby triggering the overload protection of the power supply.

VI.development path


The development of Pure Sine Wave Inverter technology has always been closely integrated with the development of power devices and their control technology. It has gone through five stages since its inception.

The first stage: From the 1950s to the 1960s, the birth of the thyristor (SCR) created conditions for the development of Pure Sine Wave Inverter.

The second stage: In the 1970s, the emergence of turn-off thyristors (GTO) and bipolar transistors enabled the development and application of inverter technology.

The third stage: In the 1980s, the advent of power FETs, insulated gate FETs and MOS controlled intertransistors laid the foundation for the development of high-power inverters.

The fourth stage: In the 1990s, the development of microelectronics technology enabled new control technologies such as vector control technology, multi-level control technology, fuzzy control technology and repetitive control to be better applied in the field of inverters. Greatly promoted the development of inverter technology.

The fifth stage: At the beginning of the 21st century, with the continuous progress and improvement of power electronic technology, modern control theory and microelectronics technology, inverter technology is moving towards high efficiency, high frequency, high reliability, high power density and intelligence. The direction of development.

VII.Application areas of Pure Sine Wave Inverter


New energy utilization

New energy refers to solar energy in a broad sense, which includes wind energy, water potential energy, chemical energy and so on. New energy sources such as solar and wind energy will become the main energy sources. These new energy sources are usually collected by photovoltaic cells made of semiconductor materials and converted into various kinds of electrical energy that people need by certain scientific and technological means. Inverter technology is one of the key technologies.

Eliminate harmonic pollution from mains

Effective management of harmonic pollution can not only improve the operation quality of electrical equipment and energy conservation, but also has a bearing on the issue of civil power safety. By rectifying the city power and using modern inverter technology to convert it to the city power standard, the harmonic pollution of the city power can be purified, and the safety of electrical equipment and users can be protected. Inverter is an important part of small wind power generation system, it undertakes the task of converting direct current into alternating current to supply power to the load.

Other application areas

Inverters are also widely used in many other fields, such as AC motor variable speed speed regulation, motor braking regenerative energy feedback, uninterruptible power supply system, induction heating, arc welding power supply, variable frequency power supply, etc.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend