KL-DDS06 is a remote control lock kit for sliding door refrigerator. It is used to lock/unlock the fridge doors. The operation distance is up to 100 meters(1). This device is widely used on different sliding doors of refrigerators or other places.
Tech data
| Product Name | Remote Control Lock for Sliding Door Refrigerator |
| Input | AC 85-240V |
| Output | DC12V |
| Standby Current | 5mA |
| Frequency | 433.92MHz |
| Sensitivity | -105dBm |
| Rated Current | 1A |
| Dimension | 110*58*47mm (Controller) |
Packing List
- Remote Controller(KL-DDS06) *1pc (with 100cm power cable)
- Remote Control (KL600-2) *1pc (with built-in battery and wall holder)
- Lock & Spring Bolt *2sets (with 185cm power cable pre-installed)
- Output Cable *2pairs (18cm, pre-installed)
- Key *2pcs
- Metal Holders * 4pcs
- Iron Wire Key *2pcs
Operation
1.Program: Press and hold the learning button till the LED blinks, then release. Press any button of remote control, LED OFF. Program is done. Maximum 10 remote controls can be programed.
2.Clear memory: Press and hold the learning button until LED from ON to OFF, then release. All stored remote controls’ ID will be cleared.
3.Using:
1) Press button A of the remote control, the two locks unlock at same time, and buzzer rarely beeps. After 5 seconds, it re-lock again.
2) Press button B to lock before 5 seconds.
3) User can keep it always unlock by the key manually when power off.
Operation
Please don’t press button A and B at same time, otherwise, it may damage the receiver.
(1): The operation distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly depending on the installation and operating environment.







