Quick temperature variation chamber (ESS)
Quick temperature variation chamber (ESS)
This chamber is used to test industrial products for the early detection of structural and manufacturing defects. Models with a rate of temperature change of 5℃/ min, 10℃/ min, 15℃/ min are produced.
Technical specifications:
Model | KWGD7025HD | KWGD705HD | KWGD710HD |
Internal volume | 252 L | 504 L | 1000 L |
Internal dimensions (D*W*H) | 600*600*700 mm | 700*800*900 mm | 1000*1000*1000 mm |
External dimensions (D*W*H) | 1750*900*1800 mm (approximately) | 2150*1050*1950 mm (approximately) | 2600*1300*2100 mm (approximately) |
Performance |
Temperature range | -70…+150℃ |
Temperature fluctuation | ≤±0.5℃ |
Temperature uniformity | ≤2℃ |
Temperature deviation | ≤±2℃ |
Range of temperature variation | -40...+80℃ or -55...+80℃ |
Temperature variation time | 5℃/min~15℃/min |
Materials |
Shell material | Cold rolled sheet steel, spray plastics on surface |
Internal material | Stainless steel |
Thermal insulation material | Polyurethane foam + glass wool |
Refrigeration system |
Refrigeration mode | Mechanical compression, two-stage refrigeration |
Compressor | Imported semi-closed compressor |
Cooling mode | Water cooling |
Heater | Nickel-chromium alloy heating wire |
Blower | Centrifugal blower |
Temperature sensor | Pt100 |
Controller | Touch screen, program and parameter control |
Power supply | AC380V, 50Hz, Three-phase four-wire + earth wire |
Hyde Science and Technology Limited, established in 2010, is a high-tech corporation with equipment development, production, sale and maintenance integrated. Our company is engaged in studying and developing the climate testing techniques, manufacturing environmental testing equipment, researching and developing management software. Our main equipment are: temperature test chamber, temperature humidity test chamber, high low temperature/ low air pressure test chamber, thermal vacuum chamber, thermal shock testing chamber (2/3 areas), salt fog chamber, sand and dust test chamber, rain spray test chamber, temperature humidity vibration test chamber, walk in temperature (humidity) test chamber, customized test chamber, drying oven, etc.. These products are widely used in aerospace, electrical and electronics, instrumentation, national defense industry, solar modules, auto parts, biological medicine, universities and colleges, etc.. We also reach cooperation arrangements with domestic first line manufacturers of mechanical equipment and measuring equipment, sell various types of mechanical measurement and testing equipment, such as vibration system, shock / bump system, centrifuges, tilting and swing system, CMM (coordinate measuring machine) and various nonstandard customized mechanical equipment, to satisfy the diversified demands of customers. We keep professionalism, dedication and innovation, constantly increase our technical power, create good conditions of new equipment and technology to all our customers. We are proud of your successes and sincerely hope for long term and mutually beneficial cooperation with you.