Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
● Rodantenna with integrated hermetical design, suitable for the applications where steam,vapor, condensation and crystallization can easily occur and applications witha stirrer.
● LUIdisplays the echo signal, convenient for troubleshooting.
● Intrinsicsafety explosion protection certified infrared handheld programmer for wirelessremote set up.
Measurable liquids | Dielectric constant | DK>1.6,(for liquids withεr<3,waveguide shall be used) |
Antenna | Type | Rod antenna |
Material | PP, PTFE, or 316 stainless steel outlined with PTFE | |
Measurement parameters | Transmit frequency | 5.8GHz |
Measurement range | 20m | |
Blind limitation | 0.05m (count from the reference point) | |
Deviation | From reference point to 600mm: 40mm. Other area: 0.1% of full range or 10mm, whichever is larger. | |
Repeatability | ±5mm | |
Power supply | DC | Rated 24V DC, Max.30V DC |
AC | Rated 220V AC, 50HZ | |
Signal output | Analog output | 4~20mA (±0.02mA) |
Communication protocol | HART, PROFIBUS-PA | |
Fault protection | Programmable high, low or hold | |
Operation condition | Process pressure | Depends on flange size |
Process temperature | -40~200℃ | |
Ambient temperature | -40~80℃ | |
Installation level | I | |
Pollution degree | IV | |
Approval | Ingress protection rating | IP67 |
Explosion proof | Flameproof Enclosure: EXd IIC T4 Intrinsic Safety:EXia IIC T4 | |
Materials | External housing | Aluminum coated withpolyester powder. |
Process fitting | 316L |