KL-DDS04 is a remote controller for compatible electric lock. It is used to switch on the lock by a remote control. The operation distance is up to 150 meters(1). This device is widely used in storage cabinet, showcase, bookcase, locker and so on.
Tech data
| Product Name | Remote Controller for Electric Lock |
| Input | DC12V |
| Output | DC12V |
| Standby Current | 5mA |
| Frequency | 433.92MHz |
| Sensitivity | -105dBm |
| SMax Load | 1.2A |
| Channels | 2 |
| Dimension | 94*45*28mm (include enclosure) |
Packing List
- Remote Controller(KL-DDS04) *1pc
- Remote Control (KL300-2) *1pc (with built-in battery)
- DC adapter (DC12V 1A) *1pc
- Cables for lock connection *2 pairs (Pre-installed)
Diagram

Operation
1.Program: Press and hold the learning button till the LED blinks, then release. Press any button of remote control, LED OFF. (If you press remote control now, the controller will short beep.)
2.Clear memory: Press and hold the learning button until LED from ON to OFF, then release. All stored remote controls’ ID will be cleared.
3.Installation: Connect the compatible E-lock(s) to Output 1 or/and Output 2. Then plug in the power adapter.
Using: Press button A on the remote control, the controller short beeps, and the lock will unlock. The same as button B.
Attention
Please don’t press button A and B at same time, otherwise, it may damage the receiver.
(1): The operation distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly depending on the installation and operating environment.







