The QJB series mixer have been designed for a wide range of applications. The units can, for example, be used for many mixing and stirring applications in sewage treatment plants and in industrial and chemical processes.
The submersible mixers can be installed in all tank shapes and sizes. Depending on the requested intensity of mixing and flow formation, one or more mixers may be installed in a single tank.
Features:
Name Description
Motor | IP68, F class insulation, 50 or 60 Hz, three phase Thermal sensor for each phase |
Propeller | Technically optimized, axially operating 3-blade propellers with very good self-cleaning effect for vibration-free operation. The propellers are designed to achieve high thrusts and therefore a high flow capacity in axial direction |
Mechanical seal | Double highly quality sealing unit using a SiC/SiC, independent of direction of rotation and resistant to temperature shock. |
Bearing | All bearings are lubricated-for-life and maintenance-free, with a calculated life time of more than 100,000 hr. |
Shaft | Strictly static and dynamic balance check to ensure the smooth operation |
Cable | 10 m sewage resistant CSM material. Type: H07RN. |
Protection | With DI sensor located in oil chamber, it will detect any moisture before enter into the motor chamber from the shaft seal. And give you timely warning about the problem occurred. |
Materials:
Specification Material
Motor casing | SS304 ( SS316 for optional) |
Shaft | SS420 |
Propeller | SS304 ( SS316 for optional) |
Mechanical seal | WuC / SiC or SiC / SiC |
Sliding bracket | SS304 ( SS316 for optional) |


Submersible mixer must be installed like above position for different shape of pond.
Submersible selection
Power consumption P ≧ V(m3) * C (w/m3) * k1 * k2 * k3
V --- Volume of water to be treated
C --- Power consumption per m3 clean water, generally 4.8w/m3
K1 --- Correction factor of medium density, generally 1.1~1.15
K2 --- Correction factor of pond shape, generally 1.06~1.1
K3--- Service factor, generally 1.2
Final formula: Mixer power P (w) ≧V (m3) * 6.8 (w/m3)
Mixer model selection and calculation paper
Installation:
The mixer should be installed as deep as possible.
- If in one tank, 2 or more mixer installed, in order to have good stirring performance, each mix flow should be continuous to connect to others, and will not interaction each other.
- Distance between floor and blade's top edge should be more than 400mm,like below figure, HMIN>400mm. If lower than Hmin, the mix flow will hit the floor, and not stir the water, waste the energy.
- Distance between water level and blade's top edge should be minimum 1.5 times of blade diameter. Like below figure, HABOVE>1.5 times D ( impeller diameter) , If lower than Habove, the mix flow will hit above the water level, also waste the energy.
- Distance between wall and top blade should be at least 2 times of impeller diameter. Lmin > 2 times D ( impeller diameter) If lower than this distance, there maybe vibration, and easy damage the mixer.
Technical data:( On the basis of 380v / 50Hz/3ph)
Rated Power : 3.5/2.5 HP/kW
Rated current: 8 A
Propeller Dia. : 400 mm
Speed:740 rpm
Wt.:70kg
Nanjing Victor Environmental Technology Co., Ltd. specializes in the production of energy-saving submersible mixers, submersible flow propellers, hyperboloid/vertical mixers, sludge re-circulation pumps, grille cleaners, conveyors, sand water separators, submersible aerators, various types of scrapers and suction machines, Y series motors, RJC series long shaft deep well pumps, QJC submersible well pumps and submersible sewage pumps, submersible mixed-flow pumps, integrated prefabricated pumping stations and other environmental protection equipment and sewage treatment equipment. We also undertake general contracting projects for various sewage treatment equipment, desalination project and landfill leachate project.We make use of ISO quality management model to make sure that we continuously, rigorously and actively implement all-staff quality management of all employees. To ensure product quality, first of all, the point is to enhance the evaluation of tenders and contracts, focusing on reviewing the technical performance of products to ensure that products satisfied or exceed customer’s requirements. In terms of design, our company has compiled "Design and Development Plan Control Program", "Design Control Program", "Design Review and Verification Program", "Design Change Program". The technical department do the design according to the above control procedures maximally meets the customer's requirements. In terms of after-sales service, we timely provide maintenance instructions, provide free installation and commissioning for customers according to the contract, establish and perfect the after-sales service network, collect user feedback, and provide customers with necessary information for product use and improvement.Nanjing Victor takes the harmonious development of environment as its responsibility. Our aim is to build green mountains and clean water and actively devote to building a harmonious and beautiful globe with everyone.