Membership
Help
Sinomeasure Automation Technology Co,Ltd
Sinomeasure Automation Technology Co,Ltd
| Product | Electromagnetic flowmeter |
| Model | SIN-LDG |
| Diameter Nominal | DN10~DN1000 |
| Nominal Pressure | 0.6~4.0MPa |
| Accuracy | ±0.5%,±2mm/s(flowrate<1m/s) |
| Liner material | PFA,F46,Neoprene,PTFE,FEP |
| Electrode material | Stainless steel SUS316, Hastelloy C, Titanium, |
| Tantalum Platinum-iridium | |
| Medium Temperature | Integral type: -10℃~120℃ |
| Split type: -25℃~120℃ | |
| Power supply | 100-240VAC,50/60Hz |
| Ambient Temperature | -10℃~60℃ |
| Electrical conductivity | Water 20μS/cm other medium 5μS/cm |
| Structure type | Tegral type, split type |
| Ingress protection | IP68 |
| Product Standard | JB/T 9248-1999 Electormagnetic Flowmeter |
Introduction
SIN-LDG Remote Type electromagnetic flowmeter is applicable for all conductive liquids, such as water, acids, alkalis, slurries and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. It can both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions.
Application
Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc
Description
| LDG-SIN -M1-DN50-J1-D2-I2-V1-P3-T1-E1-L2-G2-B1-IP1 | Description | ||||||||||||||
| LDG-SIN- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| Type | M1 | Compact type | |||||||||||||
| M2 | Remote type | ||||||||||||||
| Pipe size | DNXX | DN10 - DN2000 | |||||||||||||
| Accuracy | J1 | 1.00% | |||||||||||||
| J2 | 0.50% | ||||||||||||||
| Output | O0 | No output | |||||||||||||
| O1 | Pulse output | ||||||||||||||
| O2 | 4-20mA output | ||||||||||||||
| Communication | D0 | No | |||||||||||||
| D1 | RS232 | ||||||||||||||
| D2 | RS485 | ||||||||||||||
| D3 | HART | ||||||||||||||
| Installation | I1 | Thread installation | |||||||||||||
| I2 | Flange installation | ||||||||||||||
| I3 | Clamp mounting | ||||||||||||||
| I4 | Clamp installation | ||||||||||||||
| Power supply | V1 | 220VAC | |||||||||||||
| V2 | 24VDC | ||||||||||||||
| V3 | Battery powered | ||||||||||||||
| Pressure rating | P1 | 0.6MPa | |||||||||||||
| P2 | 1.0MPa | ||||||||||||||
| P3 | 1.6MPa | ||||||||||||||
| P4 | 2.5MPa | ||||||||||||||
| P5 | 4.0MPa | ||||||||||||||
| PZ | Others | ||||||||||||||
| Temperature rating | T1 | ≤60℃(CR/PU) | |||||||||||||
| T2 | ≤120℃(F4/F46) | ||||||||||||||
| T3 | ≤150℃(PFA) | ||||||||||||||
| Electrode material | E1 | 316L stainless steel | |||||||||||||
| E2 | Titanium | ||||||||||||||
| E3 | Tantalum | ||||||||||||||
| E4 | Hastelloy B | ||||||||||||||
| E5 | Hastelloy C | ||||||||||||||
| E6 | Platinum | ||||||||||||||
| E7 | Tungsten carbide | ||||||||||||||
| Lining material | L1 | Neoprene(CR) | |||||||||||||
| L2 | Polyurethane(PU) | ||||||||||||||
| L3 | F4/PTFE | ||||||||||||||
| L4 | Teflon(F46/FEP) | ||||||||||||||
| L5 | Tetrafluoroethylene(PFA) | ||||||||||||||
| Grounding | G0 | No grounding | |||||||||||||
| G1 | Grounding ring | ||||||||||||||
| G2 | Grounding electrode | ||||||||||||||
| G3 | Grounding screw | ||||||||||||||
| Body material | B1 | Carbon steel | |||||||||||||
| B2 | 304 stainless steel | ||||||||||||||
| B3 | 316 stainless steel | ||||||||||||||
| Ingress protection | IP1 | IP65 | |||||||||||||
| IP2 | IP67 | ||||||||||||||
| IP3 | IP68 | ||||||||||||||
Installation
Notice:
Do not install the electromagnetic flowmeter on a free-vibrating pipe without any support. Instead, a mounting base shall be used to secure the measuring tube.
When the electromagnetic flowmeter is required to be installed underground, the pipes at both inlet and outlet ends shall be provided with support items and a metal protection plate shall be installed above the flowmeter.
Wiring